#1: Space saver wheel help! Author: ukskater01, Location: sutton surrey/welwyn garden cityPosted: Sun May 29, 2011 8:03 am ---- Hi guys and girls, yet more problems!
I got a puncture because of a screw, so I fitted my crappy space saver, I thought Id check the pressure of it with my little compressor. It said it was only 15 psi so I pumped it up to the recommended 60 psi. As I pulled the pump off the inside of the valve came with it and all the air rushed out.
I'm thinking that I'm now stuffed, can I get a valve from somewhere and are they easy to replace? The space saver didn't look very good anyway!
Thanks for your time
Andrew
#2: Re: Space saver wheel help! Author: Seabook, Posted: Sun May 29, 2011 8:06 am ---- you will need to remove the tyre to fit the valve anyway....
any tyre place could do that for around 7-10 pound per corner
#3: Re: Space saver wheel help! Author: Lee, Location: EnglandPosted: Sun May 29, 2011 8:26 am ---- Lose the space saver and fit a steelie!
#4: Re: Space saver wheel help! Author: Timon2210, Location: PalestinePosted: Sun May 29, 2011 8:36 am ---- if you got the right too for that pin,you can re install it,I have one,and I used it to get other ppl tires flat if they park thier cars in my drive way (some ppl don't have maners),so I enjoy doing that,and see them do the replacment,sometimes I offer help as I'm passing,if the driver a pretty gal ;)..LOL
#5: Re: Space saver wheel help! Author: ukskater01, Location: sutton surrey/welwyn garden cityPosted: Sun May 29, 2011 9:46 am ---- Lol, I've had to get a taxi to the only place open, Kwickfit, cost me fifty quid but gave me a discount, think they felt sorry for me! Will a steelie fit under the car in the rack?
#6: Re: Space saver wheel help! Author: MrBSI, Location: What's it to you? ? ?Posted: Sun May 29, 2011 9:51 am ----
ukskater01 wrote:
Will a steelie fit under the car in the rack?
It will if you move the front of the spare cage down to the lower set of fixing holes
#7: Re: Space saver wheel help! Author: curly, Location: brightonPosted: Sun May 29, 2011 9:51 am ---- simple, walk to nearest fitting garage, n give them a quid for the nipple out the valve, or like abovce get one of the screw pin drivers,, couple of quid form halfrauds,, n recycle some one elses pin
and as above, through the space saver away,, there usless, they dont last long,, and are in my eyes seriously unsafe,,
for instance, would u drive a nice big porsche carrara 4s thats got 18 inch ceramic brakes, 22 inch high alloy wheels 330mm wide,,, to be replaced with a bit of tyre 30mm,,, :0
#8: Re: Space saver wheel help! Author: ukskater01, Location: sutton surrey/welwyn garden cityPosted: Sun May 29, 2011 2:07 pm ---- Your right curly, I'm gonna get a steelie and chuck the old space saver as its completely fudged! If anyone's got one let me know, I'm gonna go to a breakers soon though
Thanks for all the help!
#9: Re: Space saver wheel help! Author: meady, Location: basingstokePosted: Sun May 29, 2011 3:12 pm ---- i have a steel wheel (well actually its a 106 rallye wheel but still looks like a steely) how far is sutton from basingstoke
#10: Re: Space saver wheel help! Author: ukskater01, Location: sutton surrey/welwyn garden cityPosted: Sun May 29, 2011 4:05 pm ---- Meady it's about an hour away, might pm you if I can't get one closer
Thanks mate
#11: Re: Space saver wheel help! Author: curly, Location: brightonPosted: Sun May 29, 2011 5:33 pm ---- ok well just so u dont go kicking yourself, ied go and source a steel wheel carrior of a pug 106,, phase 1,, as they im allmost certain had normal steel wheel carriors underneigth,, or u may have a problem trying to mount it underneigth lol,,
#12: Re: Space saver wheel help! Author: ukskater01, Location: sutton surrey/welwyn garden cityPosted: Sun May 29, 2011 5:35 pm ---- Cheers mate, I'll have a look at the breakers
#13: Re: Space saver wheel help! Author: MrBSI, Location: What's it to you? ? ?Posted: Mon May 30, 2011 4:04 am ----
curly wrote:
ok well just so u dont go kicking yourself, ied go and source a steel wheel carrior of a pug 106,, phase 1,, as they im allmost certain had normal steel wheel carriors underneigth,, or u may have a problem trying to mount it underneigth lol,,
The standard 206 wheel carrier will happily take a full size steel wheel if you move it down to the lower mounting holes on the chassis, thats why Peugeot put the extra holes in there for.
#14: Re: Space saver wheel help! Author: ukskater01, Location: sutton surrey/welwyn garden cityPosted: Mon May 30, 2011 10:09 am ---- Thanks mr bsi, gotta get a steelie from a breakers now although I cant seeing them charge me much for one!
#15: Re: Space saver wheel help! Author: ukskater01, Location: sutton surrey/welwyn garden cityPosted: Mon May 30, 2011 12:17 pm ---- Sorry to be an annoyance but will I need to get the steel bolts aswell?
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 1
Overall: 17131
Online Now [313]:
Visitors: 312
Members: 0
Staff Online Now:
Page Views:
General
although I cant seeing them charge me much for one!
