#1: My new Mini Moto project.. (For sh*ts and giggles) Author: xspongerx, Location: Newquay, CornwallPosted: Thu Jul 21, 2011 4:39 pm ---- Hi guys,
I have been so bored and car parts are too expensive when you're 17 and a KP...
So, I wanted a small project that doesnt cost to much and is a bit of fun..
Went to some pikeys house today to look at some mini motos and he had one bike and a load of spares left..
He said give me £10 for the lot and take it away.
Here it is, I will be doing this over the next few weeks so watch this space if you are interested, if you're not then hay ho
How it started off:
Starting to strip down:
Was hard to lift this huge block out by myself
Plans are:
Full engine rebuild.
Race exhaust.
Air filter
Upjet carb
New Spark plug
Source some fairings.
Find a colour scheme/design.
Wheel refurb.
Paint chasis.
New pads and disks.
Will update regularly
**update 22/07/2011**[u]
Made the most of the sun today and got a few bits cleaned and painted..
Also I have ordered a new pull start and flywheel
Here is the engine, degreased and stripped.
Dirty old clutch bell
Stripped...
Primed and painted:
Bike frame sanded down..
And primed:
Now my wheels ready for refurb
**update 01/08/2011**
Painted frame:
Painted exhaust:
Repairing the fairings
Fibre glassed behind the holes...
A lot of filler in the gaps
And the finished product! (Not painted yet!)
And the engine is complete:
I re-assembled the mini moto to have a test run of the engine and it was running terrible...
Stripped the engine and found out one of the piston rings have snapped (Not damaged anything else luckily)
So waiting for the posty now to deliver my new ones and ready to run again!
Its super fast! Last edited by xspongerx on Mon Aug 01, 2011 5:47 pm; edited 5 times in total
#2: Re: My new Mini toy project.. (For sh*ts and giggles) Author: Abzynthe, Posted: Thu Jul 21, 2011 4:40 pm ---- Looks interesting
#3: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: Kersh, Location: Bridgnorth, Nr WolverhamptonPosted: Thu Jul 21, 2011 4:52 pm ---- Yesss I like it! Does the engine run alright? What are your plans?
#4: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: Lee, Location: EnglandPosted: Thu Jul 21, 2011 4:57 pm ---- I miss mine
Paid £340 for my Honda Repsol Racing replica. Was fast as f***, got clocked doing just under 60mph, which is seriously fast when you're only an inch off the floor!
#5: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: drunknmunky, Location: Blackburn and CatterickPosted: Thu Jul 21, 2011 5:03 pm ---- Do the whole thing matt black will look the s**t man
#6: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: xspongerx, Location: Newquay, CornwallPosted: Thu Jul 21, 2011 5:04 pm ----
Kersh wrote:
Yesss I like it! Does the engine run alright? What are your plans?
Not sure yet, Have two engines though!!
Plans are:
Full engine rebuild.
Race exhaust.
Air filter
Upjet carb
New Spark plug
Source some fairings.
Find a colour scheme/design.
Wheel refurb.
Paint chasis.
New pads and disks.
Thats all I can think of so far. I found out its the lucky 7 model which is slightly bigger and faster with a removable swing arm..
#7: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: xspongerx, Location: Newquay, CornwallPosted: Thu Jul 21, 2011 5:05 pm ----
drunknmunky wrote:
Do the whole thing matt black will look the s**t man
I was thinking that.. With something simple like bright green rim tape...
I have so many possibilities.
#8: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: Razpulsedj, Location: Partying with the Info ShufflersPosted: Thu Jul 21, 2011 5:05 pm ---- Now thats what im talking bout Awesome project dude
Carbon wrap ftw
#9: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: Lee, Location: EnglandPosted: Thu Jul 21, 2011 5:05 pm ---- Is it the 43 or 49cc?
Get full fairing rather than w**ky half
#10: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: xspongerx, Location: Newquay, CornwallPosted: Thu Jul 21, 2011 5:06 pm ----
Razpulsedj wrote:
Now thats what im talking bout Awesome project dude
Carbon wrap ftw
I have so many ideas, its so hard to think... Carbon was my first idea
#11: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: xspongerx, Location: Newquay, CornwallPosted: Thu Jul 21, 2011 5:07 pm ----
Lee wrote:
Is it the 43 or 49cc?
Get full fairing rather than w**ky half
Its the 49cc same as the repsol you had.. I am trying to source the whole fairing now.
I have found a new set for £48 but thats steeeep
#12: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: Lee, Location: EnglandPosted: Thu Jul 21, 2011 5:15 pm ---- I had the red, white and purple one
Stickered it up, and fitted LED's to it too
Was mint lol
#13: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: xspongerx, Location: Newquay, CornwallPosted: Thu Jul 21, 2011 5:23 pm ----
Lee wrote:
I had the red, white and purple one
Stickered it up, and fitted LED's to it too
Was mint lol
I think the guy who had it before me tried to fit LED's.. There are holes drilled everywhere
#14: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: Lee, Location: EnglandPosted: Thu Jul 21, 2011 5:29 pm ---- I fitted them to the front and rear, so they were like normal lights
Rear ones were flashers tho, so used to do patterns
Used to love flying about the streets on it
Sold it tho because the engine was too powerful and used to rip the rear wheel off all the time. Shreaded the bolts on the rear sprocket
Would have ended up killing myself
#15: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: Ali_H, Location: Chichester, SussexPosted: Thu Jul 21, 2011 5:32 pm ---- I think green with a gold flip. Would look cool if you could see the gold.
#16: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: KARIM, Location: LondonPosted: Thu Jul 21, 2011 5:33 pm ---- Looks like a fun project would love to find one myself only problem would be wouldnt no where to ride it..
