#211: Re: ushers track project fully stripped and trimmed Author: usher, Location: northallertonPosted: Sat Apr 19, 2014 2:22 pm ---- They will once I have sorted the cage and rear window as for now as it's a used access in to the car.
#213: Re: ushers track project fully stripped and trimmed Author: usher, Location: northallertonPosted: Sat Apr 19, 2014 4:20 pm ---- hoping to have one about 30 if possible i know its a big ask lol
#214: Re: ushers track project fully stripped and trimmed Author: usher, Location: northallertonPosted: Mon Apr 21, 2014 6:19 am ---- made a start on the wiring again cutting away bits that are for the rear as the donor loom had been cut with these in
i think i messed up the wipers and lights but there going on switches anyway the bsi only has a couple of wires going to it now, the car runs still(ended up with an interestin issue of taking the key out and the engine running for a few seconds after, home made turbo timer ?) and dials are showing accurate readings so still happy, just a little more untangling to do today hopefully then tuck it away
#215: Re: ushers track project fully stripped and trimmed Author: usher, Location: northallertonPosted: Mon Apr 21, 2014 9:12 am ---- Windows cleaned and polished with some wax to help prevent scratches look alot better now
#216: Re: ushers track project fully stripped and trimmed Author: macj, Location: EssexPosted: Mon Apr 21, 2014 10:34 am ---- taking shape now bud.......good job
#217: Re: ushers track project fully stripped and trimmed Author: PezHdi, Location: ShrewsburyPosted: Mon Apr 21, 2014 11:18 am ---- See where there back windows are screwd In. You want to get somthjng to make the lip black as it will fit in the bump strips looking good tho
#218: Re: ushers track project fully stripped and trimmed Author: usher, Location: northallertonPosted: Mon Apr 21, 2014 12:05 pm ---- too late now for that i riviyed them in and used some really strong glu/sealent also they have been bowed in from the lip of the window frame so lessons have been learnt
macj
it is getting there slowly ive started more on the wires i only have 3 wires coming from the bsi lol, wiper not working but they going on a switch also lights not working from std wiring, the rad fan is now on a switch so when it comes to itb time all ill have to do is add the ecu to the engine loom the rest will be good
i was planning on doing this when i get the itbs but got snip happy again shouldnt take much to add lives to the wipers and lights surely
back at work now so progress will be at the usual pace haha
#219: Re: ushers track project fully stripped and trimmed Author: usher, Location: northallertonPosted: Mon Apr 21, 2014 12:05 pm ---- oh and ive traded up on the work chair its now got legs and everything
too late now for that i riviyed them in and used some really strong glu/sealent also they have been bowed in from the lip of the window frame so lessons have been learnt
macj
it is getting there slowly ive started more on the wires i only have 3 wires coming from the bsi lol, wiper not working but they going on a switch also lights not working from std wiring, the rad fan is now on a switch so when it comes to itb time all ill have to do is add the ecu to the engine loom the rest will be good
i was planning on doing this when i get the itbs but got snip happy again shouldnt take much to add lives to the wipers and lights surely
back at work now so progress will be at the usual pace haha
I found the lighting wires on the stalk on a process of elimination.... found where to feed the live and then got the sides and dip beam.... click the switch for flash and you will find full beam. A power probe is a real help here
#222: Re: ushers track project fully stripped and trimmed Author: usher, Location: northallertonPosted: Mon Apr 21, 2014 12:50 pm ---- yeah gonna do the same try each wire and see what happens
too late now for that i riviyed them in and used some really strong glu/sealent also they have been bowed in from the lip of the window frame so lessons have been learnt
macj
it is getting there slowly ive started more on the wires i only have 3 wires coming from the bsi lol, wiper not working but they going on a switch also lights not working from std wiring, the rad fan is now on a switch so when it comes to itb time all ill have to do is add the ecu to the engine loom the rest will be good
i was planning on doing this when i get the itbs but got snip happy again shouldnt take much to add lives to the wipers and lights surely
back at work now so progress will be at the usual pace haha
long shot but do you remember which wires
I found the lighting wires on the stalk on a process of elimination.... found where to feed the live and then got the sides and dip beam.... click the switch for flash and you will find full beam. A power probe is a real help here
#224: Re: ushers track project fully stripped and trimmed Author: macj, Location: EssexPosted: Tue Apr 22, 2014 12:26 am ---- I know they were french
#225: Re: ushers track project fully stripped and trimmed Author: usher, Location: northallertonPosted: Wed Apr 23, 2014 12:15 am ---- best put them in the bin then
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [73]:
Visitors: 72
Members: 0
Staff Online Now:
Page Views:
General
looking good tho 
also they have been bowed in from the lip of the window frame so lessons have been learnt 
shouldnt take much to add lives to the wipers and lights surely 
