#1: ARRAN's Quiksilver - UPDATE with pictures 22/6 Author: ARRAN, Location: WiltshirePosted: Tue Sep 20, 2011 5:17 am ---- Right, I'm going to try and keep this short and sweet. Basically, I'm Arran and this is my 206.
EXTERIOR
- 16" nimrods
- Debadged
- Tinted windows
- Colour coded sport bumpers
- Pearl black morettes with 8000k HID's
- Sport mesh bumper and bonnet grille
- Genuine Peugeot stubby aerial
- Rear M3 style LED lights
- Rear wiper deleted
- Aeroblade wipers
- Private plate, pressed metal
- Peugeot 207 front splitter
- Team Heko wind deflectors
- Rear drums sprayed black
- Crystal side repeaters with Silvatec bulbs
ENGINE
- K&N 57i Induction kit
- Powerflow stainless steel centre section and backbox custom made (no centre silencer)
- Raceland 4-2-1 stainless steel manifold, decat
INTERIOR
- Full GTi180 interior inc. front seats, rear bench, front and rear doorcards and glovebox
- Black suede A, B Pillars and roof lining
- Wrapped black vinyl interior light to match roof and pillars
CHASSIS
- Lowered approx. 90mm on Pro Sport coilovers with helpers removed
- Rear torsion bar approx. 100mm to match
AUDIO
- Custom fiberglass install ported, colour coded to car
- 2 x 450W Fusion subs
- JBL 270W Components (up front)
- 1 x 900W Fusion amp (running subs)
- 1 x 450W Fusion amp (running comps.)
Heres how I bought it:
First of all, I sprayed the badge red and black:
Next, I dewipered it and had a stainless steel powerflow exhaust fitted:
Also, went to Trax and bought a few stickers for the back window, not everyones cuppa tea but I like them
Next I bought a set of angel eyes:
Finally, I had my windows tinted:
Next on this list is to spray my phase 2 boot strip which arrived today, buy a GTi front bumper, looks for some new alloys and finish having it lowered! (Coilovers and rear dampers are fitted, just torsion bar to be adjusted.)
Any ideas are greatly appreciated! Thanks for looking.
NEW IDEAS
New wheels - BBS RS reps with centres in Ford Velvet purple.
SP arches
Roof resprayed gloss black
Roof rack? (Sprayed up with purple bars) Last edited by ARRAN on Sat Jun 22, 2013 8:37 am; edited 10 times in total
#2: Re: ARRAN's Quiksilver - Progress Blog Author: jimjam19927, Location: PortsmouthPosted: Tue Sep 20, 2011 5:28 am ---- mine came with sport bumpers but wernt colour coded :/
#3: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Tue Sep 20, 2011 5:31 am ---- The person who had mine before obviously had a bump, and just put a cheap front bumper on. Its got a sport rear bumper, just a normal front one haha. And someone has colour coded mine themselves, as you can see the paint flaking in some places.
#4: Re: ARRAN's Quiksilver - Progress Blog Author: jimjam19927, Location: PortsmouthPosted: Tue Sep 20, 2011 6:37 am ---- mine dint come with nimmies either! or a spoiler
#5: Re: ARRAN's Quiksilver - Progress Blog Author: drew, Location: leicestershirePosted: Tue Sep 20, 2011 7:23 am ---- I thought the quicksilver model was 16v?
coming along nicely regardless
#6: Re: ARRAN's Quiksilver - Progress Blog Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Tue Sep 20, 2011 7:28 am ----
drew wrote:
I thought the quicksilver model was 16v?
do both
#7: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Sun Sep 25, 2011 3:04 am ---- Had it lowered yesterday, 80mm all round. What does everyone think?
Last edited by ARRAN on Mon Sep 26, 2011 3:31 am; edited 1 time in total
#8: Re: ARRAN's Quiksilver - Progress Blog Author: Harry, Location: StaffordPosted: Sun Sep 25, 2011 3:08 am ---- Bit too low at the back mate compared to the front in my opinion. Looks good though reminds me of my old 1.4, kind of miss it a bit
#9: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Sun Sep 25, 2011 3:11 am ---- yeah i know what you mean mate, it sits real nice in the flesh, but i may have it brought up a bit on the back, not sure yet lol.
#10: Re: ARRAN's Quiksilver - Progress Blog Author: Davezilla, Location: Milton KeynesPosted: Sun Sep 25, 2011 10:10 am ---- nice car looks to low at the back though
#11: Re: ARRAN's Quiksilver - Progress Blog Author: kingsway2468, Location: swanseaPosted: Sun Sep 25, 2011 10:30 am ---- i think it looks ace on the back need to lower front bit more nice tho
#12: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Sun Sep 25, 2011 4:45 pm ---- it won't go any lower on the front :(:(
#13: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Thu Dec 22, 2011 11:00 am ---- Haven't updated this in a while, so here goes. Car looks sh*te in that picture of it lowered, as that was literally 5 minutes after it had been done coilovers have settled a bit more, however still needs to go looooower on the front here are some more pictures
After being made redundant back in September, not alot has been updated really! GTi front bumper should be here after Christmas, as should the bootbuild. And front speakers have been amped. Thats about all I can think of! Cheers for looking
EDIT: I know the wing is the wrong colour. and also, pressed plates are on order
#14: Re: ARRAN's Quiksilver - Progress Blog Author: Addaz, Location: SuffolkPosted: Thu Dec 22, 2011 1:10 pm ---- Looks smexy in the last photo, but needs a bigger drop on the front
Also how are the rear axle bearings? Did you have them replaced?
#15: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Thu Dec 22, 2011 4:42 pm ---- DEFINITELY needs dropping more on the front!
Nope haha, why? Feel okay to me, nothing was wrong when it was done
#16: Re: ARRAN's Quiksilver - Progress Blog Author: Addaz, Location: SuffolkPosted: Thu Dec 22, 2011 4:56 pm ----
ARRAN wrote:
DEFINITELY needs dropping more on the front!
Nope haha, why? Feel okay to me, nothing was wrong when it was done
Just wondering as a drop like that will rape them quite quickly, they are really simple to do if you did the drop the torsion bar method mate
#17: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Fri Feb 10, 2012 4:18 pm ---- Haven't updated this in a while so here goes.
BIG thanks to Addaz for selling me his bootbuild. If anyone is going to buy anything from him I recommend him as a seller, kept in contact with me and delivery was second to none. So big thanks to him
Here are the pictures of his old install in my car
And heres how she sits now:
Not a lot has changed recently, apart from I've sprayed the interior A, B and C pillars black. Due to having a lack of job and funds, it'll be staying like this til I find something However the list keeps getting bigger and more expensive, which is rather depressing.
#18: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Fri Feb 10, 2012 4:25 pm ---- Found a couple more pictures, with my tweeters in and my black pillars, and another "posing" shot with my pressed plates.
#19: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Tue Apr 10, 2012 10:09 am ---- Bit of progress, finally got myself a job so am able to buy a few nice things for the car Heres latest picture; team Heko wind deflectors, rear M3 style lights, and a good clean also, a badgeless front grille which cannot be seen.
Unfortunately my gearbox went last night, so no progress until thats sorted
#20: Re: ARRAN's Quiksilver - Progress Blog Author: LiamGTi180, Location: OxfordPosted: Tue Apr 10, 2012 10:40 am ---- Loving the car mate. Looks good, sorry to hear about the gearbox. Rear M3 lights FTW got them on mine really suit the 206
#21: Re: ARRAN's Quiksilver - Progress Blog Author: DeadEyePaul, Location: Rugby,WarwickshirePosted: Sat Apr 14, 2012 10:22 am ---- wery niiiiice!
#22: Re: ARRAN's Quiksilver - Progress Blog Author: gti_elston, Location: NottzPosted: Sat Apr 14, 2012 1:58 pm ---- Top work mate, looks sweet!
#23: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Sun Apr 15, 2012 1:14 pm ---- Cheers guys, means alot!
#24: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Sat May 05, 2012 12:26 pm ---- Black morettes on:
#25: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Tue Jun 05, 2012 3:48 am ---- Couple of recent pictures, no real updates apart from I've now got SP bumper and bonnet grilles. Hopefully going to remove helpers before FCS, and next on the list is finding a new set of wheels, unsure of what yet.
Picture of the install:
#26: Re: ARRAN's Quiksilver - Progress Blog Author: DeadEyePaul, Location: Rugby,WarwickshirePosted: Tue Jun 05, 2012 10:14 am ---- Yes! I likely very much
#28: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Thu Jun 21, 2012 11:35 am ---- Picture from FCS12, courtesy of Ste.
