#1: drive shafted! Author: jamie_206, Location: DoncasterPosted: Sat Mar 26, 2011 1:25 pm ---- Hi
I was changing my driverside shocks for coilovers yesterday . When refitting the coily the driveshaft popped out and now it wont go in . It dosent seem to line up with the grooves in the bearing . Should it just be as easy as lining the splines on the shaft with the splines in the bearing ? Then re fitting a new gaitor.
cheers
#2: Re: drive shafted! Author: jamie_206, Location: DoncasterPosted: Sun Mar 27, 2011 5:13 am ---- Anyone?
#3: Re: drive shafted! Author: macj, Location: EssexPosted: Sun Mar 27, 2011 5:34 am ---- Did the gaiter pop off as well.... put a little lube on the spline, it should go in easily
#4: Re: drive shafted! Author: jamie_206, Location: DoncasterPosted: Sun Mar 27, 2011 11:24 am ---- No the gaitor ripped . So ive replaced that . I bunjie corded the hub up to stabalize it fitted a new ring clip to the shaft end and popped it in no problem.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [325]:
Visitors: 324
Members: 0
Staff Online Now:
Page Views:
General
