#1: Northantsben's xs project, BYE BYE PEUGEOT.... GONE Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Mar 20, 2011 8:43 am ---- pick up a car today, picked it up on a trailer and i am sooooo glad i did as bloke started fixing breaks but never finish (and there none )
so this is my new project, have many ideas but needs a gooooooooooooooooood tidy up and bits fixing 1st, is a right state but cant complain for price i paid.
anyway here it is you have been warned .....................
ben, Last edited by NorthantsBen on Thu Jan 03, 2013 4:10 pm; edited 27 times in total
#2: Re: Northantsben xs project, (pic heavy) Author: Mattie-RS, Location: A Track near you ;)Posted: Sun Mar 20, 2011 8:45 am ---- Brave boii
#3: Re: Northantsben xs project, (pic heavy) Author: tomd0801754, Location: MoscowPosted: Sun Mar 20, 2011 8:45 am ---- Bloody hell! have fun! Haha...
I am looking forward to seeing the progress!
#4: Re: Northantsben xs project, (pic heavy) Author: Liam-HuTcH, Location: PeterboroughPosted: Sun Mar 20, 2011 8:47 am ---- i take it the car used to be china blue?
#5: Re: Northantsben xs project, (pic heavy) Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Mar 20, 2011 8:49 am ----
Liam-HuTcH wrote:
i take it the car used to be china blue?
yup and under that white were it pealed off it is in perfect condition
just were bits have been filled in like the door locks etc wont be as good.
edit: just done a check and it registered as blue too Last edited by NorthantsBen on Sun Mar 20, 2011 8:52 am; edited 1 time in total
#6: Re: Northantsben xs project, (pic heavy) Author: DJ-, Location: UKPosted: Sun Mar 20, 2011 8:51 am ---- Yikes some abuse been done there!! lol.
Hope you can sort it out!
#7: Re: Northantsben xs project, (pic heavy) Author: mattievrs, Location: LeicesterPosted: Sun Mar 20, 2011 8:51 am ---- What the mileage like on it?
Looks like a good base for a project aswell!
#8: Re: Northantsben xs project, (pic heavy) Author: Liam-HuTcH, Location: PeterboroughPosted: Sun Mar 20, 2011 8:52 am ---- hope your keeping it white though ben. Would be better to see it that colour. Might have to take trip to raunds at sometime to check it out.
#9: Re: Northantsben xs project, (pic heavy) Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Mar 20, 2011 8:55 am ----
DJ- wrote:
Yikes some abuse been done there!! lol.
Hope you can sort it out!
your fault
yup everythings been on it when sprayed white too
and the airbag casses are there but there both empty
mattievrs wrote:
What the mileage like on it?
Looks like a good base for a project aswell!
well the clock reads 35000ish but cant be right,
yer the body work looks naff but i want to change that anyway so thats not a problem, bit of knocking when moving but thats nothing major.
Liam-HuTcH wrote:
hope your keeping it white though ben. Would be better to see it that colour. Might have to take trip to raunds at sometime to check it out.
can do but i would wait for a while yet, unless you bring a sick bag
#10: Re: Northantsben xs project, (pic heavy) Author: Liam-HuTcH, Location: PeterboroughPosted: Sun Mar 20, 2011 8:57 am ---- i'll wait few weeks first mate as would be good to see it before you do too much to it quickly lol.
#11: Re: Northantsben xs project, (pic heavy) Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Mar 20, 2011 9:06 am ---- bleave it or not, the bloke put in thorough an mot like that (failed of course)
#12: Re: Northantsben xs project, (pic heavy) Author: Ste, Location: Hull -or- The World Of Info CodePosted: Sun Mar 20, 2011 9:06 am ---- Missing the 206 too much then Ben
#13: Re: Northantsben xs project, (pic heavy) Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Mar 20, 2011 9:08 am ----
Ste206 wrote:
Missing the 206 too much then Ben
i wanted a project was thinking a few cars, one being a 206, then DJ spotted this (car only few towns up road from me) so made him a stupid offer and he accepted,
#14: Re: Northantsben xs project, (pic heavy) Author: Liam-HuTcH, Location: PeterboroughPosted: Sun Mar 20, 2011 9:10 am ---- why would you put that through a mot lmao. Hope it was extreamly cheap.