#29: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Sun Aug 12, 2012 12:14 pm ---- Not many updates lately, running out of ideas! (and funds!)
Bought a 421 manifold, car is now decatted, sounds nice and raspy and few cheeky little pops! Will get a picture up soon. Also bought some JBL components and all new 12awg speaker wiring, which sounds awesome!!
Want a BMC carbon induction kit next, and a Samco hose kit, and some new wheels. Thinking saving hard for some Schmidt Modern Lines and some 195/45/16 slightly stretched over 7.5J, and having back arch lips rolled for some stance.. Any other ideas?
#30: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Wed Aug 29, 2012 9:12 am ---- Recent picture -
#31: Re: ARRAN's Quiksilver - Progress Blog Author: rosewel, Location: Melton MowbrayPosted: Wed Aug 29, 2012 11:38 am ---- It all looks Very apt number plate too! Keep it up
#32: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Tue Sep 11, 2012 4:47 am ---- Cheers buddy! Few more recent ones. Picked up a full 180 interior in good condition, door cards, glove box, passenger and rear seats all in mint condition, slight wear on drivers seat for £150 delived off of eBay.
And a couple of pics from the Forge action day at Castle Coombe with South Hams Hot Hatches, cheers to Rttam for passes!
#33: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Thu Nov 15, 2012 7:48 am ---- Here are some rough ideas for 2013.
New wheels - BBS RS reps with centres in Ford Velvet purple.
SP arches
Roof resprayed gloss black
Roof rack? (Sprayed up with purple bars)
#34: Re: ARRAN's Quiksilver - Progress Blog Author: Addaz, Location: SuffolkPosted: Thu Nov 15, 2012 1:57 pm ---- Roof racks are so gay......
Hence why i have one
#35: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Fri Nov 16, 2012 6:36 am ----
Addaz wrote:
Roof racks are so gay......
Hence why i have one
Haha
I'm toying with the idea.. not sure yet.
#36: Re: ARRAN's Quiksilver - Progress Blog Author: nonamecc79, Location: londonPosted: Fri Nov 16, 2012 8:53 am ---- Looks like a GTi mate, really good work!! Loving the boot build, must sound mad when you're pumping it.
#37: Re: ARRAN's Quiksilver - Progress Blog Author: ARRAN, Location: WiltshirePosted: Sat Nov 17, 2012 7:00 am ----
nonamecc79 wrote:
Looks like a GTi mate, really good work!! Loving the boot build, must sound mad when you're pumping it.
Cheers for the positive comment fella!
Yeah sounds real good, sometime in the new year I'm hoping to go full JBL; much bigger and much louder.
#38: Re: ARRAN's Quiksilver - Euro Project for 2013. Author: ARRAN, Location: WiltshirePosted: Wed Jan 09, 2013 9:07 am ---- not updated this a while so heres a picture from a local meet.
any guys from the south west area, moreso the swindon area, check out swindon street cruise on facebook. and up and coming club who have done well, and would be great to see some info member attend!
anyway, provisional plans are as follows:
- rota gt3's, 16x7J, polished lips, red centres..
- additional parts sprayed red, eg. badge etc etc..
opinions?????
#39: Re: ARRAN's Quiksilver - Euro Project for 2013. Author: spike_202, Location: West midsPosted: Sun Jan 20, 2013 7:12 am ---- Nice car but needs raising at the back IMO to make it look level.
#40: Re: ARRAN's Quiksilver - Euro Project for 2013. Author: Goldin, Location: Pula , CroatiaPosted: Sun Jan 20, 2013 9:52 am ----
spike_202 wrote:
Nice car but needs raising at the back IMO to make it look level.
I agre, maybe just 1-2 cm, because like this looks wrong.
#41: Re: ARRAN's Quiksilver - UPDATES 3/6/13 Author: ARRAN, Location: WiltshirePosted: Mon Jun 03, 2013 11:19 am ---- Havent updated this in a while, a few things have changed.
SP arches, interior parts retrimmed, crystal side repeaters and a few other small bits.. And a lot of new detailing products and at long last.. SUN!!!
Me and my mates polo.
A picture from my holiday (before arches.. obv.. )
Thanks for looking!!
#42: Re: ARRAN's Quiksilver - UPDATES 3/6/13 Author: ARRAN, Location: WiltshirePosted: Mon Jun 03, 2013 11:22 am ---- I forgot this one..
