#1: Jamie: GTi180 Author: Jamie, Location: Ring y0Posted: Sun Feb 07, 2010 3:47 pm ---- I had a 2001 1.4 Quiksilver as my first car and quickly got into browsing eGay for various parts and upgrades. Made a few amateur errors such as a gay carbon skinned fibreglass bonnet with gash vent.
However as I got more involved with different forums and started properly getting into the car it started to take shape.
I'd always liked the euro cars and seeing as my little 8 valver wasn't going anywhere fast I decided that I wasn't going to focus on performance and I would just modify it aesthetically... anyway 2 years later and it looked like this;
However I turned 19 and was growing bored of the car, and after having gone on track at FCS09 I knew I wanted to upgrade.
I was looking at RS Clio 172s and Type R's but out of nowhere I was offered a 2004 Aegean Blue GTi180 at little over £3k. It had 2 owners from new, service history, completely standard and 60k miles, and was too good to refuse. So I checked I could afford the insurance, which at 19 wasn't friendly, but worth it!
So a trip to Tamworth secured me this;
However before picking the thing up I was already buying stuff for it! At the start this was small stuff like RC vinyls, and getting the wheels refurbed as well as adding the sp arch extensions and stainless steel mesh grilles;
I also picked up some Keskin KT1s in the hope they may look ball achingly epic;
...but they really didn't suit the look I was going for, and worth far too much just to keep to gather dust in the garage, so they sold to a guy in Ireland at a massive loss seeing as the wheels and tyres cost me well over £1k to put together
Then used the money to purchase some more goodies like a scorpion exhaust and morettes;
At the end of October I sold the Quiksilver which released a wad of cash, that was poured back into the current wip, which I was determined to make more track focused than visually pleasing
The extra money enabled me to take a trip down to Rimstyle to procure some of these bad boys;
With some Toyo T1R tyres. I then focused on the suspension,I had grown tired of the impracticality of wound down coilovers on my last car, so opted for Bilstein B6 dampers with Eibach Sportline springs. For the rear I bought some stupidly expensive Peugeot Sport torsion bars, upgrading from 20mm to 24mm
Quick w**re session with a decent photographer;
Then towards the end of November I decided I would take the plunge and made my way to Adenau!
Definitely the best thing I have done and can't wait to get back out there
When I got back I bought a scangauge to keep an eye on various sensors for me, but disappointed it hasn't got the ability to monitor oil temp! Other than that a great piece of kit;
Anyway here's a few pics of how it stands now;
I have made a few purchases recently that haven't been fitted yet, such as a K&N panel filter, janspeed exhaust, more wheels, GoPro Motorsports Hero HD (via recommendation on here), Alpine IDA X305, and mocal oil filter with stat in sandwich plate;
Unfortunately had a bit of bad luck on the M50 in February and managed to blow out both my passenger side tyres and destroy the wheels, and bizarrely damage my passenger wing mirror. Needless to say I am very confused as to how it happened, as there were no other cars on the road and no barriers/anything else to hit!
Anyway repairs are under way and the car will be back on the road very soon ready for my next planned Nurburgring trip in April!
Also ordered my Jenveys, which arrived and look like this;
Got my brakes through from Kam Racing;
Should all be done ready for FCS!
Got my Morettes on too;
Thanks to Macj I have ordered my cams, Catcams 804!
These have been sent down to Devon already as well as the manifold for Sandy to do some measuring and do some wizardry with them!
Spec List
(Engine spec to be built July/August by Sandy Brown & Colin Satchel)
Engine
EW10J4S
Catcams 804
Catcams exhaust vernier pulley
Jenvey inlet manifold, ported to match head
45mm Jenvey DCOE Throttle Bodies with 45x90mm trumpets
DTA S60 ECU (hopefully running DBW throttle)
Loom & mapping by Sandy & Colin
Janspeed Exhaust
Mocal Oil Cooler w/thermostat style sandwich plate
Headwork
Chassis
Bilstein B6 dampers
Eibach Sportline springs
Peugeot Sport 24mm Torsion bars
Lowered 35mm
Vibra Technics/Baker BM engine mounts
Peugeot Sport Grp N solid rubber topmounts
16x7" Team Dynamics Pro Race 1.2 (Toyo Proxes tyres)
Brembo 4 pot calipers
Carbon Lorraine RC5+ pads all round
Maxtorq Grp N discs all round
Custom braided hoses
Eibach 10mm hubcentric aluminum spacers
Exterior
Full SP kit
FK rear Jewell lights
Various decals
Morettes
Interior
Alpine IDA X305
Scangauge II
Thanks for reading!
Last edited by Jamie on Sat Jun 05, 2010 3:20 pm; edited 7 times in total
#2: Re: Jamie: GTi180 Author: Dave, Location: BirminghamPosted: Sun Feb 07, 2010 3:56 pm ---- Love the cheeky mention of the Jenveys at the end! lol!
#3: Re: Jamie: GTi180 Author: Jamie, Location: Ring y0Posted: Sun Feb 07, 2010 4:16 pm ---- Cheeky
#4: Re: Jamie: GTi180 Author: JamieM, Posted: Sun Feb 07, 2010 5:57 pm ---- Nice car, reminds me of my old one but with black pro race 1.2s instead of my white ones:)
#5: Re: Jamie: GTi180 Author: Ross, Location: West MidlandsPosted: Sun Feb 07, 2010 5:59 pm ---- You've bought some more wheels? What are they?
#6: Re: Jamie: GTi180 Author: Guy, Location: Solihull, BirminghamPosted: Sun Feb 07, 2010 7:14 pm ---- Sound lovelyyyy! Keep up with the update
#7: Re: Jamie: GTi180 Author: Jamie, Location: Ring y0Posted: Mon Feb 08, 2010 8:05 am ---- Calm down Ross I've bought the same wheels, I toyed with the idea of Turinis or a set of comps but I love the Pro Race too much!
#8: Re: Jamie: GTi180 Author: Seb, Location: Under your bedPosted: Mon Feb 08, 2010 8:25 am ----
Jamie wrote:
However I turned 19 and was growing bored of the car, and after having gone on track at FCS09 I knew I wanted to upgrade.
I only blame myself for that one
Nice work, keep it up.
#9: Re: Jamie: GTi180 Author: Jamie, Location: Ring y0Posted: Mon Feb 08, 2010 8:27 am ----
Seb wrote:
Jamie wrote:
However I turned 19 and was growing bored of the car, and after having gone on track at FCS09 I knew I wanted to upgrade.
I only blame myself for that one
Nice work, keep it up.
You can repay me with a passenger lap, I'll even record it for you if you want, in HD
#10: Re: Jamie: GTi180 Author: Seb, Location: Under your bedPosted: Mon Feb 08, 2010 8:29 am ---- Why not, I'm on for 2 sessions this year I hope. Just gotta get that damn blower on first.
#11: Re: Jamie: GTi180 Author: Jamie, Location: Ring y0Posted: Mon Feb 08, 2010 8:31 am ---- I have 2 car cams now, so I can even lend you one for your other lap if you want?
I have booked one session of tracktime, you can bunk in with me if you want too?
#12: Re: Jamie: GTi180 Author: Seb, Location: Under your bedPosted: Mon Feb 08, 2010 8:32 am ---- Yeah man, everything is good
Sounds like a plan! Cheers
#13: Re: Jamie: GTi180 Author: Ape, Location: Clipping the Apex!Posted: Mon Feb 08, 2010 8:36 am ---- I'll have a couple of sessions booked as well hopefully. Be great to all be on together
#14: Re: Jamie: GTi180 Author: Seb, Location: Under your bedPosted: Mon Feb 08, 2010 8:37 am ---- It would be yeah, but I have a feeling it'll all be screwed around like it was last year, they don't put people on with the same car club bizarrely. Wish they did.
#15: Re: Jamie: GTi180 Author: Jamie, Location: Ring y0Posted: Mon Feb 08, 2010 8:38 am ---- I put "Been on track before" so hopefully you all did too!
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [195]:
Visitors: 194
Members: 0
Staff Online Now:
Page Views:
General
