#1: Dials / compatibility with other models Author: devman, Location: Hoddesdon, HertsPosted: Mon Jun 06, 2011 8:30 am ---- Hi all
I've got a pre-plex 2.0 HDi, and my speedo is shot.
I know there are the 1 plug and 2 plug variants, and I know there are the low spec and high spec variants, but do they vary between engine types? I.e Would a petrol set of dials fit mine?
Cheers
#2: Re: Dials / compatibility with other models Author: Rob2859, Location: HalifaxPosted: Mon Jun 06, 2011 9:02 am ---- I do not think petrol ones fit iirc
#3: Re: Dials / compatibility with other models Author: devman, Location: Hoddesdon, HertsPosted: Mon Jun 06, 2011 9:12 am ---- Bugger.
#4: Re: Dials / compatibility with other models Author: copey, Location: rochdalePosted: Mon Jun 06, 2011 9:20 am ---- also remember if petrol ones did fit, they would go right round to like 7/8k rpm, where as a diesel doesnt go that high
#5: Re: Dials / compatibility with other models Author: perry081064, Location: staffordshirePosted: Mon Jun 06, 2011 10:02 am ---- should have a part number on the back , and you will also see if they are 1 or 2 plug.
.. just pull the cowling towards you, then its one torx screw to remove.
there's also a code just under the speedo side at the front, but im not sure if this is relevent.
iirc there are 2 variants of the pre-plex type , exp important if fitting lockwood dials.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [76]:
Visitors: 75
Members: 0
Staff Online Now:
Page Views:
General
