#16: Re: 1.6l 16v - Anyone got one?? Author: Big_Rich180, Posted: Tue Mar 22, 2011 8:12 am ----
Uz wrote:
Golfguy206 wrote:
XSIcheeseman wrote:
well a cheap mod is 106 GTi cams lol im getting 106 GTi rallye cams and valve springs and retainers . ask lewis his 1.6 16v is realllly nice
hmm, thats a good one. do they have the same setup as the 1.6 16v XSi then??
A 106 Rallye is 8v so how the hell are you meant to use a single cam or a dohc engine..?
You can't use J4 cams, retainers, valve springs in a JP4 as you'll f*** the engine as a JP4 bottom end is like butter.
People fit a JP4 head on a J4 bottom end because the J4 bottom is alot stronger and then fit all the J4 internals.
#17: Re: 1.6l 16v - Anyone got one?? Author: Lewis1304, Location: NuneatonPosted: Tue Mar 22, 2011 8:13 am ---- Buy Kent or Newman Cams.
Lewis
#18: Re: 1.6l 16v - Anyone got one?? Author: XSIcheeseman, Location: OrpingtonPosted: Tue Mar 22, 2011 8:14 am ----
Big_Rich180 wrote:
Uz wrote:
Golfguy206 wrote:
XSIcheeseman wrote:
well a cheap mod is 106 GTi cams lol im getting 106 GTi rallye cams and valve springs and retainers . ask lewis his 1.6 16v is realllly nice
hmm, thats a good one. do they have the same setup as the 1.6 16v XSi then??
A 106 Rallye is 8v so how the hell are you meant to use a single cam or a dohc engine..?
You can't use J4 cams, retainers, valve springs in a JP4 as you'll f*** the engine as a JP4 bottom end is like butter.
People fit a JP4 head on a J4 bottom end because the J4 bottom is alot stronger and then fit all the J4 internals.
well whatever the engine the cams im getting are from a 16v 106 gti end off
#19: Re: 1.6l 16v - Anyone got one?? Author: XSIcheeseman, Location: OrpingtonPosted: Tue Mar 22, 2011 8:20 am ---- i wont bother so no1 needs to write back to my comments
#20: Re: 1.6l 16v - Anyone got one?? Author: Golfguy206, Location: PeterboroughPosted: Tue Mar 22, 2011 9:21 am ---- if its a credible mod then im interested. may need a little more investigation before anyone commits to the swap.
Anyone else done any other good simple mods that make a difference??
#21: Re: 1.6l 16v - Anyone got one?? Author: Lee, Location: EnglandPosted: Tue Mar 22, 2011 11:05 am ---- How about removing weight and bettering handling?
#22: Re: 1.6l 16v - Anyone got one?? Author: -Dave-, Location: North ManchesterPosted: Tue Mar 22, 2011 11:30 am ---- I have one, Wish it had a different gearbox though, Bloody hate it, Clunk clunk clunk anddddddddddd yes it's changed gear. Going to get uprated linkage's and a quickshift this weekend and see if that improve's it.
#23: Re: 1.6l 16v - Anyone got one?? Author: Addaz, Location: SuffolkPosted: Tue Mar 22, 2011 11:35 am ---- Xsi cylinder head
106 Gti bottom end
C2 Vts inlet manifold
Ported TB
4-1
= WIN
#24: Re: 1.6l 16v - Anyone got one?? Author: Lee, Location: EnglandPosted: Tue Mar 22, 2011 11:36 am ---- It more than likely won't.
What linkages are you getting? Make sure they are for the MA gearbox, as the majority that are sold are for the BE
#25: Re: 1.6l 16v - Anyone got one?? Author: -Dave-, Location: North ManchesterPosted: Tue Mar 22, 2011 11:43 am ----
Lee wrote:
It more than likely won't.
What linkages are you getting? Make sure they are for the MA gearbox, as the majority that are sold are for the BE
To be honest mate I don't know the differance between the gearbox's, I have been recommended these
But if you know any better please share :lol:, I'm hoping by installing these and the quickshift i will at least make the gear change's a bit more pleasant.
#26: Re: 1.6l 16v - Anyone got one?? Author: Seabook, Posted: Tue Mar 22, 2011 11:47 am ----
Addaz wrote:
Xsi cylinder head
106 Gti bottom end
C2 Vts inlet manifold
Ported TB
4-1
= WIN
without cam mod this is a loser lol
#27: Re: 1.6l 16v - Anyone got one?? Author: Lee, Location: EnglandPosted: Tue Mar 22, 2011 11:54 am ----
Suicidalsoldi3r wrote:
Lee wrote:
It more than likely won't.
What linkages are you getting? Make sure they are for the MA gearbox, as the majority that are sold are for the BE
To be honest mate I don't know the differance between the gearbox's, I have been recommended these
But if you know any better please share :lol:, I'm hoping by installing these and the quickshift i will at least make the gear change's a bit more pleasant.
Yeah they should be fine
#28: Re: 1.6l 16v - Anyone got one?? Author: kieron, Location: in the housePosted: Tue Mar 22, 2011 11:59 am ---- they is lots of info and tuning on c2club on this engine, most people go for c2vts inlet, catcams with 106 gti vernier pullys, ashley manifold and remap and results are about 140-145bhp
they is lots of info and tuning on c2club on this engine, most people go for c2vts inlet, catcams with 106 gti vernier pullys, ashley manifold and remap and results are about 140-145bhp
Xsi cylinder head
106 Gti bottom end
C2 Vts inlet manifold
Ported TB
4-1
= WIN
without cam mod this is a loser lol
This is the set up im going for when I finally build the turbo engine, with forged pistons. However you are forgetting you may need a 106 gearbox which is cable not hydraulic.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17132
Online Now [59]:
Visitors: 58
Members: 0
Staff Online Now:
Page Views:
General