But best of luck with it mate and hope it turns out as you wish
#17: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: Lee, Location: EnglandPosted: Thu Jul 21, 2011 5:36 pm ---- The roads? and streets? carparks?
#18: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: tomd0801754, Location: MoscowPosted: Thu Jul 21, 2011 5:37 pm ----
Ali_H wrote:
I think green with a gold flip. Would look cool if you could see the gold.
I reckon he wraps it in wallpaper.
#19: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: xspongerx, Location: Newquay, CornwallPosted: Thu Jul 21, 2011 5:38 pm ----
tomd0801754 wrote:
Ali_H wrote:
I think green with a gold flip. Would look cool if you could see the gold.
I reckon he wraps it in wallpaper.
Lol what?
#20: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: KARIM, Location: LondonPosted: Thu Jul 21, 2011 5:40 pm ---- lol kool my bad... Thought theyre not road legal but my mistake... Still best of luck with it
#21: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: xspongerx, Location: Newquay, CornwallPosted: Thu Jul 21, 2011 5:42 pm ----
KARIM wrote:
lol kool my bad... Thought theyre not road legal but my mistake... Still best of luck with it
They are not Just ride them out the way and thanks
#22: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: Razpulsedj, Location: Partying with the Info ShufflersPosted: Thu Jul 21, 2011 5:47 pm ----
Ali_H wrote:
I think green with a gold flip. Would look cool if you could see the gold.
Only works with a red tree enviroment though Ali, pmsl when someone mentions that again
#23: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: Howey, Location: Kings LynnPosted: Thu Jul 21, 2011 7:08 pm ----
tomd0801754 wrote:
Ali_H wrote:
I think green with a gold flip. Would look cool if you could see the gold.
I reckon he wraps it in wallpaper.
#24: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: drunknmunky, Location: Blackburn and CatterickPosted: Thu Jul 21, 2011 7:10 pm ----
tomd0801754 wrote:
Ali_H wrote:
I think green with a gold flip. Would look cool if you could see the gold.
I reckon he wraps it in wallpaper.
Fair play to you trying to sell your roll of feature wall wallpaper still but i dont think your having much luck you cant even give it away
#25: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: kieron, Location: in the housePosted: Fri Jul 22, 2011 1:14 am ---- How to find if its 49 0r 43 on the barrel they will be a large fin coming of it near the exhaust that will be a 50 if so , The engine is what they call a CAG engine and is Chinese they are only 40 quid brand new on ebay so not worth rebuilding
Lee .. the honda repsol you had was probably a blasta engine and they are RAPID!
#26: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: MrrNoName, Location: UKPosted: Fri Jul 22, 2011 6:49 am ---- there's nowhere by me where I could ride it without getting stopped after like 2 minutes lol, they are awsome though, keep us updated with pics!
#27: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: JamieM, Posted: Fri Jul 22, 2011 6:56 am ---- I have a mini dirt bike that I haven't been able to ride much due to police.
Well and the fact that it sat around for sloop long I can't start it lol
#28: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: Lee, Location: EnglandPosted: Fri Jul 22, 2011 1:41 pm ----
kieron wrote:
How to find if its 49 0r 43 on the barrel they will be a large fin coming of it near the exhaust that will be a 50 if so , The engine is what they call a CAG engine and is Chinese they are only 40 quid brand new on ebay so not worth rebuilding
Lee .. the honda repsol you had was probably a blasta engine and they are RAPID!
It was seriously fast. It went thru brakes like there were no tomorrow.
I had that, and my mates had 43cc Go-Peds and I only had to tickle the revs to keep up with them.
#29: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: kieron, Location: in the housePosted: Fri Jul 22, 2011 2:55 pm ----
Lee wrote:
kieron wrote:
How to find if its 49 0r 43 on the barrel they will be a large fin coming of it near the exhaust that will be a 50 if so , The engine is what they call a CAG engine and is Chinese they are only 40 quid brand new on ebay so not worth rebuilding
Lee .. the honda repsol you had was probably a blasta engine and they are RAPID!
It was seriously fast. It went thru brakes like there were no tomorrow.
I had that, and my mates had 43cc Go-Peds and I only had to tickle the revs to keep up with them.
i know! my brother had one (gti180boy) and he was going up our road at about 40mph in a vest and shorts and the handle bars fell off did some damage but was quite funny at the time
#30: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: Lee, Location: EnglandPosted: Fri Jul 22, 2011 2:58 pm ---- I s**t myself the first time the rear wheel come off....was flying round a corner, it come off and I missed a car by about an inch
#31: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: xspongerx, Location: Newquay, CornwallPosted: Fri Jul 22, 2011 3:56 pm ---- updated!
#32: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: xspongerx, Location: Newquay, CornwallPosted: Mon Aug 01, 2011 5:48 pm ---- another update!!! *bump*
#33: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: Kersh, Location: Bridgnorth, Nr WolverhamptonPosted: Tue Aug 02, 2011 1:32 am ---- what did you paint the exhaust in?? because its going to quickly burn away and look crap and smell horrible when it gets hot if its not special stuff
other than that its looking good!!
#34: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: xspongerx, Location: Newquay, CornwallPosted: Tue Aug 02, 2011 1:41 am ----
Kersh wrote:
what did you paint the exhaust in?? because its going to quickly burn away and look crap and smell horrible when it gets hot if its not special stuff
other than that its looking good!!
dont worry, its high temp paint
#35: Re: My new Mini Moto project.. (For sh*ts and giggles) Author: bisphenol-a, Location: AntarcticaPosted: Sun Aug 14, 2011 9:34 pm ---- i like this project alot
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy