#106: Re: ushers now track project Author: usher, Location: northallertonPosted: Tue May 07, 2013 3:33 pm ---- Fibre glass bonnet is on the card eventually but more important things first like seats lol
Been at it again removed carpet and roof lining with some underlay stoll the main part in the fiotwells to go new total removed is 108kg the speaker cables were 5kg alone lol
#107: Re: ushers now track project Author: usher, Location: northallertonPosted: Sun May 12, 2013 12:23 pm ---- Got more done today. Dash is out. passanger air bag is out just need to remove the cover off it to put it back on. Nothing weighed atm as it started to rain and I had bits all over the place lol. In this pic it's actually running so assuming that I can remove ove all other wires near enough
Last edited by usher on Sat May 18, 2013 12:24 pm; edited 3 times in total
#108: Re: ushers now track project Author: macj, Location: EssexPosted: Sun May 12, 2013 1:06 pm ---- I can feel a rally car coming on
#109: Re: ushers now track project Author: usher, Location: northallertonPosted: Sun May 12, 2013 1:31 pm ---- Lol I can't afford to be replacing bits I leave behind after mistakes lol and the Mrs wouldn't like it too much. Strictly track for me
#110: Re: ushers now track project Author: usher, Location: northallertonPosted: Sun May 12, 2013 1:31 pm ---- Lol I can't afford to be replacing bits I leave behind after mistakes lol and the Mrs wouldn't like it too much. Strictly track for me
#111: Re: ushers now track project Author: jonsully, Location: irelandPosted: Sun May 12, 2013 1:58 pm ----
usher wrote:
Got more done today. Dash is out. passanger air bag is out just need to remove the cover off it to put it back on. Nothing weighed atm as it started to rain and I had bits all over the place lol. In this pic it's actually running so assuming that I can remove ove all other wires near enough
if u want to put the airbag to use heres what i did wit my passenger one
#112: Re: ushers now track project Author: usher, Location: northallertonPosted: Sun May 12, 2013 2:32 pm ---- lol glad it didnt go off as to remove it i had my head on it
i see what you ment by the front underlay being heavy its huge, how much more did you remove to get it out or did you hack at it, also did you remove the matrix?
#113: Re: ushers now track project Author: jonsully, Location: irelandPosted: Sun May 12, 2013 3:04 pm ----
usher wrote:
lol glad it didnt go off as to remove it i had my head on it
i see what you ment by the front underlay being heavy its huge, how much more did you remove to get it out or did you hack at it, also did you remove the matrix?
i removed all of the underlay used a knife to get it out and i also removed the matrix.the matrix is quite heavy.i forget exactly how many kgs but i have it lying in the garage ill weigh it 2m..
#114: Re: ushers now track project (harnedded arrived) Author: usher, Location: northallertonPosted: Sat May 18, 2013 12:19 pm ---- had these arrive the other day cost near enough 40 posted which i thought was a bargain
#115: Re: ushers now track project (harnesses arrived) Author: macj, Location: EssexPosted: Sun May 19, 2013 4:14 am ---- I will have these seats for sale at the end of July when the MSA date expires for rallying
#116: Re: ushers now track project (harnesses arrived) Author: usher, Location: northallertonPosted: Sun May 19, 2013 5:26 am ---- I got some seats coming next week I think paid 30 for them again A bargain
Question is how do you fit the point for the middle of the car is it a case of weld in new mounts
#117: Re: ushers now track project (harnesses arrived) Author: macj, Location: EssexPosted: Sun May 19, 2013 6:16 am ---- You have two choices..... weld in new cross rails to blot your seat to or buy the base plate from OMP which is suppose to fit your existing mounts but needs a small tweak
#118: Re: ushers now track project (harnesses arrived) Author: usher, Location: northallertonPosted: Sun May 19, 2013 8:57 am ---- Nice and easy then. I'll make so e subframe up and get some 206 runners for them. What thickness of sheet metal would you use 4mm?
#119: Re: ushers now track project (harnesses arrived) Author: macj, Location: EssexPosted: Sun May 19, 2013 8:59 am ---- mine are made from 3mm sheet I think .... plenty if you include bends in them....
#120: Re: ushers now track project (harnesses arrived) Author: usher, Location: northallertonPosted: Sun May 19, 2013 9:18 am ---- Ill do that then and use the rear seat mounts for the shoulder belt
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [220]:
Visitors: 219
Members: 0
Staff Online Now:
Page Views:
General
