#1: GTi Injectors Author: leigh_boy, Location: EastbournePosted: Tue Feb 15, 2011 3:36 am ---- are the 138 bhp and 180bhp injectors the same? i got a fault with injector 1 but don't know if there the same as a 180
#2: Re: GTi Injectors Author: Edward, Location: In the garagePosted: Tue Feb 15, 2011 6:03 am ---- Apprently the 180 injectors are different.
#3: Re: GTi Injectors Author: leigh_boy, Location: EastbournePosted: Tue Feb 15, 2011 8:29 am ---- hmm , would 180 injectors work on a 138???
#4: Re: GTi Injectors Author: Edward, Location: In the garagePosted: Tue Feb 15, 2011 11:59 am ---- Pointless unless you've got serious modifications.
#5: Re: GTi Injectors Author: leigh_boy, Location: EastbournePosted: Tue Feb 15, 2011 12:13 pm ---- i don't want it for any power inprovments just a case of what i can get hold of cheapst
i dont bother with mods not my style id rather just buy a faster car.
i have my bikes for speed
#6: Re: GTi Injectors Author: Lee180, Location: ScunthorpePosted: Tue Feb 15, 2011 12:25 pm ---- 180 injectors are bigger, im pretty sure. but dont take that as a biblical
i don't want it for any power inprovments just a case of what i can get hold of cheapst
i dont bother with mods not my style id rather just buy a faster car.
i have my bikes for speed
even if they physically fit you will need a remap to get the flow correct.
and not to mention you can't just fit 1 180 injector with 3 138 injector in line.
#8: Re: GTi Injectors Author: leigh_boy, Location: EastbournePosted: Tue Feb 15, 2011 12:36 pm ---- ok to the remap didnt really cross my mind, and i wouldnt replace just 1 i would do the lot
#9: Re: GTi Injectors Author: Edward, Location: In the garagePosted: Tue Feb 15, 2011 12:53 pm ---- Will physically fit but the flow rate will c**k things up.
#10: Re: GTi Injectors Author: intermilan206, Location: MalaysiaPosted: Tue Oct 29, 2013 11:37 am ---- bringing this thread up again...
what is the cc of 138 and 180 injectors?
#11: Re: GTi Injectors Author: 206gt160, Location: BlackburnPosted: Sun May 25, 2014 3:04 pm ---- Bump
#12: Re: GTi Injectors Author: intermilan206, Location: MalaysiaPosted: Mon May 26, 2014 12:08 am ---- GTI138
▪ Static rate to 3 bar, n-heptane unit [g / min.]: 141
▪ Resistance [Ohm]: 14.5
Part number: 1984 E2
GTI180
▪ Static rate to 3 bar, n-heptane unit [g / min.]: 187
▪ Resistance [Ohm]: 14.5
Part number: 1984 F3
Will physically fit but the flow rate will c**k things up.
Yet to remap mine and the 180 injectors have been fine, no engine management lights or erratic jumping rev's.
#14: Re: GTi Injectors Author: Edward, Location: In the garagePosted: Fri Feb 13, 2015 4:48 pm ---- That doesn't mean everything is right.
#15: Re: GTi Injectors Author: 206gt160, Location: BlackburnPosted: Fri Feb 13, 2015 4:51 pm ---- Very true, who would you recommend to remap when I get it booked in.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [320]:
Visitors: 319
Members: 0
Staff Online Now:
Page Views:
General