#15: Re: Northantsben xs project, (pic heavy) Author: Harry, Location: StaffordPosted: Sun Mar 20, 2011 9:24 am ---- How much did you pay for it? Certainly what I would call a project
#16: Re: Northantsben xs project, (pic heavy) Author: pug206lx, Location: Taking a gearbox off somewherePosted: Sun Mar 20, 2011 10:28 am ---- That paint job is shocking
I'd guess that you paid about £100-£180
#17: Re: Northantsben xs project, (pic heavy) Author: Jordan_xsi, Location: IpswichPosted: Sun Mar 20, 2011 10:31 am ---- Best of luck mate youve got your work cut out by the looks of it!
#18: Re: Northantsben xs project, (pic heavy) Author: Abzynthe, Posted: Sun Mar 20, 2011 10:44 am ---- WOW! lol
Good luck with it
#19: Re: Northantsben xs project, (pic heavy) Author: JordGJ, Location: Leeds / West MidlandsPosted: Sun Mar 20, 2011 11:06 am ---- I certainly hope it was cheap!
A shame its a respray and not an original white one i thought it was when i saw it on facebook
look forward to seeing the progress though
#20: Re: Northantsben xs project, (pic heavy) Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Mar 20, 2011 11:29 am ----
pug206lx wrote:
That paint job is shocking
I'd guess that you paid about £100-£180
yer £200ish, looks worse than it is i think, needs body work but i was planning on what ever car i brought anyway so not a problem,
car came with all the fittings and fixings missing in pics too, and new brakes (only half been fitted)
just a few minor things to fix to be road legal too but not that bad,
#21: Re: Northantsben xs project, (pic heavy) Author: Jay794, Location: Sheffield/Chesterfield/DronfieldPosted: Sun Mar 20, 2011 11:38 am ---- Needs a wee bit of work, and it's the rear numberplate illegal? should look good when its up to scratch though
#22: Re: Northantsben xs project, (pic heavy) Author: namgaj, Location: Chasing Ash, Addaz and Lee........... hopefully catching Addaz and havin fun :PPosted: Sun Mar 20, 2011 11:38 am ---- That'll keep you busy for a while haha!!
#23: Re: Northantsben xs project, (pic heavy) Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Mar 20, 2011 11:46 am ----
Jay794 wrote:
Needs a wee bit of work, and it's the rear numberplate illegal? should look good when its up to scratch though
no its not, not lite up in anyway.
#24: Re: Northantsben xs project, (pic heavy) Author: Teebag, Location: exhall, bedworth, coventryPosted: Sun Mar 20, 2011 2:16 pm ---- yey! looks like we got ourselves a nice project bennyboy!
i have airbags if they're of any use to you?
#25: Re: Northantsben xs project, (pic heavy) Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Mar 20, 2011 2:27 pm ----
Teebag wrote:
yey! looks like we got ourselves a nice project bennyboy!
i have airbags if they're of any use to you?
F the passengers nice space to mould somthing into the space
might need drivers one tho, thought there was broken cable but that was for horn, going to take it off when i have five mins have a look at the connections.
#26: Re: Northantsben xs project, (pic heavy) Author: Teebag, Location: exhall, bedworth, coventryPosted: Sun Mar 20, 2011 2:40 pm ---- from looking at the pics your gunna need about 10ltrs of panel wipe and loads of paper roll to clean all that white aerosol off before atarting with any bodywork..... get it road legal 1st lol..... just thought, got gti calipers aswell if any good to you?
