#1: Blip key starting problem Author: scotty57, Location: DerbyshirePosted: Fri Oct 28, 2011 3:27 am ---- Hi everyone. The buttons on the remote key fob were worn out so I bought a new shell off ebay. I swapped the blade and circuit board over and the new key locks & unlocks the car but there must be a problem with the immobiliser as the car turns over but will not start. The spare key still starts the car as normal.
Any ideas ?
#2: Re: Blip key starting problem Author: davecuk, Location: lincsPosted: Fri Oct 28, 2011 4:31 am ---- hi, when you swapped the board over, did you swap the black chip too? if not make sure you can find it, as you won't be able to use the plip without it.
#3: Re: Blip key starting problem Author: Dutch-HDi, Location: West MidlandsPosted: Fri Oct 28, 2011 4:38 am ----
davecuk wrote:
hi, when you swapped the board over, did you swap the black chip too? if not make sure you can find it, as you won't be able to use the plip without it.
You need the transponder in the new flip key, just a small black chip transfered to then at should be ok
#4: Re: Blip key starting problem Author: elted, Location: DublinPosted: Fri Oct 28, 2011 4:44 am ----
When you open the fob, the transponder chip is in the side that holds the key blade, small & grey, remove with care.
#5: Re: Blip key starting problem Author: MrBSI, Location: What's it to you? ? ?Posted: Fri Oct 28, 2011 4:45 am ----
scotty57 wrote:
Hi everyone. The buttons on the remote key fob were worn out so I bought a new shell off ebay. I swapped the blade and circuit board over and the new key locks & unlocks the car but there must be a problem with the immobiliser as the car turns over but will not start. The spare key still starts the car as normal.
Any ideas ?
Transponder chip is still inside your old keyfob.
#6: Re: Blip key starting problem Author: macca1411, Location: Westhoughton, LancashirePosted: Fri Oct 28, 2011 6:43 am ----
#7: Re: Blip key starting problem Author: scotty57, Location: DerbyshirePosted: Fri Oct 28, 2011 8:31 am ---- of course - what a plonker !!! thanks guys.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [363]:
Visitors: 362
Members: 0
Staff Online Now:
Page Views:
General
