#1: passenger seat Author: Taff!, Location: Havant nr PortsmouthPosted: Thu Apr 28, 2011 2:11 am ---- My passenger seat is stuck as far forward as it will go. Can someone confirm if the passenger seat has a sliding stop like the drivers seat please [can't see it!].
Many thanks in advance.
#2: Re: passenger seat Author: iainlovatt, Posted: Thu Apr 28, 2011 2:14 am ---- yes it does, i know it sounds daft but sit in the seat and bounce, sometimes for me anyway un-sticks the seat!
#3: Re: passenger seat Author: Taff!, Location: Havant nr PortsmouthPosted: Thu Apr 28, 2011 2:30 am ---- Doesn't sound daft at all. I do that when it occassionally happens with my seat but there's no shifting the passenger one. I didn't know if it was the slider or not but it's pushed right up into the tracks. Not too sure how I can get it out without prodding it loads as you can't access it anyway even if you take the seat out.
#4: Re: passenger seat Author: iainlovatt, Posted: Thu Apr 28, 2011 3:00 am ---- flat headed screwdriver? pull all the leavers on the seat first!!!
#5: Re: passenger seat Author: Taff!, Location: Havant nr PortsmouthPosted: Thu Apr 28, 2011 6:18 am ---- Just found the problem. Managed to get the sliding stop out and found out what the problem is. The flat plate at the front of the sliding stop has sheared off and is now stuck. Will need to take the seat out tonight and giove it a shake I think... hmmmf
#6: Re: passenger seat Author: Taff!, Location: Havant nr PortsmouthPosted: Thu Apr 28, 2011 6:34 am ---- Althugh taking the seat out when I can't access the front torq bolts is esier said than done!!
#7: Re: passenger seat Author: punk, Location: BrumPosted: Thu Apr 28, 2011 7:19 am ---- Iv got the same probably on my passenger seat, seen quite a few of these posts
#8: Re: passenger seat Author: Taff!, Location: Havant nr PortsmouthPosted: Thu Apr 28, 2011 7:30 am ---- Seen a few too although mostly about the tilting mechanism
#9: Re: passenger seat Author: Taff!, Location: Havant nr PortsmouthPosted: Thu Apr 28, 2011 12:25 pm ---- Managed to get it out with the aid of some cursing. Bendy metal bar also helped. Thanks
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [57]:
Visitors: 56
Members: 0
Staff Online Now:
Page Views:
General
