#1: Masked valeo alignment Author: Abzynthe, Posted: Mon Mar 07, 2011 12:58 pm ---- how do you change the alignment on masked valeos (crystals?) without the motor?
Mine are Waaaaaay off.
Thanks
#2: Re: Masked valeo alignment Author: Lee, Location: EnglandPosted: Mon Mar 07, 2011 1:01 pm ---- You need the motor, either a manual one or an electric one. It's the motor that holds it in place.
#3: Re: Masked valeo alignment Author: MrBSI, Location: What's it to you? ? ?Posted: Mon Mar 07, 2011 1:02 pm ----
Abzynthe wrote:
how do you change the alignment on masked valeos (crystals?) without the motor?
Pointless, you need the adjustor motors fitted as they control the up / down position of the reflector.
Without the motor fitted in place correctly the reflector will just move about.
#4: Re: Masked valeo alignment Author: drunknmunky, Location: Blackburn and CatterickPosted: Mon Mar 07, 2011 1:05 pm ---- what if once you have the motor in there still out how can you adjust them then?
mine seem to be high on the passenger side and really low on the drivers side Last edited by drunknmunky on Mon Mar 07, 2011 1:06 pm; edited 2 times in total
what if once you have the motor in there still out how can you adjust them then?
Need to know this too, just put my crystals in
#6: Re: Masked valeo alignment Author: MrBSI, Location: What's it to you? ? ?Posted: Mon Mar 07, 2011 1:07 pm ----
Antknee wrote:
drunknmunky wrote:
what if once you have the motor in there still out how can you adjust them then?
Need to know this too, just put my crystals in
MOT garage & slip the lads a couple of drinks
#7: Re: Masked valeo alignment Author: Mike_XS, Location: SouthamptonPosted: Mon Mar 07, 2011 1:08 pm ---- Play round with the white adjusting knobs...They're an allen key fitting. Turn them and the lights go up/down.
#8: Re: Masked valeo alignment Author: DJ-, Location: UKPosted: Mon Mar 07, 2011 1:13 pm ---- sorry, needed them for my morettes
#9: Re: Masked valeo alignment Author: MrBSI, Location: What's it to you? ? ?Posted: Mon Mar 07, 2011 1:17 pm ----
AsphericSmile wrote:
Play round with the white adjusting knobs...They're an allen key fitting. Turn them and the lights go up/down.
Might as well get them set up spot on with the correct professional equipment for a couple of drinks
#10: Re: Masked valeo alignment Author: Antknee, Location: ManchesterPosted: Mon Mar 07, 2011 1:25 pm ---- nice one might have to give it a go tomorrow, see if they will do it for a couple of beer tokens
I didnt even notice they werent there until i drove it last night.
Ill take it to the garage tomorrow and see if they can do it
#12: Re: Masked valeo alignment Author: MrBSI, Location: What's it to you? ? ?Posted: Mon Mar 07, 2011 1:27 pm ----
Abzynthe wrote:
DJ- wrote:
sorry, needed them for my morettes
I didnt even notice they werent there until i drove it last night.
Ill take it to the garage tomorrow and see if they can do it
Remember to fit the adjustors first
#13: Re: Masked valeo alignment Author: bashyy1, Location: Milton KeynesPosted: Mon Mar 07, 2011 1:28 pm ---- do it at night parked facing a wall:) jus sayin
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17134
Online Now [537]:
Visitors: 536
Members: 0
Staff Online Now:
Page Views:
General