#27: Re: Northantsben xs project, (pic heavy) Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Mar 20, 2011 3:29 pm ----
Teebag wrote:
from looking at the pics your gunna need about 10ltrs of panel wipe and loads of paper roll to clean all that white aerosol off before atarting with any bodywork..... get it road legal 1st lol..... just thought, got gti calipers aswell if any good to you?
yer the plan is to get that paint off, get it running and to the point were its ready for an mot (maybe mot it depending how flush i feel) then body work
#28: Re: Northantsben xs project, (pic heavy) Author: Danny., Location: PeterboroughPosted: Sun Mar 20, 2011 6:18 pm ---- Hmmm good luck mate
Will pop up with hutch and see it lol :L
#29: Re: Northantsben's xs project, (pic heavy) Author: Antknee, Location: ManchesterPosted: Sun Mar 20, 2011 6:58 pm ---- looking forward to this one dont skimp on the pics has it been sprayed with the lights in?! lol
#30: Re: Northantsben xs project, (pic heavy) Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Mon Mar 21, 2011 3:24 am ----
Danny. wrote:
Hmmm good luck mate
Will pop up with hutch and see it lol :L
Thanks
It's nothing to look at tbh, just a right shagged 206 ATM, plan is to get it ready to pass an mot and get that White paint off, see how the smoothed bits have been done,
#31: Re: Northantsben's xs project, (pic heavy) Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Mon Mar 21, 2011 3:25 am ----
Antknee wrote:
looking forward to this one dont skimp on the pics has it been sprayed with the lights in?! lol
Everything has been left in when sprayed, I mean everything,
The centre clock has white spray on it even lol
#32: Re: Northantsben xs project, (pic heavy) Author: Danny., Location: PeterboroughPosted: Mon Mar 21, 2011 3:46 am ----
NorthantsBen wrote:
Danny. wrote:
Hmmm good luck mate
Will pop up with hutch and see it lol :L
Thanks
It's nothing to look at tbh, just a right shagged 206 ATM, plan is to get it ready to pass an mot and get that White paint off, see how the smoothed bits have been done,
have you got the failed notice from when he had it MOT'ed? Or did tehy just look and go ... f off. lol
#33: Re: Northantsben's xs project, (pic heavy) Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Mon Mar 21, 2011 3:52 am ---- He has a failed sheet he is posting to me, car was stored at his mums house, sheet was at his.
Brakes and wish bones were on sheet I know, he started doing breaks but not finished them, I will take them apart have a look when I get 5 mins.
#34: Re: Northantsben's xs project, (pic heavy) Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Mon Mar 21, 2011 3:53 pm ---- had a quick go with some car paint thinner when i got in today came off dead easy.........
a lot thicker on roof....
on the piller there are a few marks but other than that so far paintwork under has hardly been touched.
will have to see whats covered under the rest as i get to it
#35: Re: Northantsben's xs project, (pic heavy) Author: tomd0801754, Location: MoscowPosted: Mon Mar 21, 2011 4:02 pm ---- Can whoever painted they car come do mine? Professional job like!
#36: Re: Northantsben's xs project, (pic heavy) Author: Harry, Location: StaffordPosted: Mon Mar 21, 2011 4:03 pm ---- Did you say you are doing a respray anyway? Can't believe it has been painted so shitly didn't think anyone was that stupid.
Did you say you are doing a respray anyway? Can't believe it has been painted so shitly didn't think anyone was that stupid.
hopfully thats the plan yes, this white paint is so flakey so taking it off to get down to good base.
can see if anything is hidden under that white paint too.
#39: Re: Northantsben's xs project, (pic heavy) Author: DJ-, Location: UKPosted: Mon Mar 21, 2011 4:10 pm ---- youre brave taking something like this on. I really feel sorry for you now and maybe i should have kept my mouth shut?! lol
Did you say you are doing a respray anyway? Can't believe it has been painted so shitly didn't think anyone was that stupid.
hopfully thats the plan yes, this white paint is so flakey so taking it off to get down to good base.
can see if anything is hidden under that white paint too.
You will probably have to I doubt you could get the blue looking nice if it's had that s**t all over it.
Out of interest how is the thinners getting the white off, and not the blue?
