#1: Stopping the flashing air bag light after fitting wheel? Author: trackgti, Location: WiltshirePosted: Sun Oct 09, 2011 11:16 am ---- Hi Guys,
I've fitted a momo steering wheel/boss to our 206 gti (138hp) but the air bag light is still flashing after fitting the wires that were supplied with the boss, as shown:
Is this right? and if so, the wires are rather loose when put into the orange connector!
I believe the green and red to be the horn wires, so guessed i've got it right? I'm not sure if the orange wires going to the seat belts are affecting it also? as we've removed these to fit harnesses.
I'd prefer to get it wired up correctly than just removing the bulb by the way!
Hope someone can shed some light, Cheers,
#2: Re: Stopping the flashing air bag light after fitting wheel? Author: Lee, Location: EnglandPosted: Sun Oct 09, 2011 11:20 am ---- Yeah course they will affect it!
Just remove the airbag ECU
#3: Re: Stopping the flashing air bag light after fitting wheel? Author: shell-vt, Location: durhamPosted: Sun Oct 09, 2011 11:52 am ---- doesant work like that by just removung ecu, mine,s still on.
#4: Re: Stopping the flashing air bag light after fitting wheel? Author: Lee, Location: EnglandPosted: Sun Oct 09, 2011 11:59 am ---- You disabled it in the BSI?
#5: Re: Stopping the flashing air bag light after fitting wheel? Author: shell-vt, Location: durhamPosted: Sun Oct 09, 2011 12:33 pm ---- ouch ....no just disconected battery took ecu out fitted wheel light still on
#6: Re: Stopping the flashing air bag light after fitting wheel? Author: Lee, Location: EnglandPosted: Sun Oct 09, 2011 12:36 pm ---- Then the removal is just partly done
#7: Re: Stopping the flashing air bag light after fitting wheel? Author: shell-vt, Location: durhamPosted: Sun Oct 09, 2011 12:47 pm ---- sorry anyway of completing multi plex
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy