#1: Fogs not working. Author: QuArTz, Location: South CoastPosted: Fri Sep 02, 2011 3:37 pm ---- I have just bought a 54 plate 206 S, I knew when I bought the car that the fogs were not working as it appeared that water had got into the drivers side fog as there was a lot of corrosion on the lens and the bulb holder/bulb.
I removed the fogs today to spray them and maybe rescue the damaged one but the damaged one is ruined.
Obviously I thought that the fog wasn't working because the bulbs had gone but both bulbs are working fine as I have tested them on a continuity meter.
I have noticed that the front fog symbol on the dash doesn't come on when I twist the stalk, only the rear fog and dash light symbol illuminate.
Have have tested the fuse and that has continuity.
Does anyone have any ideas as to why they might not be working?
Shouldn't the dash light for the front fog come on when I twist the stalk, even if the bulbs had gone?
Any help would be greatly appreciated..
#2: Re: Fogs not working. Author: shell-vt, Location: durhamPosted: Fri Sep 02, 2011 3:41 pm ---- dash light should come on if they work or not..
#3: Re: Fogs not working. Author: MrBSI, Location: What's it to you? ? ?Posted: Fri Sep 02, 2011 3:44 pm ---- Wonder if the front fogs have been turned off in the BSI configuration set up
PM me the VIN & ill see if it left the factory with front fogs.
#4: Re: Fogs not working. Author: jamesmcuk, Posted: Sat Sep 03, 2011 4:09 am ---- check the switch and its connectors
#5: Re: Fogs not working. Author: QuArTz, Location: South CoastPosted: Sat Sep 03, 2011 6:18 am ----
jamesmcuk wrote:
check the switch and its connectors
Which switch? The one on the stalk?
I checked the connectors and there doesn't appear to be any damaged cables or corrosion.
#6: Re: Fogs not working. Author: jamesmcuk, Posted: Sat Sep 03, 2011 6:25 am ----
QuArTz wrote:
jamesmcuk wrote:
check the switch and its connectors
Which switch? The one on the stalk?
Yeah find the connector that runs from it and use a multimeter to check that it operates correctly
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 1
New Yesterday: 0
Overall: 17132
Online Now [52]:
Visitors: 51
Members: 0
Staff Online Now:
Page Views:
General
