Did you say you are doing a respray anyway? Can't believe it has been painted so shitly didn't think anyone was that stupid.
hopfully thats the plan yes, this white paint is so flakey so taking it off to get down to good base.
can see if anything is hidden under that white paint too.
You will probably have to I doubt you could get the blue looking nice if it's had that s**t all over it.
Out of interest how is the thinners getting the white off, and not the blue?
Respect you for this challenge as well, I thought you meant sport bumpers and SP crap project
well the smooth door locks, smoothed aerial will have filler around them so paint will be naff round them i would think, dunno,
i dunno the white comes off so easy with the thinner on, no effort once it gets going. then i just wash it down to get all the residue off.
next door has some in his garage so we tried it.
Ah fair enough, looks rough as hell. Who would even attempt to do that with such little knowledge
im a bit iffy with paint work / body work etc will have help,
but the maniacal side im ok with that so far
Not you mate I know you will do a good job talking about the person who did it before, I've seen better at the scrappy Last edited by Harry on Mon Mar 21, 2011 5:53 pm; edited 1 time in total
#48: Re: Northantsben's xs project, (pic heavy) Author: Teebag, Location: exhall, bedworth, coventryPosted: Mon Mar 21, 2011 5:08 pm ---- will all be good! we know it will need a full respray wso doesnt really matter what the thinners will do to the china blue underneath so long as it leaves a solid area to prime over.....
will all be good! we know it will need a full respray wso doesnt really matter what the thinners will do to the china blue underneath so long as it leaves a solid area to prime over.....
it has had the rear archs curled up like we did to yours matt,
got to sort these brakes too rolled off drive earlyer as i forgot they didnt work
#50: Re: Northantsben's xs project, (pic heavy) Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Wed Mar 23, 2011 3:04 pm ---- slowly but surely its coming off.........
the bit on front were aerial should be is filler where its been filled.
#51: Re: Northantsben's xs project, (pic heavy) Author: Teebag, Location: exhall, bedworth, coventryPosted: Wed Mar 23, 2011 3:13 pm ---- wow! rear arches being rolled up isnt a problem ben. need to check whats under the filler considering how shoddy the paint has been put on.... the china blue is looking good tho..... careful using thinners on the plastics as it can melt them.
wow! rear arches being rolled up isnt a problem ben. need to check whats under the filler considering how shoddy the paint has been put on.... the china blue is looking good tho..... careful using thinners on the plastics as it can melt them.
true have been thinking about the filler, will get the rest of the car done then investigate, see if any other filler is covered up.
yer the thinner melted the gloves i was wearing
#53: Re: Northantsben's xs project, (pic heavy) Author: Teebag, Location: exhall, bedworth, coventryPosted: Wed Mar 23, 2011 3:21 pm ---- unfortunatly givent the state the rest of the car is in i wouldnt trust the filler work.... i expect you'll find filler behind the interior light where the hole is.....
unfortunatly givent the state the rest of the car is in i wouldnt trust the filler work.... i expect you'll find filler behind the interior light where the hole is.....
matt
true door locks have just filler in them, and boot has expanding foam.
#55: Re: Northantsben's xs project, (pic heavy) Author: Teebag, Location: exhall, bedworth, coventryPosted: Wed Mar 23, 2011 3:27 pm ---- boots a fibreglass panel then...... expanding foam to fill the void is ok. door locks idealy want welding up. ariel hole wants welding up. perfect world the boot wants welding smooth aswell.... all can be done using fibreglass and filler, but just filler is a no no.
#56: Re: Northantsben's xs project, (pic heavy) Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Wed Mar 23, 2011 4:08 pm ---- yer could be and probably is i will strip boot tomoro see what it is,
welding for all the stuff i have planned anyway, best way imo,
#57: Re: Northantsben's xs project, (pic heavy) Author: pug206lx, Location: Taking a gearbox off somewherePosted: Wed Mar 23, 2011 4:57 pm ---- The china looks good under there, better than that white rubbish.
Nice
#58: Re: Northantsben's xs project, **PG4 latest update** Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Wed Mar 23, 2011 5:06 pm ---- thats what happens if you dont do the job right
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [238]:
Visitors: 237
Members: 0
Staff Online Now:
Page Views:
General
