#16: Re: 206cc Oil pressure insufficient Author: Seabook, Posted: Sun Oct 09, 2011 10:24 am ---- different grade of oil rarely cause oil pressure problem in 206.
could be bockage in oil pump? or just a fault sensor really :s
#17: Re: 206cc Oil pressure insufficient Author: Lee, Location: EnglandPosted: Sun Oct 09, 2011 10:25 am ---- Sure the dip stick, filter, oil cap are on secure?
#18: Re: 206cc Oil pressure insufficient Author: macj, Location: EssexPosted: Sun Oct 09, 2011 10:26 am ---- Get the engine flushed, change to a specified oil and change the filter. Then see if the fault clears. For the cost of the oil and filter its a good first test
#19: Re: 206cc Oil pressure insufficient Author: silverfox1264, Location: NorthamptonshirePosted: Sun Oct 09, 2011 10:30 am ----
macj wrote:
Get the engine flushed, change to a specified oil and change the filter. Then see if the fault clears. For the cost of the oil and filter its a good first test
Yep he is going to get oil change in next couple of days. Then will have to see if that helps.
But it was showing the fault before the oil was put in.
#20: Re: 206cc Oil pressure insufficient Author: greg.mitchell350, Location: Milton KeynesPosted: Sun Oct 09, 2011 10:30 am ---- ok i assumed that since you mentioned about a service a couple of months ago it had only happened since then. if its a pre-occuring fault it might be worth flushing the engine as 'macj' said and trying the specific grade of oil but it might not be the fault. unless ofcourse the previous oil was really bad and has slightly blocked the oil pump, but if this is the case an engine flush should help this
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17134
Online Now [1293]:
Visitors: 1292
Members: 0
Staff Online Now:
Page Views:
General
