#1: Replacing Blown Bulbs Author: PaddyC, Location: IrelandPosted: Wed Aug 10, 2011 3:08 am ---- The first bulb that's gone is in the radio display dash, the centre bulb seems to have gone. How do you access the inside to replace the bulbs? (If one's gone, I'll just replace all three for convenience sake!)
The other bulb that's gone is the left hand side of the fan unit. How do I access that to change the bulb? Am I going to have to remove the dash to do it?
For both of these cases, where's the best place to get the replacement bulbs, is it Peugeot themselves or do places like Halfords do them? (It's easier for me to get to Halfords than Peugeot!) Are they cheap enough to buy? Thanks for any help!
#2: Re: Replacing Blown Bulbs Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Wed Aug 10, 2011 3:11 am ---- Pull the hood off the top of the display to gain access to the bulbs on top one.
To get to the heater display bulbs take the top same as above, and then remove centre console.
#3: Re: Replacing Blown Bulbs Author: Harty, Location: West LothianPosted: Wed Aug 10, 2011 3:27 am ---- yeah halfords do the bulbs for them, but i found that the air con control bulbs were harder to get access to as the rods for the circulation and stuff got in the way, i miss climate control.... easy as hell to change the bulbs
#4: Re: Replacing Blown Bulbs Author: PaddyC, Location: IrelandPosted: Wed Aug 10, 2011 3:29 am ---- How does the centre console come out exactly? Do you have to unscrew things or does it pull out or are there clips holding it in place or what?
#5: Re: Replacing Blown Bulbs Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Wed Aug 10, 2011 3:33 am ---- Once you pull the top off, two little torx screw to remove then it pulls off,
Iirc there was a how to on here somewhere.
#6: Re: Replacing Blown Bulbs Author: Harty, Location: West LothianPosted: Wed Aug 10, 2011 3:36 am ---- yeah then i think its 2 torx that hold the heater controls in aswell then just gotta wrestle with the metal rods.
#7: Re: Replacing Blown Bulbs Author: MrBSI, Location: What's it to you? ? ?Posted: Wed Aug 10, 2011 9:54 am ---- Get your torx 20 screwdriver out, the 206 centre console comes apart so easy for replacing blown bulbs.
#8: Re: Replacing Blown Bulbs Author: PaddyC, Location: IrelandPosted: Wed Aug 10, 2011 10:29 am ---- Thanks everyone. Will get a go at this later tonight hopefully. What code do the bulbs have in Halfords to fir for the heaters and display unit?
#9: Re: Replacing Blown Bulbs Author: MrBSI, Location: What's it to you? ? ?Posted: Wed Aug 10, 2011 10:39 am ---- Heater = Peugeot / Citroen part number 6112 56 Bulb including holder £2.20 each
Display = Peugeot / Citroen part number 6112 60 Bulb including holder £3 each
#10: Re: Replacing Blown Bulbs Author: PaddyC, Location: IrelandPosted: Thu Aug 11, 2011 11:10 am ---- Thanks for that. Have ordered them at the local Peugeot dealer and they will contact me when they are in. Checked Halfords but they apparently don't have the lights I require. Thanks all for the help!
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [120]:
Visitors: 119
Members: 0
Staff Online Now:
Page Views:
General