Respect you for this challenge as well, I thought you meant sport bumpers and SP crap project
#42: Re: Northantsben's xs project, (pic heavy) Author: DJ-, Location: UKPosted: Mon Mar 21, 2011 4:22 pm ---- haha!
Yeh fair enough, I hope the rest goes ok! Will keep an eye on this thread for sure
Did you say you are doing a respray anyway? Can't believe it has been painted so shitly didn't think anyone was that stupid.
hopfully thats the plan yes, this white paint is so flakey so taking it off to get down to good base.
can see if anything is hidden under that white paint too.
You will probably have to I doubt you could get the blue looking nice if it's had that s**t all over it.
Out of interest how is the thinners getting the white off, and not the blue?
Respect you for this challenge as well, I thought you meant sport bumpers and SP crap project
well the smooth door locks, smoothed aerial will have filler around them so paint will be naff round them i would think, dunno,
i dunno the white comes off so easy with the thinner on, no effort once it gets going. then i just wash it down to get all the residue off.
next door has some in his garage so we tried it.
Ah fair enough, looks rough as hell. Who would even attempt to do that with such little knowledge
#45: Re: Northantsben's xs project, (pic heavy) Author: tomd0801754, Location: MoscowPosted: Mon Mar 21, 2011 4:33 pm ---- The laquer will be protecting the paint... I think
Did you say you are doing a respray anyway? Can't believe it has been painted so shitly didn't think anyone was that stupid.
hopfully thats the plan yes, this white paint is so flakey so taking it off to get down to good base.
can see if anything is hidden under that white paint too.
You will probably have to I doubt you could get the blue looking nice if it's had that s**t all over it.
Out of interest how is the thinners getting the white off, and not the blue?
Respect you for this challenge as well, I thought you meant sport bumpers and SP crap project
well the smooth door locks, smoothed aerial will have filler around them so paint will be naff round them i would think, dunno,
i dunno the white comes off so easy with the thinner on, no effort once it gets going. then i just wash it down to get all the residue off.
next door has some in his garage so we tried it.
Ah fair enough, looks rough as hell. Who would even attempt to do that with such little knowledge
im a bit iffy with paint work / body work etc will have help,
but the maniacal side im ok with that so far
Not you mate I know you will do a good job talking about the person who did it before, I've seen better at the scrappy Last edited by Harry on Mon Mar 21, 2011 5:53 pm; edited 1 time in total
#48: Re: Northantsben's xs project, (pic heavy) Author: Teebag, Location: exhall, bedworth, coventryPosted: Mon Mar 21, 2011 5:08 pm ---- will all be good! we know it will need a full respray wso doesnt really matter what the thinners will do to the china blue underneath so long as it leaves a solid area to prime over.....
will all be good! we know it will need a full respray wso doesnt really matter what the thinners will do to the china blue underneath so long as it leaves a solid area to prime over.....
it has had the rear archs curled up like we did to yours matt,
got to sort these brakes too rolled off drive earlyer as i forgot they didnt work
#50: Re: Northantsben's xs project, (pic heavy) Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Wed Mar 23, 2011 3:04 pm ---- slowly but surely its coming off.........
the bit on front were aerial should be is filler where its been filled.
#51: Re: Northantsben's xs project, (pic heavy) Author: Teebag, Location: exhall, bedworth, coventryPosted: Wed Mar 23, 2011 3:13 pm ---- wow! rear arches being rolled up isnt a problem ben. need to check whats under the filler considering how shoddy the paint has been put on.... the china blue is looking good tho..... careful using thinners on the plastics as it can melt them.
wow! rear arches being rolled up isnt a problem ben. need to check whats under the filler considering how shoddy the paint has been put on.... the china blue is looking good tho..... careful using thinners on the plastics as it can melt them.
true have been thinking about the filler, will get the rest of the car done then investigate, see if any other filler is covered up.
yer the thinner melted the gloves i was wearing
#53: Re: Northantsben's xs project, (pic heavy) Author: Teebag, Location: exhall, bedworth, coventryPosted: Wed Mar 23, 2011 3:21 pm ---- unfortunatly givent the state the rest of the car is in i wouldnt trust the filler work.... i expect you'll find filler behind the interior light where the hole is.....
unfortunatly givent the state the rest of the car is in i wouldnt trust the filler work.... i expect you'll find filler behind the interior light where the hole is.....
matt
true door locks have just filler in them, and boot has expanding foam.
