#1: PUG 206 HDI Engine Cover Author: Janetsman, Location: LeicesterPosted: Sat Jul 16, 2011 1:28 am ---- Can anybody give me any information on how to re fit the engine cover on
my 2,0 HDI. I believe the fastenings have broken and I need a new bolt set. Are there points on the engine block that these bolts fit into?
Any useful information would be appreciated.
#2: Re: PUG 206 HDI Engine Cover Author: kieron, Location: in the housePosted: Sat Jul 16, 2011 1:33 am ---- clips
You will need them buddy
#3: Re: PUG 206 HDI Engine Cover Author: Janetsman, Location: LeicesterPosted: Sat Jul 16, 2011 1:49 am ---- OK Thanks
#4: Re: PUG 206 HDI Engine Cover Author: DREWDEN, Location: huddersfieldPosted: Sat Jul 16, 2011 1:57 am ---- Another anoying fault with the car. Known issue, last about ayear if lucky.
Put cover on, should line up with 4 holes.
put bolts and washers in mine 8mm i think, solved problem.
#5: Re: PUG 206 HDI Engine Cover Author: eddrj, Location: BerkshirePosted: Sat Jul 16, 2011 2:36 am ---- is easy to do , really annoying i had to keep doing it often on my old hdi , so much that i got fed up and just took it off.
#6: Re: PUG 206 HDI Engine Cover Author: DREWDEN, Location: huddersfieldPosted: Sat Jul 16, 2011 11:01 am ---- Just read your question again, 4 bolts that your asking where they go in the engine bay need to be removed, as they often come away from the rubber.
#7: Re: PUG 206 HDI Engine Cover Author: Janetsman, Location: LeicesterPosted: Sun Jul 17, 2011 5:30 am ---- Yes you was correct they had snapped off and the bolts were still in the block. I think bolts and washers are a good alternative just need to find out what the thread size is and whether it is metric.
#8: Re: PUG 206 HDI Engine Cover Author: DREWDEN, Location: huddersfieldPosted: Sun Jul 17, 2011 8:45 am ---- 6mm by 50mm long, just take one of the bolts with you (wilkinsons) have a good selection of small packets.
On the inside of the cover put a washer, then a 25mm spacer, followed by washer,nut(finger tight) obviously a washer on the outside of the cover.
Works a treat, problem gone forever.
Just wondering, anybody know what function the cover does, the obvious i believe to keep heat to engine in, noise, protection.
#9: Re: PUG 206 HDI Engine Cover Author: Janetsman, Location: LeicesterPosted: Sun Aug 28, 2011 2:03 am ---- Hi Drewden not been on here for a while and just seen your message. This seems a really good alternative can you also buy the 25mm spacers from Wilkinsons?
#10: Re: PUG 206 HDI Engine Cover Author: Lecktorious, Location: ScotlandPosted: Sun Aug 28, 2011 7:28 am ---- Peugeot released a revised set of clips as the old version were prone to breaking.
Go and visit your local Dealership.
#11: Re: PUG 206 HDI Engine Cover Author: MrBSI, Location: What's it to you? ? ?Posted: Sun Aug 28, 2011 8:33 am ----
G. wrote:
Peugeot released a revised set of clips as the old version were prone to breaking.
Go and visit your local Dealership.
Wasting your time, posted this info several times before, no f****r listens
#12: Re: PUG 206 HDI Engine Cover Author: Lecktorious, Location: ScotlandPosted: Sun Aug 28, 2011 8:35 am ----
MrBSI wrote:
G. wrote:
Peugeot released a revised set of clips as the old version were prone to breaking.
Go and visit your local Dealership.
Wasting your time, posted this info several times before, no f****r listens
Thought as such, would have thought the search function had been disabled
#13: Re: PUG 206 HDI Engine Cover Author: MrBSI, Location: What's it to you? ? ?Posted: Sun Aug 28, 2011 8:38 am ----
G. wrote:
MrBSI wrote:
G. wrote:
Peugeot released a revised set of clips as the old version were prone to breaking.
Go and visit your local Dealership.
Wasting your time, posted this info several times before, no f****r listens
Thought as such, would have thought the search function had been disabled
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [151]:
Visitors: 150
Members: 0
Staff Online Now:
Page Views:
General
