#16: Re: Removing 180 Seat Airbag Connector Author: LeeThr, Location: North West WalesPosted: Tue Feb 14, 2012 8:10 pm ----
sambelsher wrote:
hi i have a simuler problem i remover the standered seats and put some recoro seats in my 206 GTI and i am getting airbag fault is there any way i can join the cables together to make the car think the airbags are still there to get rid of the airbag fault if so what cables do i join together there is 3 cables going to to the plug
Stick a resistor of the correct value accross the terminals. Or get the airbag ECU disabled.
#17: Re: Removing 180 Seat Airbag Connector Author: iainlovatt, Posted: Wed Feb 15, 2012 3:42 am ----
HFStuart wrote:
Turn the connector over from how it's shown in your photo. There's a little green tab that you'll be able to push down and it looks like that frees it - but it doesn't
You need to get a slim screwdriver and slide it in just beneath thab tab - give it a wiggle and the connector can be pulled apart. Took me a while to work it out and I've done a few over the years.
Edit: Camera found - Like this mating half missing but you get the idea.
thats how i got it to come away too! great minds think alike!
Stuart
#18: Re: Removing 180 Seat Airbag Connector Author: sambelsher, Location: deal. kentPosted: Wed Feb 15, 2012 5:36 am ---- what resistor do i need to use and what 2 cables do i put it across cuz there is 3 cables
#19: Re: Removing 180 Seat Airbag Connector Author: MrBSI, Location: What's it to you? ? ?Posted: Wed Feb 15, 2012 11:16 am ----
sambelsher wrote:
what resistor do i need to use and what 2 cables do i put it across cuz there is 3 cables
MOT FAIL
Is your insurance company happy / you bothered to tell them you have removed factory fitted safety equipment from the car?
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy