#1: few little things Author: 20619d, Location: barnstaplePosted: Mon Jul 11, 2011 1:40 pm ---- got board of the front badge and didnt think looked good on car no more.
here old one
here the one i sprayed today(no clear coat yet)
was looking at car today and not likeing the black wheels any more so was thinking strip all paint off them sand them down and then polish them.
i tryed it on a old steel wheel to see how good i could do it before i start on alloys.
#2: Re: few little things Author: eddrj, Location: BerkshirePosted: Mon Jul 11, 2011 1:42 pm ---- looks good , better than old one.
#3: Re: few little things Author: MrZiggerz, Location: Milton KeynesPosted: Mon Jul 11, 2011 1:43 pm ---- Much better than the old one. You need a better camera
#4: Re: few little things Author: rttam, Location: devonPosted: Mon Jul 11, 2011 1:44 pm ---- would be very wary of doing the alloys like that mate will take hours and hours to get them to look good polished an will need cleaning every day to stop them corroding :S
would look sweet if you pulled it off though thought about doing it to the set of sciroccos iv got lying around but they are too small for the 180 really
#5: Re: few little things Author: 20619d, Location: barnstaplePosted: Mon Jul 11, 2011 1:47 pm ----
rttam wrote:
would be very wary of doing the alloys like that mate will take hours and hours to get them to look good polished an will need cleaning every day to stop them corroding :S
would look sweet if you pulled it off though thought about doing it to the set of sciroccos iv got lying around but they are too small for the 180 really
thinking of putting clear coat on them so dont rust. only doing it as cant get new rims so wnt make them look better
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy