#1: Phase 2 washer jets blocked Author: hobnob48, Posted: Tue Jul 19, 2011 9:17 am ---- Right lets see if anyone can help. I have some ph2 washer jets and somehow they have got blocked up and neither of the spray water at my windscreen.
The pump works as I have taken them out and when washers are used the pump kicks in and pushes water out of the open pipe.
Any suggestions on how I can clean them out?
Cheers,
Jamie
#2: Re: Phase 2 washer jets blocked Author: MrrNoName, Location: UKPosted: Tue Jul 19, 2011 9:18 am ---- pin head and a lot of blowing + effort lol
#3: Re: Phase 2 washer jets blocked Author: Harty, Location: West LothianPosted: Tue Jul 19, 2011 9:19 am ---- i used a needle just big enough to go down the washer jets and gave them a good scrape from the inside
HTH
#4: Re: Phase 2 washer jets blocked Author: iainlovatt, Posted: Tue Jul 19, 2011 9:20 am ---- needle is the only way!
#5: Re: Phase 2 washer jets blocked Author: hobnob48, Posted: Tue Jul 19, 2011 9:24 am ---- Cheers lads. Was hoping I didnt have to do that Knowing me I am going to break them but oh well. Will give it a go when I get home
#6: Re: Phase 2 washer jets blocked Author: MrrNoName, Location: UKPosted: Tue Jul 19, 2011 9:27 am ---- if you do just get another set lol. its not a big deal
#7: Re: Phase 2 washer jets blocked Author: JE_180, Location: WiltshirePosted: Tue Jul 19, 2011 9:27 am ---- Just be gentle lol
#8: Re: Phase 2 washer jets blocked Author: hobnob48, Posted: Tue Jul 19, 2011 9:31 am ---- Thats true I could just get new ones. Gentle??? Why would I want to do that! lol
#9: Re: Phase 2 washer jets blocked Author: jdavies3, Location: englandPosted: Tue Jul 19, 2011 9:45 am ---- local scrappy works a treat !
#10: Re: Phase 2 washer jets blocked Author: Jay794, Location: Sheffield/Chesterfield/DronfieldPosted: Tue Jul 19, 2011 10:20 am ---- Needle/Ear Ring and compressed air
#11: Re: Phase 2 washer jets blocked Author: kieron, Location: in the housePosted: Tue Jul 19, 2011 10:21 am ---- When mine blocked i still couldnt get them to work will the needle trick so i left them in a cup of limescale remover over night and it did the trick
#12: Re: Phase 2 washer jets blocked Author: Seabook, Posted: Tue Jul 19, 2011 10:31 am ---- replace it with a phase 1 jet.
#15: Re: Phase 2 washer jets blocked Author: mattievrs, Location: LeicesterPosted: Tue Jul 19, 2011 10:47 am ---- stick them in some boiling water and boil for 10 mins. Itll clear the polish/wax out of them.
#16: Re: Phase 2 washer jets blocked Author: Jamie1337, Location: Dorchester, DorsetPosted: Tue Jul 19, 2011 11:15 am ---- Or soak them in vinegar overnight, that'll get rid of any limescale build up.
Or soak them in vinegar overnight, that'll get rid of any limescale build up.
to be fair, limescale should not be found in the washer system if you are using proper stuff
#18: Re: Phase 2 washer jets blocked Author: hobnob48, Posted: Wed Jul 20, 2011 3:01 am ---- Its not limescale. Its my own fault for being lazy and got polish on them :(. I will do the boiling water trick when I get home from work. Cheers for the advice people.
#19: Re: Phase 2 washer jets blocked Author: abs06, Location: East SussexPosted: Wed Jul 20, 2011 5:01 am ---- mine got blocked a white ago, i used the hot water trick, and also used the shorter pipe to blow watert though to make sure they was working before fitting again.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [39]:
Visitors: 38
Members: 0
Staff Online Now:
Page Views:
General
Knowing me I am going to break them but oh well. Will give it a go when I get home
