#1: noisey tappets? Author: dumdum0910, Location: letchworthPosted: Fri Jul 15, 2011 12:54 pm ---- since ive replaced the headgasket on my 206 i keep getting a loud ticking once the engine has warmed up. i have checked the gaps on all the tappets about 3 times in the last 2 weeks but there still noisey. what else could the problem be as its getting rather annoying ?
its still running fine and no problems
its the 1.1 tu1pj engine with 60k on the clock its also had a recent service
#2: Re: noisey tappets? Author: Seabook, Posted: Fri Jul 15, 2011 12:55 pm ---- if changing the oil don't help then that means you will need new lifters
#3: Re: noisey tappets? Author: macj, Location: EssexPosted: Fri Jul 15, 2011 12:59 pm ---- give it a Forte engine flush.... you have some hydraulic lifter issues
#4: Re: noisey tappets? Author: imjeeves, Location: Glasgow / WellingPosted: Fri Jul 15, 2011 1:09 pm ---- I had this and it was the cambelt crankshaft bolt was loose. Make sure its 100% tight
#5: Re: noisey tappets? Author: Daza, Location: Benfleet, EssexPosted: Fri Jul 15, 2011 1:14 pm ---- I get this too however mine is noisey when the engine first starts then when it warms up the noise gets quiter! also had full service about 1 month ago
#6: Re: noisey tappets? Author: LeeThr, Location: North West WalesPosted: Fri Jul 15, 2011 4:23 pm ---- Mine seems to start ticking when its stood idling for more than 10 seconds e.g when sat at trafic lights when its warm. Not too sure what it is.
#7: Re: noisey tappets? Author: xXx_LIL_P_xXx, Location: Chatham, KentPosted: Fri Jul 15, 2011 5:00 pm ---- i have the same problem bfs dad has just changed the head and done a service and since then its very tappy and exhaust sounds very raspy! x
#8: Re: noisey tappets? Author: dumdum0910, Location: letchworthPosted: Sat Jul 16, 2011 2:55 am ---- also i had a look on the internet and found the guide on adjusting them is cylinder 1 gearbox side or pulley side ?
#9: Re: noisey tappets? Author: Seabook, Posted: Sat Jul 16, 2011 3:02 am ---- don't think you can adjust the lifters are they are self adjusted
#10: Re: noisey tappets? Author: dumdum0910, Location: letchworthPosted: Sat Jul 16, 2011 3:21 am ---- nope there not self adjusting .
#11: Re: noisey tappets? Author: Seabook, Posted: Sat Jul 16, 2011 3:37 am ---- gearbox end
#12: Re: noisey tappets? Author: dumdum0910, Location: letchworthPosted: Sat Jul 16, 2011 3:39 am ---- ok i also done the tappets on my mates saxo 1.1 and it came out worse with the info i had
valve clearances are- 0.20mm for all the inlet valves and 0.40mm for the exhaust valves
No.1 exaust valve fully open - adjust No.3 inlet and No.4 exhaust.
No.3 exhaust vale fully open - adjust No4 inlet and No2 exhaust.
No4 exhaust open- adjust No2 inlet and No1 exhaust.
No2 exhaust open - adjust No1 inlet and No3 exhaust.
#13: Re: noisey tappets? Author: dumdum0910, Location: letchworthPosted: Sat Jul 16, 2011 3:40 am ---- some people are also saying the engine has to be hot? is this right?
#14: Re: noisey tappets? Author: GingeWrexham, Location: WrexhamPosted: Tue Jul 19, 2011 6:08 am ---- I had same problem for months, tried engine flush, tappet lifter the lot. and it just ended up bein a loose spark plug ha
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17134
Online Now [634]:
Visitors: 632
Members: 1
Staff Online Now:
Page Views:
General