#55: Re: Northantsben's xs project, (pic heavy) Author: Teebag, Location: exhall, bedworth, coventryPosted: Wed Mar 23, 2011 3:27 pm ---- boots a fibreglass panel then...... expanding foam to fill the void is ok. door locks idealy want welding up. ariel hole wants welding up. perfect world the boot wants welding smooth aswell.... all can be done using fibreglass and filler, but just filler is a no no.
#56: Re: Northantsben's xs project, (pic heavy) Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Wed Mar 23, 2011 4:08 pm ---- yer could be and probably is i will strip boot tomoro see what it is,
welding for all the stuff i have planned anyway, best way imo,
#57: Re: Northantsben's xs project, (pic heavy) Author: pug206lx, Location: Taking a gearbox off somewherePosted: Wed Mar 23, 2011 4:57 pm ---- The china looks good under there, better than that white rubbish.
Nice
#58: Re: Northantsben's xs project, **PG4 latest update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Wed Mar 23, 2011 5:06 pm ---- thats what happens if you dont do the job right
What could I use to just remove lacquer? Or blend new lacquer in?
probably sand it off Jared I'm unsure, pm Matt (teebag) he will know I'm sure.
Come practice on mine and get some of this white off lol
#61: Re: Northantsben's xs project, **PG4 latest update** Author: PugJH, Location: NorthantsPosted: Thu Mar 24, 2011 5:14 am ---- let us know if you need any parts, i got loads of crap left over lol.....
as for taking paint off, its not the nicest of jobs, takes ages, you found any multicoloured panels underneath, ie a green door or red bonnet ha
#62: Re: Northantsben's xs project, **PG4 latest update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Thu Mar 24, 2011 5:23 am ---- Not yet, apart from silver spoiler,
Little bit of filler.
#63: Re: Northantsben's xs project, **PG4 latest update** Author: Danw_VVT, Location: Herts/LondonPosted: Thu Mar 24, 2011 9:05 am ---- ben mate you not thought of just using a sander to blitz the white of if your gonna get it resprayed at some point?
i bet somethin like a 500 grit would be perfect to take the white off without going deep into the China lacquer?
#64: Re: Northantsben's xs project, **PG4 latest update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Thu Mar 24, 2011 1:57 pm ---- Well all I'm doing ATM the min is lay a cloth on car and pour thinner on cloth (holds it self to side of car etc)
Leave it 5mins, take off cloth and it's all bubbled up.
Then just remove it with credit card type card.
So very easy ATM requires no effort the tough bits I will sand.
+ this methord there is not White dust flying everwere all over next doors car lol
#65: Re: Northantsben's xs project, **PG5 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sat Mar 26, 2011 11:52 am ---- got brakes sorted so its safe to move around (as it had none at all) the rear was bad, the hub nut was cross threaded grrrr (32mm btw ) and also couldnt get the hub off to save my life so just hit the stub axle out to get hub off,
bearing also naff on that side but planning on disc conversion anyway. (bloke had done other sides brakes) main thing is now it dont roll off drive or i have to use the reverse and 1st to brake when moving it around
also removed a bit more paint
#66: Re: Northantsben's xs project, **PG4 latest update** Author: spike_202, Location: West midsPosted: Sat Mar 26, 2011 11:58 am ---- WTF looks like it was done with tipX lol fair play ben this should be good fun to do and nice to see your back in a pug
#67: Re: Northantsben's xs project, **PG5 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sat Mar 26, 2011 12:05 pm ---- it does look like it tbh, not shiny or anything
just the bottom half has been primerd (not keyed just primer) they must have run out when they did the top bit
#68: Re: Northantsben's xs project, **PG5 last update** Author: spike_202, Location: West midsPosted: Sat Mar 26, 2011 3:10 pm ---- Lol no way waiting to see what you do to this one as I loved the dash in your last one and all the little trick bits
#69: Re: Northantsben's xs project, **PG5 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sat Mar 26, 2011 4:39 pm ---- well i have quite a few plans as not rushing it to get it done etc,
+ now i have work van i dont have to worry about getting to work mondays etc when doing work on weekends (if somthing goes wrong)
#70: Re: Northantsben's xs project, **PG5 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Mar 27, 2011 11:05 am ---- Started 1st of many many many mods today, note this is STARTED not finished, got the back and sides of holder to make and put on, numberplate been held in temp to see what it looks like.......
bit more paint removed too....
thanks god im going to replace the front wings and bonnet
thanks for looking Last edited by NorthantsBen on Sun Mar 27, 2011 11:28 am; edited 1 time in total
#71: Re: Northantsben's xs project, **PG5 last update** Author: smorgan7, Location: South WalesPosted: Sun Mar 27, 2011 11:26 am ---- The rear bumper looks sweet. Any chance of you doing a how to of it please
#72: Re: Northantsben's xs project, **PG5 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Mar 27, 2011 1:33 pm ----
smorgan7 wrote:
The rear bumper looks sweet. Any chance of you doing a how to of it please
thanks,
i might do but its quite simple tbh,
#73: Re: Northantsben's xs project, **PG5 last update** Author: Mike_XS, Location: SouthamptonPosted: Sun Mar 27, 2011 2:42 pm ---- Is that a Fiat Bravo in the background?
Numberplate positioning looks sweet!
#74: Re: Northantsben's xs project, **PG5 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Mar 27, 2011 3:14 pm ---- thanks
no its a fiat bravA lol
#75: Re: Northantsben's xs project, **PG5 last update** Author: Mike_XS, Location: SouthamptonPosted: Sun Mar 27, 2011 3:32 pm ---- Ah right...exactly the same front end lol...I had a Bravo in the same colour
#76: Re: Northantsben's xs project, **PG5 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Mon Mar 28, 2011 1:04 am ---- Yer they have same front end
#77: Re: Northantsben's xs project, **PG5 last update** Author: Kersh, Location: Bridgnorth, Nr WolverhamptonPosted: Mon Mar 28, 2011 2:46 am ---- now this is a real project! im still amazed that someone let their car get into this condition!
#78: Re: Northantsben's xs project, **PG5 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Mon Mar 28, 2011 2:15 pm ---- People do for some reason
Few things been bodged on it, there on my fix list, luckly there not expensive fixes so far *touch wood* and easy too.
#79: Re: Northantsben's xs project, **PG5 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Wed Mar 30, 2011 4:13 pm ----
Kersh wrote:
now this is a real project! im still amazed that someone let their car get into this condition!
I just has the full fail sheet for it now and it's long
Nothing too bad but if someone just took care it wouldng be half as long
#80: Re: Northantsben's xs project, **PG5 last update** Author: Danny., Location: PeterboroughPosted: Thu Mar 31, 2011 8:35 am ---- Looking good mate
Cant waqit to see it finished
#81: Re: Northantsben's xs project, **PG5 last update** Author: Danw_VVT, Location: Herts/LondonPosted: Thu Mar 31, 2011 8:42 am ---- so whats the fails?
what you doing about rear fog ben? just gonna put a jap style one on for mot's?
#82: Re: Northantsben's xs project, **PG5 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Thu Mar 31, 2011 12:18 pm ----
Danw_VVT wrote:
so whats the fails?
what you doing about rear fog ben? just gonna put a jap style one on for mot's?
as for the rear fog, i dunno yet, if i keep the rear lights (thinking of smoothing them in or somthing similar) i will just change one of the reverse lights into a fog bulb and rewire them. (fog on the correct side of course )
still getting ideas atm, have a basic idea what im doing, working on removin that naff white see whats under it, and getting underneath close to road legal.
