#1: Lowered the front... Author: Mike_XS, Location: SouthamptonPosted: Thu Jun 09, 2011 8:36 am ---- I lowered the front of the 206 today on Bilstein shocks and 40mm lowering springs.
Doing slow manoeuvres there is a little bit of knocking coming off full lock. But not all the time.
While driving it's fine, no knocking at all. Any ideas? Or is it just settling in?
#2: Re: Lowered the front... Author: meady, Location: basingstokePosted: Thu Jun 09, 2011 8:40 am ---- Did u replace top mount bearings and drop links at the same time
#3: Re: Lowered the front... Author: Mike_XS, Location: SouthamptonPosted: Thu Jun 09, 2011 8:43 am ---- I didn't do the top mounts, the car is low milage I was hoping they would be ok. However, I have considered they could be what's knocking. Droplinks were done last year.
#4: Re: Lowered the front... Author: Ste, Location: Hull -or- The World Of Info CodePosted: Thu Jun 09, 2011 10:09 am ---- It'll be the top mounts if it's when your turning onto full lock, either that or your springs are binding and clunking as they twist. More likely be the topmounts though.
#5: Re: Lowered the front... Author: Mike_XS, Location: SouthamptonPosted: Thu Jun 09, 2011 10:34 am ---- Cheers Ste. I'll look at Replacing them. Should of done it at the time. But I was being lazy...reckon I should uprate them?
#6: Re: Lowered the front... Author: Seabook, Posted: Thu Jun 09, 2011 10:37 am ---- no you can't uprate the bearing cheaply. it will have to be special order.
get some peugeot stuff is fine.
#7: Re: Lowered the front... Author: Mike_XS, Location: SouthamptonPosted: Fri Jun 10, 2011 3:00 am ---- Cheers for the help
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [167]:
Visitors: 166
Members: 0
Staff Online Now:
Page Views:
General
