#1: Pug 206 Angel eyes Author: DJ_M4rko, Location: BiH CapljinaPosted: Sun Jun 26, 2011 7:41 am ---- In fact I have a problem with my angel eyes, do not work at all. Do I have to disassemble the overall unit headlight bulb to change 4 or has a different way .. Thanks for your help
#2: Re: Pug 206 Angel eyes Author: Lee, Location: EnglandPosted: Sun Jun 26, 2011 7:54 am ---- Have you wired them up?
#3: Re: Pug 206 Angel eyes Author: DJ_M4rko, Location: BiH CapljinaPosted: Sun Jun 26, 2011 8:02 am ---- Of course, I know only that no other lamp is not working
#4: Re: Pug 206 Angel eyes Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Sun Jun 26, 2011 8:05 am ---- do you have to earth them??
(ie not earthed on original loom)
#5: Re: Pug 206 Angel eyes Author: DJ_M4rko, Location: BiH CapljinaPosted: Sun Jun 26, 2011 12:01 pm ---- Are connected to the position of the lights ... mean plus and minus
#6: Re: Pug 206 Angel eyes Author: Lee, Location: EnglandPosted: Sun Jun 26, 2011 12:09 pm ---- If it is all wired up correctly, and there is voltage going to the LED's, and there is earthing. Then it probably will need the LED's replacing, which means heating them up and splitting them apart.
I'm very surprised that all 4 rings have blown at the same time though
#7: Re: Pug 206 Angel eyes Author: DJ_M4rko, Location: BiH CapljinaPosted: Sun Jun 26, 2011 12:34 pm ---- for a long time does not work, I am most interested in whether I have to disassemble the whole headlight to replace four light bulbs. (I am thinking that keeps them warm hair dryer and disassembled)
#8: Re: Pug 206 Angel eyes Author: Lee, Location: EnglandPosted: Sun Jun 26, 2011 12:43 pm ---- Yes you do. Heat them up in the oven or with a hair dryer or heat gun, then you split them in half
#9: Re: Pug 206 Angel eyes Author: DJ_M4rko, Location: BiH CapljinaPosted: Sun Jun 26, 2011 12:45 pm ---- Thank you very much for your help
#10: Re: Pug 206 Angel eyes Author: Lee, Location: EnglandPosted: Sun Jun 26, 2011 12:50 pm ---- If you put them in the oven, 100oC for about 20 minutes
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [325]:
Visitors: 324
Members: 0
Staff Online Now:
Page Views:
General
