#1: Problems After BSI Replacement Author: Punky, Location: ChesirePosted: Tue Mar 29, 2011 9:56 am ---- I've just had my BSI unit replaced as it was faulty and the windscreen wipers had stopped working.
Since it's been replaced I've noticed a couple of things aren't working right and wondered how I go about restting them or if they are correct.
1 - The oil temp gauge no longer works and I've been told that it's a fault with the sensor, but I'm sure it worked before the BSI was replaced.
2 - When you have the headlights on and turn the main beam on, the headlights go off. The car has seperate bulds for the two.
3 - I was getting an auto lighting fault when you turned the car on, this wasn't there before. The guy who swapped the BSI has disabled the sensor so I no longer get the error, but it also means the auto rain sensor doesn't work either.
Anyone any ideas on what the faults could be or if it's just a setting in the BSI then what setting.
I've got a 53 plate 206 HDi.
Cheers for any help.
#2: Re: Problems After BSI Replacement Author: MrBSI, Location: What's it to you? ? ?Posted: Tue Mar 29, 2011 11:50 am ---- 2nd hand unit I take it?
Sounds like a right bodge up
#3: Re: Problems After BSI Replacement Author: Punky, Location: ChesirePosted: Tue Mar 29, 2011 3:34 pm ---- Yeah I think it was a second hand one. Guy said he had years experience with them. Seemed to know what he was doing, but as you probed a little deeper into some of the things he said I'm not too sure.
#4: Re: Problems After BSI Replacement Author: Lee, Location: EnglandPosted: Tue Mar 29, 2011 4:36 pm ---- The settings need activating in the BSI again.
sounds like he hasn't set it up right
#5: Re: Problems After BSI Replacement Author: Punky, Location: ChesirePosted: Wed Mar 30, 2011 3:02 am ---- Don't suppose you know anyone good around the Cheshire area who'd go through the settings?
#6: Re: Problems After BSI Replacement Author: Lee, Location: EnglandPosted: Wed Mar 30, 2011 3:57 am ---- Probably have to go to Peugeot unless there's a auto-electrician that can do it.
I'd take it back to the guy.
It would cost about £65 for me to come and do it.
#7: Re: Problems After BSI Replacement Author: MrBSI, Location: What's it to you? ? ?Posted: Wed Mar 30, 2011 12:27 pm ----
Punky wrote:
Yeah I think it was a second hand one. Guy said he had years experience with them. Seemed to know what he was doing
If he knew what he was doing you wouldnt have joined up on here to ask this question
Mileage display ok?
Factory radio still working ok?
#8: Re: Problems After BSI Replacement Author: Davels, Location: NorfolkPosted: Wed Mar 30, 2011 12:55 pm ---- Lee has been offering advice on my ECU problems and I can say this is a chap who knows his stuff, (not that I do but like you say the more speak to someone the more you get an idea of what they are about) If you want it done properly I would seriously think about taking him up on his offer. I know money may be tight though after already paying for the replacement unit.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17131
Online Now [62]:
Visitors: 62
Members: 0
Staff Online Now:
Page Views:
General
