#1: Help required with Rusty Sills Author: liambez, Location: lincolnPosted: Fri Mar 11, 2011 8:01 pm ---- heres a pic of 1 of the 5 rust holes
any one have any idea where i could get hold of a pair of sills ?
or do you reckon just to get the 5 holes plated up ??
this is on a project car am trying to get back on the road so any advice is welcome or anyone near lincoln who could help me out with someone who can weld cheap. thanks
#2: Re: Help required with Rusty Sills Author: Seabook, Posted: Fri Mar 11, 2011 8:56 pm ---- you can always get new sill from dealer..
GBP90.67 per side
#3: Re: Help required with Rusty Sills Author: Edward, Location: In the garagePosted: Sat Mar 12, 2011 2:41 am ---- I never knew 206's rust like that! I hope that's an S reg and nothing newer.
#4: Re: Help required with Rusty Sills Author: Resolutionary, Location: South West LondonPosted: Sat Mar 12, 2011 3:20 am ---- What year is the car? You've got me conscious now! But yeah as above they're £100 or so each from the dealer.
#5: Re: Help required with Rusty Sills Author: MrBSI, Location: What's it to you? ? ?Posted: Sat Mar 12, 2011 3:29 am ----
Edward wrote:
I never knew 206's rust like that! I hope that's an S reg and nothing newer.
Thats gonna be poorly repaired accident damage
#6: Re: Help required with Rusty Sills Author: Andrew, Location: Black Country Ay IPosted: Sat Mar 12, 2011 3:59 am ---- Everytime you jack the car up it leaves a mark on the sill so I just rub it down and give it a spot of touch up paint and lacquer
Id like to know how old this car is, anything newer then it would make me nervous
#7: Re: Help required with Rusty Sills Author: NICKST, Location: Little hulton (worsley)Posted: Sat Mar 12, 2011 4:01 am ----
MrBSI wrote:
Edward wrote:
I never knew 206's rust like that! I hope that's an S reg and nothing newer.
Thats gonna be poorly repaired accident damage
That was my first thort.
#8: Re: Help required with Rusty Sills Author: MrBSI, Location: What's it to you? ? ?Posted: Sat Mar 12, 2011 4:03 am ---- Even though im very confident of Peugeot's rust proofing of the 206 I still gave mine the Dinitrol treatment
#9: Re: Help required with Rusty Sills Author: Andrew, Location: Black Country Ay IPosted: Sat Mar 12, 2011 6:01 am ---- Is that the same as waxoil?
#10: Re: Help required with Rusty Sills Author: MrBSI, Location: What's it to you? ? ?Posted: Sat Mar 12, 2011 6:04 am ----
Andrewxps wrote:
Is that the same as waxoil?
Better
Waxoil is advertised everywhere to sell, Dinitrol doesnt need to advertise
#11: Re: Help required with Rusty Sills Author: macca1411, Location: Westhoughton, LancashirePosted: Sat Mar 12, 2011 6:14 am ---- Just go to a local motor factors. Panels will be half the price of the dealers. The big cost will be in the fitting and finishing unless you can do it yourself.
#12: Re: Help required with Rusty Sills Author: MrBSI, Location: What's it to you? ? ?Posted: Sat Mar 12, 2011 6:16 am ----
macca1411 wrote:
Just go to a local motor factors. Panels will be half the price of the dealers. The big cost will be in the fitting and finishing unless you can do it yourself.
Unless you want the car to rot out again I would advise fit GENUINE Peugeot panels
#13: Re: Help required with Rusty Sills Author: rttam, Location: devonPosted: Sat Mar 12, 2011 11:52 am ----
Edward wrote:
I never knew 206's rust like that! I hope that's an S reg and nothing newer.
we've never seen a 206 with rust on the sill at work and we live buy the sea and in the country so cars round here get a bit of a battering :S would say that could be badly repaired accident damage in the past is it both sides or just one??
#14: Re: Help required with Rusty Sills Author: liambez, Location: lincolnPosted: Sat Mar 12, 2011 6:18 pm ---- Lol its a X plate car so 2000 reg and yeah i first thought accident damage but got details for previous owners and it hasnt been in any i just think the car has been badly treated Hense why its now a project car for me.
I didnt realise u can buy sills for the Normal 206 only thought you could get them for the 206cc ???
and its on both sills not just the one witch again doesnt indicate to been in a accident.
even tho i hate french cars i truley believe this one needs to be put back on the road and i may even keep it when repaired and get rid of my Vauxhall astra ! and thats saying something as i love my car lol.
Anyone know of any places to get sills from Around lincolnshire other than main dealers or should i say main stealers...... and know of any decent welder to attach the new sills. i may be good under the bonnet but when it comes to welding thats a true art form..
#15: Re: Help required with Rusty Sills Author: pug206lx, Location: Taking a gearbox off somewherePosted: Sat Mar 12, 2011 7:00 pm ---- I think we're gonna be seeing more of this as the cars get older. This is the first i've seen of it as well.
