#16: Re: bought a chip to fit on maf/iat sensor? where is it? Author: V9977, Location: Athens, GreecePosted: Sun Jul 10, 2011 3:07 pm ----
drewsta82 wrote:
ure not tellin because u dont know??
It's the Intake Air Temperature sensor fitted on the throttle body.
However, he is not telling you because its a pointless hack that makes
the ECU think there is a different temperature than the actual value
which changes the mixture parameters etc.
It is widely accepted as a waste of money and fuel for little if any gains
performance-wise. If you want to improve things with modifications etc,
try asking around here of tried and tested ways that people would recomend.
Best of luck.
#17: Re: bought a chip to fit on maf/iat sensor? where is it? Author: furryhobnob, Location: NuneatonPosted: Sun Jul 10, 2011 3:09 pm ----
Mikey2uk wrote:
furryhobnob wrote:
Mikey I bet you £20 it is exactly what were thinking lol
But you dont know and no else does until the OP says, so jumping on the band wagon and telling them they have been shafted is a bit wrong considering they are a new member as well.
And we wonder why new members dont stay around that long if this is the sort of response they get.........
To be fair his first post was asking for a iat sensor location so he can fit something he bought off eBay, what's the betting he doesn't come on for another 6 months until he needs to ask where exactly you put the fuel saving magnets as his mpg hasn't changed! If I'm wrong welcome to the op
#18: Re: bought a chip to fit on maf/iat sensor? where is it? Author: Jordan_xsi, Location: IpswichPosted: Sun Jul 10, 2011 3:14 pm ---- Welcome to info OP....
#19: Re: bought a chip to fit on maf/iat sensor? where is it? Author: drewsta82, Location: west bromPosted: Sun Jul 10, 2011 3:14 pm ---- 2bh i had my doubts about it and if i wanted it fitted it would be on 6 months ago! but i just thought i would try and see were i would find it for future refrences. thanks for answerin
#20: Re: bought a chip to fit on maf/iat sensor? where is it? Author: Abzynthe, Posted: Sun Jul 10, 2011 3:58 pm ---- Welcome to
#21: Re: bought a chip to fit on maf/iat sensor? where is it? Author: macca1411, Location: Westhoughton, LancashirePosted: Sun Jul 10, 2011 3:59 pm ---- Whats the point, it could be classed as an illegal engine modification and fail the MOT next year if VOSA have their way.
I was thinking about fitting a kiddies windmill on my roof and then the spinning motion would add extra power (in the same fashion a jet engine would) and increase economy. It might even work better than the resistor.
Edit. just thought, the extra weight might be an issue, sod it i'll just change my exhaust layout and see if it helps me corner faster.
#22: Re: bought a chip to fit on maf/iat sensor? where is it? Author: Lee, Location: EnglandPosted: Sun Jul 10, 2011 4:01 pm ---- These are the biggest load of s**t ever. They blank off the Air flow sensor to try and full the car into overfuelling. Whereas in reality they do jack s**t except turn on the EML and sometimes put the car in limp mode.
#23: Re: bought a chip to fit on maf/iat sensor? where is it? Author: Ash, Location: Running from Ant and Lee and Adam...........Posted: Sun Jul 10, 2011 4:04 pm ----
macca1411 wrote:
Just thought, the extra weight might be an issue, sod it i'll just change my exhaust layout and see if it helps me corner faster.
Fit a blown defuser
#24: Re: bought a chip to fit on maf/iat sensor? where is it? Author: nakednakeddave, Location: aberdeenPosted: Sun Jul 10, 2011 4:11 pm ----
Ash wrote:
macca1411 wrote:
Just thought, the extra weight might be an issue, sod it i'll just change my exhaust layout and see if it helps me corner faster.
Fit a blown defuser
if its not good enough for f1 anymore, its not good enough for my car :L
#25: Re: bought a chip to fit on maf/iat sensor? where is it? Author: sillyhilly, Location: The Mean Streets of CoventryPosted: Sun Jul 10, 2011 5:14 pm ---- This must be a troll?! You will not win you un-original wannabe!
#26: Re: bought a chip to fit on maf/iat sensor? where is it? Author: Rob2859, Location: HalifaxPosted: Sun Jul 10, 2011 7:02 pm ---- Some stupid plank at my mates college has one on his corsa is stinks of fuel. He also Has a ram air intake with no air filter just a straight pipe to the TB. Like a henry.
#27: Re: bought a chip to fit on maf/iat sensor? where is it? Author: macj, Location: EssexPosted: Sun Jul 10, 2011 11:23 pm ----
drewsta82 wrote:
2bh i had my doubts about it and if i wanted it fitted it would be on 6 months ago! but i just thought i would try and see were i would find it for future refrences. thanks for answerin
Welcome to info.... Come and see me if you want to extract some resonable power from your GTi. I can pop bits on ebay if it makes it easier....
#28: Re: bought a chip to fit on maf/iat sensor? where is it? Author: Fil140, Posted: Wed Apr 02, 2014 9:56 am ---- Haaaa i searched,i found and i slowly walked away....
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [169]:
Visitors: 168
Members: 0
Staff Online Now:
Page Views:
General
Welcome to info OP....
