#1: Crystals Author: Ben.M, Location: SuffolkPosted: Thu Mar 24, 2011 11:55 am ---- I currently have frosted headlights and really want some crystals...that was until I saw this, 206info.co.uk/Forums/v...art=0.html
Is there anyway better way to do this??? I am normally fine with electrics but this just baffles me and I dont know if I have the right connectors etc. :/
Ben.M
#2: Re: Crystals Author: CD-B3, Location: Salisbury / New ForestPosted: Thu Mar 24, 2011 11:56 am ---- Pay someone else to make up the loom.
#3: Re: Crystals Author: Danw_VVT, Location: Herts/LondonPosted: Thu Mar 24, 2011 11:57 am ----
CD-vRS wrote:
Pay someone else to make up the loom.
#4: Re: Crystals Author: Ben.M, Location: SuffolkPosted: Thu Mar 24, 2011 11:59 am ----
Danw_VVT wrote:
CD-vRS wrote:
Pay someone else to make up the loom.
Are they the £20-25 ones(normally)???
Ben.M
#5: Re: Crystals Author: Lee, Location: EnglandPosted: Thu Mar 24, 2011 12:01 pm ---- Just get the setting in the BSI changed to double optics and buy the H7 plugs from PEugeot for about a tenner
Just get the setting in the BSI changed to double optics and buy the H7 plugs from PEugeot for about a tenner
That sounds easier
You know what im going to ask..........................how do I do that???
Ben.M
#7: Re: Crystals Author: Lee, Location: EnglandPosted: Thu Mar 24, 2011 12:06 pm ---- You going to the fast show?
#8: Re: Crystals Author: DJ-, Location: UKPosted: Thu Mar 24, 2011 12:06 pm ---- Or if you dont want to buy the h7 plugs and wire them in the car then i could possibly sell adapters for £20posted. Not a biggy as you could easily sell on if you put your car back to standard.
DJ-, I'm considering that pretty much the last resort at the moment but if nothing else can be done than I may be in touch with you
Ben.M
#10: Re: Crystals Author: Lee, Location: EnglandPosted: Thu Mar 24, 2011 12:17 pm ---- To turn it on in the BSI, you need someone with Peugeot Planet Office then just tweet the settings.
Shame because I'd have done it you for a fiver if you were going there.
To turn it on in the BSI, you need someone with Peugeot Planet Office then just tweet the settings.
Shame because I'd have done it you for a fiver if you were going there.
Thanks anyway Lee, I have a bid on a set of crystals on ebay now, i'll see what they go for then it looks like i'll have to make a decision on what im going to do,
Ben.M
#12: Re: Crystals Author: MrrNoName, Location: UKPosted: Thu Mar 24, 2011 12:42 pm ---- wiring in the relay sounds way more complicated then it is tbh, if you take a step back and look at it, all you have to do is connect one wire to the battery, one wire to the earth, one wire to the mainbeam feed and one to the dipped beam feed on both sides
esentially this happens:
you flick to main beam, this clicks to relay to on, power is then drawn through the relay from the connection to the battery, and goes to the dipped beam. this gives you dipped and main at the same time
when you flick back to dipped, the relay looses its input (from main beam) so clicks off, stopping the power to dipped from the relay)
it took me ages to get my head around it, but its not that bad
wiring in the relay sounds way more complicated then it is tbh, if you take a step back and look at it, all you have to do is connect one wire to the battery, one wire to the earth, one wire to the mainbeam feed and one to the dipped beam feed on both sides
esentially this happens:
you flick to main beam, this clicks to relay to on, power is then drawn through the relay from the connection to the battery, and goes to the dipped beam. this gives you dipped and main at the same time
when you flick back to dipped, the relay looses its input (from main beam) so clicks off, stopping the power to dipped from the relay)
it took me ages to get my head around it, but its not that bad
Hmmm, that does actually make sense :D, I think its the diagrams that I struggle to understand really, what else do I need apart from the relay???
Thanks,
Ben.M
#14: Re: Crystals Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Thu Mar 24, 2011 1:20 pm ---- Bit of cable, fuse, connectors,
#16: Re: Crystals Author: MrBSI, Location: What's it to you? ? ?Posted: Fri Mar 25, 2011 2:42 pm ----
MrrNoName wrote:
wiring in the relay sounds way more complicated then it is tbh, if you take a step back and look at it, all you have to do is connect one wire to the battery, one wire to the earth, one wire to the mainbeam feed and one to the dipped beam feed on both sides
esentially this happens:
you flick to main beam, this clicks to relay to on, power is then drawn through the relay from the connection to the battery, and goes to the dipped beam. this gives you dipped and main at the same time
when you flick back to dipped, the relay looses its input (from main beam) so clicks off, stopping the power to dipped from the relay)
it took me ages to get my head around it, but its not that bad
So much easier to just fit the grey H7 plugs in place of the black H4's & tweak the BSI configuration.
No need to mess about with relays then
#17: Re: Crystals Author: Ben.M, Location: SuffolkPosted: Thu Mar 31, 2011 10:55 am ---- If I were to get some H4 angels, would I still need the BSI tweaking or not and are most angels H4 fitting???
Thanks,
Ben.M
#18: Re: Crystals Author: MrrNoName, Location: UKPosted: Thu Mar 31, 2011 12:26 pm ---- as angels are H4 fitting you wouldnt need H7 plugs, but because they have two lenses (one for dipped, one for main) you still need the BSI changed to get them both on at the same time (or a H4 - H4 adapter) as shown in the bottom two diagrams on the first page
they will fit and work without any alterations but when you put your main on the dipped will go off..
as angels are H4 fitting you wouldnt need H7 plugs, but because they have two lenses (one for dipped, one for main) you still need the BSI changed to get them both on at the same time (or a H4 - H4 adapter) as shown in the bottom two diagrams on the first page
they will fit and work without any alterations but when you put your main on the dipped will go off..
But I currently have H4 frosted, why would I need H7 plugs??? :/
Ben.M
#20: Re: Crystals Author: Lee, Location: EnglandPosted: Thu Mar 31, 2011 1:25 pm ---- They will just plug 'n play. But you'll need the BSI tweeking or fit a relay for the dipped beam to stay on when the main beam is on
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17134
Online Now [685]:
Visitors: 684
Members: 0
Staff Online Now:
Page Views:
General