#43: Re: ARRAN's Quiksilver - UPDATES 3/6/13 Author: ARRAN, Location: WiltshirePosted: Sat Jun 22, 2013 8:36 am ---- UPDATE
At long last the wheels have been sorted..
BMW sparkling metallic graphite
Aaaaaand.. RUBBER!
Oops did I buy 165s? My bad.. stretch
#44: Re: ARRAN's Quiksilver - Progress Blog Author: sam-c, Location: Uni: Kent Home: ScunthorpePosted: Sat Jun 22, 2013 2:59 pm ----
ARRAN wrote:
nonamecc79 wrote:
Looks like a GTi mate, really good work!! Loving the boot build, must sound mad when you're pumping it.
Cheers for the positive comment fella!
Yeah sounds real good, sometime in the new year I'm hoping to go full JBL; much bigger and much louder.
Glad to hear a new install is on the cards!
The car looks stunning but then came the pic of the boot and couldn't help but think it lets the car down
#45: Re: ARRAN's Quiksilver - UPDATE with pictures 22/6 Author: Lex206, Location: HollandPosted: Sat Jun 22, 2013 3:37 pm ---- looks nice.be carefull with the nankangs in the wet
#46: Re: ARRAN's Quiksilver - UPDATE with pictures 22/6 Author: ARRAN, Location: WiltshirePosted: Sun Jun 23, 2013 3:54 pm ----
stretch anyone?
#47: Re: ARRAN's Quiksilver - UPDATE with pictures 22/6 Author: sam-c, Location: Uni: Kent Home: ScunthorpePosted: Sun Jun 23, 2013 3:57 pm ---- Wow loving the wheels! Much better now they have been sprayed! They are calling out for some spacing and camber adjustments hehe
#48: Re: ARRAN's Quiksilver - UPDATE with pictures 22/6 Author: Addaz, Location: SuffolkPosted: Sun Jun 23, 2013 4:50 pm ---- As low as what my baby was
#49: Re: ARRAN's Quiksilver - UPDATE with pictures 22/6 Author: Jaketee92, Posted: Mon Jul 01, 2013 11:59 am ---- hows it sitting now the coilevers have had chance to settle?
im looking at lowering mine 8omm but dont want it to look odd if you get me?
cheers
#50: Re: ARRAN's Quiksilver - UPDATE with pictures 22/6 Author: Jaketee92, Posted: Mon Jul 01, 2013 12:01 pm ---- how much is yours lowered all round mate?
#51: Re: ARRAN's Quiksilver - UPDATE with pictures 22/6 Author: Mada, Location: Manchester/ AberdeenPosted: Mon Jul 01, 2013 12:28 pm ---- It's gotta be asked, how do you get on with speed bumps?
#52: Re: ARRAN's Quiksilver - UPDATE with pictures 22/6 Author: Reaper80, Posted: Tue Jul 02, 2013 5:31 am ---- Christ, i thought mine was look. That's lower than your Nans nipples my friend ! sparks must be fun !
#53: Re: ARRAN's Quiksilver - UPDATE with pictures 22/6 Author: ARRAN, Location: WiltshirePosted: Tue Jul 02, 2013 12:09 pm ---- Thanks for all the positive comments Haha, I do struggle with speedbumps and suchlike.. but I have got used to the low life..
#62: Re: ARRAN's Quiksilver - UPDATE with pictures 22/6 Author: ARRAN, Location: WiltshirePosted: Thu Sep 12, 2013 11:47 am ---- no update just some pics
thanks for looking
#63: Re: ARRAN's Quiksilver - UPDATE with pictures 22/6 Author: Diabloreddan, Posted: Thu Sep 12, 2013 12:04 pm ---- Cars come a long way buddy looks great
#64: Re: ARRAN's Quiksilver - UPDATE with pictures 22/6 Author: ARRAN, Location: WiltshirePosted: Mon Jan 12, 2015 6:04 am ---- Havent posted on here in ages, due to selling up and getting a new toy
206 will be missed massively, such a great community of people on here! Thanks for everyones help over the past few years
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 1
New Yesterday: 0
Overall: 17133
Online Now [507]:
Visitors: 506
Members: 0
Staff Online Now:
Page Views:
General
coilovers have settled a bit more, however still needs to go looooower on the front 
Very apt number plate too! Keep it up 