#16: Re: Help required with Rusty Sills Author: liambez, Location: lincolnPosted: Sat Mar 12, 2011 9:34 pm ---- seen a few recently as bad as this in the workshop seems to be around same place and very simlar in age too.... not looking good for the future lol
#17: Re: Help required with Rusty Sills Author: rttam, Location: devonPosted: Sun Mar 13, 2011 4:26 am ---- just something i remembered from a while back is it the nearside sill?......
had a 206 in at work with a 'sloshing' sound from the passenger side turns out the sill drain holes were gunked up and the sill was half full of water
#18: Re: Help required with Rusty Sills Author: MrBSI, Location: What's it to you? ? ?Posted: Sun Mar 13, 2011 5:15 am ----
rttam wrote:
just something i remembered from a while back is it the nearside sill?......
had a 206 in at work with a 'sloshing' sound from the passenger side turns out the sill drain holes were gunked up and the sill was half full of water
Thats pure bad maintance then
#19: Re: Help required with Rusty Sills Author: liambez, Location: lincolnPosted: Sun Mar 13, 2011 12:14 pm ---- Nah its both sills at the front jacking point and at the rear jacking points..... the more i work on the car the more problems that keep arising lol was only firing on 3 cylinders but now sorted that with some bosch super spark plugs but now after taking car 4 a quick test ( On a private road ) all i can hear is knocking from the Front driversside suspension on inspection found that the Drop link bar seals are abliterated so if i change the drop links HOPEFULLY the knocking will stop. So can u buy sills for the normal 206 or is it only the cc ? and any other thoughts on the Knocking other than drop link arm ?
#20: Re: Help required with Rusty Sills Author: MrBSI, Location: What's it to you? ? ?Posted: Sun Mar 13, 2011 12:17 pm ---- You can buy the sills from Peugeot for the hatchback 206's
#21: Re: Help required with Rusty Sills Author: liambez, Location: lincolnPosted: Sun Mar 13, 2011 12:29 pm ----
MrBSI wrote:
You can buy the sills from Peugeot for the hatchback 206's
is it only the main stealers that sell um or can i get parts from elsewhere ?
#22: Re: Help required with Rusty Sills Author: MrBSI, Location: What's it to you? ? ?Posted: Sun Mar 13, 2011 2:20 pm ----
liambez wrote:
MrBSI wrote:
You can buy the sills from Peugeot for the hatchback 206's
is it only the main stealers that sell um or can i get parts from elsewhere ?
You can get them from most places that supply body panels.
Main dealer ones will be genuine, resist rust much better in the future & will fit first time
#23: Re: Help required with Rusty Sills Author: liambez, Location: lincolnPosted: Sun Mar 13, 2011 3:17 pm ----
MrBSI wrote:
liambez wrote:
MrBSI wrote:
You can buy the sills from Peugeot for the hatchback 206's
is it only the main stealers that sell um or can i get parts from elsewhere ?
You can get them from most places that supply body panels.
Main dealer ones will be genuine, resist rust much better in the future & will fit first time
i presume its a case of cutting at the rear arch to remove the sill then ? and yeah suspose yor right but was gonna get the car body sealed after its had its blow over so would it really make a diff it was genuine or a copy ?
#24: Re: Help required with Rusty Sills Author: liambez, Location: lincolnPosted: Mon Mar 14, 2011 1:30 pm ---- well as advised i contact my local pug garage today to have a heart attack.. there quoting and saying that for Both sills it will be just over £600....... where has the £100 come from ?????
#25: Re: Help required with Rusty Sills Author: Seabook, Posted: Mon Mar 14, 2011 1:31 pm ----
liambez wrote:
well as advised i contact my local pug garage today to have a heart attack.. there quoting and saying that for Both sills it will be just over £600....... where has the £100 come from ?????
peugeot service box
can't be over 600.
#26: Re: Help required with Rusty Sills Author: liambez, Location: lincolnPosted: Mon Mar 14, 2011 1:40 pm ---- got a website or number ? i just contacted parts at pug and they Reckon for a pair there over 600 think it was around 620 + vat so ridiculous
#27: Re: Help required with Rusty Sills Author: Seabook, Posted: Mon Mar 14, 2011 2:23 pm ---- will get you the parts number later, still at work atm lol
#28: Re: Help required with Rusty Sills Author: Seabook, Posted: Mon Mar 14, 2011 3:58 pm ----
parts 1=7009 A3 + 7010 E9 = 319.75x2
parts 2=7007 W2 + 7008 Q6 = 126.14x2
parts 4=7007 R9 + 7008 L1 = 90.67x2
#29: Re: Help required with Rusty Sills Author: liambez, Location: lincolnPosted: Mon Mar 14, 2011 4:44 pm ---- that would be why.. if u look at the Picture of the rust its the 2 outta sills so its part 1 that i would need so they have got the pricing correct think ill get it patched up instead lol
#30: Re: Help required with Rusty Sills Author: vwaudi, Location: midlandsPosted: Thu May 05, 2011 12:52 pm ---- Just been looking at my sills and they are just as rotten
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [312]:
Visitors: 311
Members: 0
Staff Online Now:
Page Views:
General
