#1: how to remove rear axle Author: liambez, Location: lincolnPosted: Mon Mar 07, 2011 1:33 pm ---- hi all anyone have a how to remove rear axle guide around at all. if you do can u pass it on or any links to a how to much appreciated as drivers side trailing arm bearings gone been told its easier and cheaper 2 replace the lot.
#2: Re: how to remove rear axle Author: cartoonhead, Location: North ManchesterPosted: Mon Mar 07, 2011 1:35 pm ---- 2 flexi break pipes , 2 handbreak cables , 2 abs wires if you have it and then 4 torx bolts and its off
#3: Re: how to remove rear axle Author: liambez, Location: lincolnPosted: Mon Mar 07, 2011 1:37 pm ---- gatherd that much lol but drivers side drum seems to be well and truly bedded on ( think at some point car has been round a lappost as this side of the car has all the problems and has been sprayed again but very poorly.
#4: Re: how to remove rear axle Author: MrBSI, Location: What's it to you? ? ?Posted: Mon Mar 07, 2011 1:38 pm ----
liambez wrote:
drivers side trailing arm bearings gone been told its easier and cheaper 2 replace the lot.
Normally by the time you notice the bearing has failed its done much more expensive damage to the rest of the axle
#5: Re: how to remove rear axle Author: liambez, Location: lincolnPosted: Mon Mar 07, 2011 1:50 pm ----
MrBSI wrote:
liambez wrote:
drivers side trailing arm bearings gone been told its easier and cheaper 2 replace the lot.
Normally by the time you notice the bearing has failed its done much more expensive damage to the rest of the axle
i got it as a project car swapped my ps3 for it lol so unsure how long its been like it as i know its been off the road since dec2009 but torsion bar etc is to flexible etc so i was just replacing the lot anyway but cant get the damn rear drum off to get at the handbreak cable and i dont have a angle grinder either. reckon my big hammer will ever crack the casing ?
#6: Re: how to remove rear axle Author: cartoonhead, Location: North ManchesterPosted: Mon Mar 07, 2011 2:05 pm ---- chop it and replace it as they can be bought for just 1 side.
i'd personaly replace both flexis and cables on a axle change even more so if the cars been stood since 2009
#7: Re: how to remove rear axle Author: liambez, Location: lincolnPosted: Mon Mar 07, 2011 2:11 pm ----
cartoonhead wrote:
chop it and replace it as they can be bought for just 1 side.
i'd personaly replace both flexis and cables on a axle change even more so if the cars been stood since 2009
they have all recently been replaced by previus owner and i can tell there new as still copper rather than greenand cables shiny otherwise i would just cut it lol
#8: Re: how to remove rear axle Author: Coolspot, Location: East SussexPosted: Mon Mar 07, 2011 4:51 pm ---- What size tork bolt ore on the axle and do you need a thing special to male sure the axle goes back on straight? i read a 206cc need (positioning calipers)
#9: Re: how to remove rear axle Author: Harry, Location: StaffordPosted: Mon Mar 07, 2011 5:47 pm ---- Was going to ask what cool asked about the bolt, I've angle grinded two axles off now I haven't figuired out what the hell the 4 bolts actually are and what socket is used to remove it it's like the reverse of a torx bolt..
#10: Re: how to remove rear axle Author: liambez, Location: lincolnPosted: Mon Mar 07, 2011 5:52 pm ---- i will let u lot know as soon as i find out i know its a e soming the female adaptor for torx heads as soon as i have axle of on wednesday i will update
#11: Re: how to remove rear axle Author: liambez, Location: lincolnPosted: Tue Mar 08, 2011 9:42 am ---- As promised but a day early lol the Torx bolts underneither holding the axle on need a E16 Socket there extremely tight but do come undone with a little force. Axle completly off now just got to wait till new one arrives.... noone mentioned how difficult it is to undo the bloody brake pipes tho lol ended up snapping 2 !!!!! ah well more work on the project to be done lol
#12: Re: how to remove rear axle Author: liambez, Location: lincolnPosted: Tue Mar 08, 2011 9:43 am ---- As promised but a day early lol the Torx bolts underneither holding the axle on need a E16 Socket there extremely tight but do come undone with a little force. Axle completly off now just got to wait till new one arrives.... noone mentioned how difficult it is to undo the bloody brake pipes tho lol ended up snapping 2 !!!!! ah well more work on the project to be done lol
#13: Re: how to remove rear axle Author: scuba, Location: scotlandPosted: Tue Jan 17, 2012 7:46 pm ---- were are the four bolts located in the boot ?
#14: Re: how to remove rear axle Author: JonnyGTI, Location: AirdriePosted: Tue Jan 17, 2012 8:00 pm ---- the bolts are under the car not in the boot as i have not long done my axle but gonna need to take it off again to do the bushes
#15: Re: how to remove rear axle Author: scuba, Location: scotlandPosted: Tue Jan 17, 2012 8:07 pm ---- ok thank u i am going to take one off tomorrow and never done it before so just trying to find out the job that awaits for me lol
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [45]:
Visitors: 44
Members: 0
Staff Online Now:
Page Views:
General
