#1: Aero Flat Wiper Blades Author: Tam80, Location: Dundee/MotherwellPosted: Wed Aug 03, 2011 6:11 am ---- Could Some Kind Soul Post Me An Ebay Linky For Good Quality Flat Aero Blades For My 99 GTI Plz ?
Just Got Pair I Ordered Yesterday...Quality Is F****** Crap...
Big Wiper Doin A Tad Juddering...Small Blade Aint Even Sitting Flush On Screen...Juddering All The Time...Hardly Hitting The Screen
Bought A Pair Before For My Vectra..But Cant Remember Seller..They Were Good
#2: Re: Aero Flat Wiper Blades Author: drunknmunky, Location: Blackburn and CatterickPosted: Wed Aug 03, 2011 6:12 am ---- Bosch retro fit aero twins
#3: Re: Aero Flat Wiper Blades Author: Tam80, Location: Dundee/MotherwellPosted: Wed Aug 03, 2011 6:30 am ----
drunknmunky wrote:
Bosch retro fit aero twins
Cool Cheers Mate...Same Seller Has Them So Wait To See What He Says
#4: Re: Aero Flat Wiper Blades Author: drunknmunky, Location: Blackburn and CatterickPosted: Wed Aug 03, 2011 6:33 am ---- just one thing though u might not get the driver side one to sit totally flush they have a bit of overhang but it doesnt make them judder or anything and i have found them to be good for me
#5: Re: Aero Flat Wiper Blades Author: brimbo, Location: South ShieldsPosted: Wed Aug 03, 2011 6:55 am ---- www.amazon.co.uk/gp/pr...ss_product www.amazon.co.uk/gp/pr...ss_product
which ever fits yours best,
i just purchased the 21" x2 set, waiting for them to come in the mail now..
#6: Re: Aero Flat Wiper Blades Author: Ash, Location: Running from Ant and Lee and Adam...........Posted: Wed Aug 03, 2011 12:17 pm ---- I have normal wipers and they don't judder..
Could Some Kind Soul Post Me An Ebay Linky For Good Quality Flat Aero Blades For My 99 GTI Plz ?
Just Got Pair I Ordered Yesterday...Quality Is F****** Crap...
Big Wiper Doin A Tad Juddering...Small Blade Aint Even Sitting Flush On Screen...Juddering All The Time...Hardly Hitting The Screen
Bought A Pair Before For My Vectra..But Cant Remember Seller..They Were Good
The usual way to stop wipers juddering assuming of course the blades are in good condition is to twist the steel pivot arm that the wiper blade attaches to so that the blade is exactly 90 degrees to the windscreen.
The juddering is usually caused by the blade wiping edge not flipping over on the change of wiper direction, they should always trail and not lead. I bet the judder only happens in one direction on each blade.
I had the same problem on the big wiper, tried 3 types of brand new blade but all juddered. Wrapped masking tape around the steel arm for protection and used two adjustable spanners to twist the arm until the judder stopped. The reason I used two spanners was so as not to place any strain on the pivot point.
As a guide when viewing wipers from the front of the car, if the judder is when the wipers are sweeping to the right (as mine was) the arm when pivoted away from the windscreen needs tweaking anticlockwise and vice versa if the judder is in the opposite direction. Take care though you will probably only need a very slight adjustment.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17132
Online Now [561]:
Visitors: 560
Members: 0
Staff Online Now:
Page Views:
General
