#436: Re: Cruise control Author: HDiMan, Location: high wycombe.BucksPosted: Wed Mar 31, 2010 1:14 pm ---- Looked at the 206cc today but didn't have time to speak to a master tech.The car had the 6242z8 stalk fitted and i was able to check if there was a brake switch on the brake pedal next to where the clutch switch is fitted but nothing fitted there.The salesman wouldn't let me remove the carpet trim under the glovebox to check the brake switch to see if it had 2 or 4 wire on it which was a shame.I did notice though,ESP was fitted.I also took down the VIN number as it might help with looking on servicebox for the parts needed. Last edited by HDiMan on Thu Apr 01, 2010 10:29 am; edited 1 time in total
#437: Re: Cruise control Author: vintageoriginal, Location: London, UKPosted: Wed Mar 31, 2010 2:59 pm ---- good work HDiMan!
#438: Re: Cruise control Author: HDiMan, Location: high wycombe.BucksPosted: Thu Apr 01, 2010 10:45 am ---- The 206cc i looked at has a different brake switch p/n 5434.40
This is fitted to cars with Regulator or speed limit (cruise control i think?)
OR
ESP.
My car has the std brake switch 4534.44 and i have no idea what the difference is yet ie 2 or 4 wire.
So I reckonn if you have ESP fitted,then yes you should be able to retro fit cruise control with a stalk and a BSI/ECU UPDATE.
I cannot find any other parts needed or different looms yet.
#439: Re: Cruise control Author: HDiMan, Location: high wycombe.BucksPosted: Fri Apr 02, 2010 12:46 pm ---- Been on several german 206 sites
Further update -
1.1,1.4,2.0 (138) petrol engines and 1.4,1.6 HDi Diesel engines cruise contol has not been able to be retro fitted with original equipment on multiplexed cars.
1.6 (110) petrol engine is the best engine to sucessfully have cc retro fitted if your BSI hasn't been locked at the factory or been updated.2002-2004 models has the most success rate about 80%.If your BSI is locked it can be unlocked by dealer if they can give Pug in France a chassis number from a car that had it factory fitted.
2.0 HDi Diesel engines - no idea as i found no info.
2.0 RC which is the equivalent of GTi 180 here - 50% success rate,again depends on BSI being unlocked,unfortunately if it's locked no way around it i'm afraid.
#440: Re: Cruise control Author: Lecktorious, Location: ScotlandPosted: Mon Apr 05, 2010 4:41 pm ---- Bit of a pain in the nuts it can't be done on the HDi 110.
Did you get a chance to speak to the Tech at all?
#441: Re: Cruise control Author: HDiMan, Location: high wycombe.BucksPosted: Fri Apr 09, 2010 8:02 am ---- Brake switch p/n 5434.40 has four connections and has a dome on the plunger.I haven't been able to speak to a master tech yet,tried twice but they have been too busy!
#442: Re: Cruise control Author: Joe, Location: SwindonPosted: Wed Apr 14, 2010 11:27 am ---- Fail
#443: Re: Cruise control Author: wagsy206, Location: Coatbridge, LanarkshirePosted: Wed Apr 14, 2010 11:54 am ---- just get one with cruise control fitted, lol. ive just spent £4995 to get cruise control ha ha ha.
Brake switch p/n 5434.40 has four connections and has a dome on the plunger.I haven't been able to speak to a master tech yet,tried twice but they have been too busy!
#446: Re: Cruise control Author: andrew96, Location: London UKPosted: Sun Apr 25, 2010 4:52 pm ---- Hi everyone
I have just found this thread and been reading with intrest
I too am wanting CC and YES have been sucessfull in fitting it! read on!
Mine is a 2006 206 verve 1.4 HDI (55 plate but registered Jan 2006) and MULTIPLEXED
It DOES have the 4 wire brake switch 5434.40 and the clutch switch 4534.28
The control i got was the 6242 Z9 one as the ebay seller sent me the wrong one! (wanted Z8)
i put it in the com2000 steering unit
used PP to change the BSI to CC present, fine
and ECU DID change to present on mine!
The instrument cluster would change to 'cruise control type 1 with/without speed restrictor' i set, then saved and it said download faulty, then doing a check the value changed to INVALID, but left it like that
took the car out for a run tonight, got to 55mph, switched CC on and took foot off accelerator, car slowed, its not working i thought, then when it got to 50 it stayed there! pressing the up button on the stalk car increased speed! press pause and deaccelerates, press pause again and car goes back up to cruise speed! so its working, but the instrument panel shows nothing of the CC, no CC50 comes up in it so guessing it seems for CC to work it needs the BSI and engine ECU enabled.
My next move is to send the CC control back to the ebay seller and get the right one with the limiter on as well
Hope this helps abit with the quest for everyone! i have managed it
cheers
Andrew Last edited by andrew96 on Sun Apr 25, 2010 5:03 pm; edited 2 times in total
#447: Re: Cruise control Author: andrew96, Location: London UKPosted: Sun Apr 25, 2010 4:54 pm ----
what CC is it? is it the one with the limiter on? if it is i am interested
cheers
Andrew
#448: Re: Cruise control Author: skard, Location: UK - NorthPosted: Sun Apr 25, 2010 5:34 pm ----
andrew96 wrote:
what CC is it? is it the one with the limiter on? if it is i am interested
cheers
Andrew
it sold, sorry.
#449: Re: Cruise control Author: andrew96, Location: London UKPosted: Sun Apr 25, 2010 5:38 pm ----
skard wrote:
andrew96 wrote:
what CC is it? is it the one with the limiter on? if it is i am interested
cheers
Andrew
it sold, sorry.
cheers no worries, will get the ebay seller to send the right one so hopefully the limiter part will work too
thanks again
Andrew
#450: Re: Cruise control Author: wagsy206, Location: Coatbridge, LanarkshirePosted: Mon Apr 26, 2010 11:18 am ---- so, even though it says "invalid" and said download faulty, it still worked?
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [358]:
Visitors: 357
Members: 0
Staff Online Now:
Page Views:
General