#83: Re: Northantsben's xs project, **PG5 last update** Author: PugJH, Location: NorthantsPosted: Thu Mar 31, 2011 12:31 pm ----
NorthantsBen wrote:
as for the rear fog, i dunno yet, if i keep the rear lights (thinking of smoothing them in or somthing similar) i will just change one of the reverse lights into a fog bulb and rewire them. (fog on the correct side of course )
As in something like this? *obviously for a 206*
#84: Re: Northantsben's xs project, **PG5 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Thu Mar 31, 2011 12:51 pm ---- maybe, just somthing to think about, maybe somthing like this for rear lights i dunno.
or
#85: Re: Northantsben's xs project, **PG5 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Apr 03, 2011 10:39 am ---- little bit more done today, not done bottom of holder yet, the exhaust is not on the brackets thats just hanging there,i have a standard saxo exhaust to go on (lot shorter than a 206 one).....
#86: Re: Northantsben's xs project, **PG6 last update** Author: craigdmjv, Location: WiltshirePosted: Sun Apr 03, 2011 2:57 pm ---- you should smooth the rear lights and put lights on the pillars in the boot facing out of the window ill try and get a picture
#87: Re: Northantsben's xs project, **PG6 last update** Author: Ali_H, Location: Chichester, SussexPosted: Sun Apr 03, 2011 4:48 pm ---- LOL possible the most bodged car i've ever seen.
#88: Re: Northantsben's xs project, **PG6 last update** Author: craigdmjv, Location: WiltshirePosted: Sun Apr 03, 2011 11:48 pm ---- just a quick mess around
#89: Re: Northantsben's xs project, **PG6 last update** Author: Jay794, Location: Sheffield/Chesterfield/DronfieldPosted: Mon Apr 04, 2011 2:09 am ---- Should look nice when it's done, but I hate that exhaust placement, I hope the saxo one is a lot smaller. The exhaust you've got on at the moment is just waiting for a speedbump to come along and put a huge dent in the backbox
#90: Re: Northantsben's xs project, **PG6 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Mon Apr 04, 2011 4:47 am ----
Jay794 wrote:
Should look nice when it's done, but I hate that exhaust placement, I hope the saxo one is a lot smaller. The exhaust you've got on at the moment is just waiting for a speedbump to come along and put a huge dent in the backbox
The exhaust is purly there ATM to stop noise while moving car around drive etc. it's not on brackets it's just hanging there lol. will be fitting a standard saxo exhaust as its shorter so will be hidden under car and not be seen.
#91: Re: Northantsben's xs project, **PG6 last update** Author: Danw_VVT, Location: Herts/LondonPosted: Mon Apr 04, 2011 4:56 am ---- coming along nicely ben mate.
i think the grey example could be the best. i saw a civic somewhere that put the lights into the rear c pillar trims so the could be seen out the rear window.
#92: Re: Northantsben's xs project, **PG6 last update** Author: craigdmjv, Location: WiltshirePosted: Mon Apr 04, 2011 12:53 pm ---- i think you should properly smooth it e.g. side and bumper strips, handles, rear lights, tint the front lights, put the indicators in the mirrors and paint it matt black with euro chrome wheels and lower it
i think you should properly smooth it e.g. side and bumper strips, handles, rear lights, tint the front lights, put the indicators in the mirrors and paint it matt black with euro chrome wheels and lower it
tbh that is the roundabout plan, just need to find a welder as car off road they need to come here lol
still thinking about rear lights, like the photo shop idea
#94: Re: Northantsben's xs project, **PG6 last update** Author: craigdmjv, Location: WiltshirePosted: Mon Apr 04, 2011 1:15 pm ---- would be different from lexus lights and morettes etc...
i got some saxo vtr alloys for sale, in black, 3 tyres need swapping *but yes i have the 3 tyres* only want £120 for them
well just a saxo exhaust luke next door has one from that yellow saxo he had, so its just easy to hand atm.
#97: Re: Northantsben's xs project, **PG6 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sat Apr 09, 2011 9:18 am ---- speedo surround and inside was this red...
so painted it up black today while i waited for other bit to dry etc... from this.....
during....
done (for now)....
also got bit more paint removed today......
and one wicked bodged smooth boot removed nearly ready to be done the correct way ........
