#1: how much movement should there be? Author: spud_owen, Location: ashby de la zouchPosted: Sat Jun 18, 2011 5:44 am ---- how much movement should there be in the gear box engine mount? ive got abit of movement from somewhere and although this replaced mount a couple of months ago i think it might have gone again. i removed it today and took some photos see below, is this worn or deos that seem about the right ammount of movement to have photos show the metal section in the extreme right and the extreme left position.
cheers mark
#2: Re: how much movement should there be? Author: NICKST, Location: Little hulton (worsley)Posted: Sat Jun 18, 2011 5:52 am ---- That looks about right to me did one on a customers car this morning looks the same.
#3: Re: how much movement should there be? Author: spud_owen, Location: ashby de la zouchPosted: Sat Jun 18, 2011 6:08 am ---- so it should be alright? must be the bottom mount moving them, top mount is fine how do you tell if the bottom mount is gone?
#4: Re: how much movement should there be? Author: Seabook, Posted: Sat Jun 18, 2011 6:11 am ---- the bottom mount seldom break at all....
#5: Re: how much movement should there be? Author: rttam, Location: devonPosted: Sat Jun 18, 2011 8:09 am ---- not sure that looks right can you move the metal collar with your fingers it should hardly be able to move
#6: Re: how much movement should there be? Author: Edward, Location: In the garagePosted: Sat Jun 18, 2011 8:20 am ---- Just looked at my old mount and when I remove the metal sleeve, the oval hole is 30mm long.
#7: Re: how much movement should there be? Author: spud_owen, Location: ashby de la zouchPosted: Sat Jun 18, 2011 11:28 am ----
rttam wrote:
not sure that looks right can you move the metal collar with your fingers it should hardly be able to move
yeah i could move it left to right as the pictures, proably about 5mm from the centre each way, also should be metal sleve be wedged in the rubber as i coud take it out very easily?
#8: Re: how much movement should there be? Author: spud_owen, Location: ashby de la zouchPosted: Sat Jun 18, 2011 11:29 am ----
Seabook wrote:
the bottom mount seldom break at all....
i know they dont but just trying to sort the car all the little bits are doing my head in!!
#9: Re: how much movement should there be? Author: spud_owen, Location: ashby de la zouchPosted: Sat Jun 18, 2011 11:31 am ----
Edward wrote:
Just looked at my old mount and when I remove the metal sleeve, the oval hole is 30mm long.
cheers will measure mine if i take it off again, its not a difficult job but you got o undo so many bolts!!!
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [74]:
Visitors: 73
Members: 0
Staff Online Now:
Page Views:
General
