#16: Re: RPM Sensor Author: Edward, Location: In the garagePosted: Sat Mar 26, 2011 8:44 am ---- That wiring is normal.
This is what my plug looked like...the wiring is twisted through the shielded sleeving.
#17: Re: RPM Sensor Author: leigh_boy, Location: EastbournePosted: Sat Mar 26, 2011 1:00 pm ----
Lee wrote:
What years the car?
Might be just the throttle thats messed up
1999
#18: Re: RPM Sensor Author: leigh_boy, Location: EastbournePosted: Sat Mar 26, 2011 1:01 pm ----
Edward wrote:
That wiring is normal.
This is what my plug looked like...the wiring is twisted through the shielded sleeving.
dam thats clean, what is the that ontop of the thermostat housing? thats not standard isit? if it is i don't have 1 lol
#19: Re: RPM Sensor Author: Edward, Location: In the garagePosted: Sat Mar 26, 2011 2:06 pm ---- It's a horrible coolant temp sensor for the Omex ECU. It sits in the hole that the bleed screw will be on yours. It's getting changed in a couple of weeks when my Samco hoses arrive (at last).
#20: Re: RPM Sensor Author: MrBSI, Location: What's it to you? ? ?Posted: Sat Mar 26, 2011 2:26 pm ----
leigh_boy wrote:
sesnor that have been replaced with NEW
coolent, crank sensor, cam sensor, TPS, Idle control valve, Air Temp sensor, 1 injector, o2 Sesnor and the map sensor
center exhaust pipe, rear box, spark plugs
also checked the timing yestaday
running out of things to change
The car
You have wasted enough money on this one so far throwing new parts at it in an attempt to fix it
#21: Re: RPM Sensor Author: leigh_boy, Location: EastbournePosted: Sat Mar 26, 2011 2:28 pm ----
MrBSI wrote:
leigh_boy wrote:
sesnor that have been replaced with NEW
coolent, crank sensor, cam sensor, TPS, Idle control valve, Air Temp sensor, 1 injector, o2 Sesnor and the map sensor
center exhaust pipe, rear box, spark plugs
also checked the timing yestaday
running out of things to change
The car
You have wasted enough money on this one so far throwing new parts at it in an attempt to fix it
it only cost me £280 to begin with so think its still wortha bit more hassle not much tho
#22: Re: RPM Sensor Author: MrBSI, Location: What's it to you? ? ?Posted: Sat Mar 26, 2011 2:36 pm ----
leigh_boy wrote:
MrBSI wrote:
leigh_boy wrote:
sesnor that have been replaced with NEW
coolent, crank sensor, cam sensor, TPS, Idle control valve, Air Temp sensor, 1 injector, o2 Sesnor and the map sensor
center exhaust pipe, rear box, spark plugs
also checked the timing yestaday
running out of things to change
The car
You have wasted enough money on this one so far throwing new parts at it in an attempt to fix it
it only cost me £280 to begin with so think its still wortha bit more hassle not much tho
It sounds like your just slowly rebuilding the car from new parts & crossing your fingers one of these parts is gonna fix it.
#23: Re: RPM Sensor Author: leigh_boy, Location: EastbournePosted: Sat Mar 26, 2011 2:38 pm ----
MrBSI wrote:
leigh_boy wrote:
MrBSI wrote:
leigh_boy wrote:
sesnor that have been replaced with NEW
coolent, crank sensor, cam sensor, TPS, Idle control valve, Air Temp sensor, 1 injector, o2 Sesnor and the map sensor
center exhaust pipe, rear box, spark plugs
also checked the timing yestaday
running out of things to change
The car
You have wasted enough money on this one so far throwing new parts at it in an attempt to fix it
it only cost me £280 to begin with so think its still wortha bit more hassle not much tho
It sounds like your just slowly rebuilding the car from new parts & crossing your fingers one of these parts is gonna fix it.
your about right on that 1, soon i will get an engine, and a ecu / wireing
#24: Re: RPM Sensor Author: leigh_boy, Location: EastbournePosted: Sat Mar 26, 2011 2:44 pm ---- back to what lee was saying whats CAN ?
#25: Re: RPM Sensor Author: MrBSI, Location: What's it to you? ? ?Posted: Sat Mar 26, 2011 2:46 pm ----
leigh_boy wrote:
back to what lee was saying whats CAN ?
Controller Area Network
#26: Re: RPM Sensor Author: leigh_boy, Location: EastbournePosted: Sat Mar 26, 2011 2:52 pm ---- and the relivance to the question??
#27: Re: RPM Sensor Author: MrBSI, Location: What's it to you? ? ?Posted: Sat Mar 26, 2011 2:54 pm ----
leigh_boy wrote:
and the relivance to the question??
Multiplexed 206's use it.
The wires twisted like that look like typical CAN twisted pair wiring.
#28: Re: RPM Sensor Author: leigh_boy, Location: EastbournePosted: Sat Mar 26, 2011 3:32 pm ----
leigh_boy wrote:
Lee wrote:
What years the car?
Might be just the throttle thats messed up
1999
so what could be messed up about the throttle?
#29: Re: RPM Sensor Author: Lee, Location: EnglandPosted: Sat Mar 26, 2011 4:05 pm ---- Take it to a garage with either Pug Planet, Multi Di@g or Bosch KTS or something similar.
Not the w**ky generic EOBD readers
#30: Re: RPM Sensor Author: leigh_boy, Location: EastbournePosted: Sat Mar 26, 2011 4:14 pm ---- im going to book it in for ecu firmware updates next week its only £40 so will ask about diagnotics but don't want to spend loads at a dealer as i feel violated going to a dealer lol
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 1
New Yesterday: 0
Overall: 17131
Online Now [254]:
Visitors: 254
Members: 0
Staff Online Now:
Page Views:
General