#98: Re: Northantsben's xs project, **PG7 last update** Author: PugJH, Location: NorthantsPosted: Sat Apr 09, 2011 9:47 am ---- HAHA love the block of filler, let me know if you need a new tailgate? i got one spare
can do it cheap for ya, its gold but ya car is gettin sprayed anyway.
#99: Re: Northantsben's xs project, **PG7 last update** Author: craigdmjv, Location: WiltshirePosted: Sat Apr 09, 2011 2:42 pm ---- have they cut the gear stick too ?
#100: Re: Northantsben's xs project, **PG7 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Apr 10, 2011 10:42 am ----
PugJH wrote:
HAHA love the block of filler, let me know if you need a new tailgate? i got one spare
can do it cheap for ya, its gold but ya car is gettin sprayed anyway.
its not in bad nick tbh, going to weld new panel on and smooth anyway,
i just need new bonnet and wings body panel wise,
#101: Re: Northantsben's xs project, **PG7 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Apr 10, 2011 10:43 am ----
craigdmjv wrote:
have they cut the gear stick too ?
yes it has been chopped,
#102: Re: Northantsben's xs project, **PG7 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Apr 10, 2011 10:45 am ---- exhaust fitted, just needs a bracket changing on box (sits too far round) looks low on pic but its tucked up out the way....
#103: Re: Northantsben's xs project, **PG7 last update** Author: wa8paint, Location: liverpoolPosted: Sun Apr 10, 2011 11:00 am ---- hahaha was that tailgate full of expanding foam and filler? did you buy it already done or get a bodyshop to do it?
#104: Re: Northantsben's xs project, **PG7 last update** Author: wa8paint, Location: liverpoolPosted: Sun Apr 10, 2011 11:03 am ---- sorry, my bad, just read the thread and you bought the car with it already done
#105: Re: Northantsben's xs project, **PG7 last update** Author: PugJH, Location: NorthantsPosted: Sun Apr 10, 2011 11:38 pm ---- New bonnet you say ah lol.
might have one of them aswel
#106: Re: Northantsben's xs project, **PG7 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Mon Apr 11, 2011 1:25 am ----
wa8paint wrote:
sorry, my bad, just read the thread and you bought the car with it already done
Lol yer, few body thing bodged on it lol
#107: Re: Northantsben's xs project, **PG7 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Mon Apr 11, 2011 1:27 am ----
PugJH wrote:
New bonnet you say ah lol.
might have one of them aswel
The one i have now has a crease in the middle
Drop me a text if it's cheap
#108: Re: Northantsben's xs project, **PG7 last update** Author: davek, Location: SouthamptonPosted: Mon Apr 11, 2011 6:05 am ---- Proper project this, good luck Ben! Can't beleive the expanded foam reg plate fill in - gash!
#109: Re: Northantsben's xs project, **PG7 last update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Apr 17, 2011 1:19 pm ---- couldnt be assed with any bodywork / paint/filler removing today, so got me hand greasy and started getting the engine out, all ready to come out now (all but the two main mounts)
#110: Re: Northantsben's xs project, **PG8 last update** Author: vanman_foci, Location: Barry, South WalesPosted: Mon Apr 18, 2011 1:35 pm ---- it reminds me of my project lol
#111: Re: Northantsben's xs project, **PG8 last update** Author: Harry, Location: StaffordPosted: Mon Apr 18, 2011 3:43 pm ---- Certainly getting on mate, how long you think till it's all done?
Certainly getting on mate, how long you think till it's all done?
Thanks, to be complete before fcs next year is my plan, saving for holiday ATM so money going to that ATM, still lots to do that don't cost money left tho lol
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17132
Online Now [60]:
Visitors: 59
Members: 0
Staff Online Now:
Page Views:
General
) 
.....................
has it been sprayed with the lights in?! lol
Can whoever painted they car come do mine? 
