#2: Re: Engine Noise from Peugeot 206 LX Author: E5GDM, Location: EssexPosted: Thu Nov 10, 2011 8:58 am ---- Sounds more like its catching on something or a bearing is going.
#3: Re: Engine Noise from Peugeot 206 LX Author: cartoonhead, Location: North ManchesterPosted: Thu Nov 10, 2011 9:57 am ---- tensioner / roller bearing on its way out
#4: Re: Engine Noise from Peugeot 206 LX Author: m3g4tr0n, Location: EnglandPosted: Thu Nov 10, 2011 11:33 am ---- is this the tensioner?
and can the roller bearing be replaced or do i need a new tensioner
thanks
#5: Re: Engine Noise from Peugeot 206 LX Author: cartoonhead, Location: North ManchesterPosted: Thu Nov 10, 2011 11:47 am ---- lookin at the pic i would say that one arrowed is the tensioner and the one under that is the roller.
fit a new one
#6: Re: Engine Noise from Peugeot 206 LX Author: Antknee, Location: ManchesterPosted: Thu Nov 10, 2011 11:53 am ---- wouldnt drive it incase it goes... mine did but was lucky enough for it to not destroy the engine...
get a new belt while your at it
#7: Re: Engine Noise from Peugeot 206 LX Author: m3g4tr0n, Location: EnglandPosted: Thu Nov 10, 2011 12:25 pm ---- @cartoonhead
do you mean change the tensioner or the bearing?
any part numbers or links of where i can get one?
the car is a
2003 PEUGEOT 206 1.4 LX 3dr Auto [AC] Hatchback
#8: Re: Engine Noise from Peugeot 206 LX Author: cartoonhead, Location: North ManchesterPosted: Thu Nov 10, 2011 2:19 pm ---- remove the belt and if the tensioner is wobbly just replace the whole thing.
as Antknee said , change the belt while its off
not suggesting to get this one ( try local motor shop ) but its what you are looking for
#9: Re: Engine Noise from Peugeot 206 LX Author: V9977, Location: Athens, GreecePosted: Thu Nov 10, 2011 5:02 pm ----
Antknee wrote:
wouldnt drive it incase it goes... mine did but was lucky enough for it to not destroy the engine...get a new belt while your at it
Can this happen with the aux belt?
I thought it was the cam belt that casues damage if it goes.
But ye new belt too.
#10: Re: Engine Noise from Peugeot 206 LX Author: m3g4tr0n, Location: EnglandPosted: Fri Nov 11, 2011 12:17 pm ---- ok, just took a picture and saw that there's two tensioners (no 5 & 6)?
#11: Re: Engine Noise from Peugeot 206 LX Author: Lee, Location: EnglandPosted: Fri Nov 11, 2011 12:22 pm ----
V9977 wrote:
Antknee wrote:
wouldnt drive it incase it goes... mine did but was lucky enough for it to not destroy the engine...get a new belt while your at it
Can this happen with the aux belt?
I thought it was the cam belt that casues damage if it goes.
But ye new belt too.
Yeah if it jams the bottom crank pulley
#12: Re: Engine Noise from Peugeot 206 LX Author: cartoonhead, Location: North ManchesterPosted: Fri Nov 11, 2011 1:49 pm ---- 5 is the roller 6 is the tensioner , best bet is get the belt off and see which one has any play / wobble on it.
V9977 wrote:
Can this happen with the aux belt?
Have a look HERE to see what happened to mine when the aux belt split and wrapped it's self around the crank pully
#13: Re: Engine Noise from Peugeot 206 LX Author: V9977, Location: Athens, GreecePosted: Fri Nov 11, 2011 6:49 pm ----
cartoonhead wrote:
5 is the roller 6 is the tensioner , best bet is get the belt off and see which one has any play / wobble on it.
V9977 wrote:
Can this happen with the aux belt?
Have a look HERE to see what happened to mine when the aux belt split and wrapped it's self around the crank pully
Dam, I din't know that.
#14: Re: Engine Noise from Peugeot 206 LX Author: m3g4tr0n, Location: EnglandPosted: Sat Nov 12, 2011 4:24 pm ---- what would you is the difficulty of this job?
would i need any special tools to remove the tensioner and belt?
what's the difference between these belts and which one is shown on the picture posted above
Serpentine Belt
Auxiliary Belt
Ancillary Drive Belt
Timing Belt
Cam Belt
is any of this stuff covered in the Haynes Guide? will be getting one next week.
thanks
#15: Re: Engine Noise from Peugeot 206 LX Author: paul_c, Location: UKPosted: Sun Nov 13, 2011 5:37 am ----
m3g4tr0n wrote:
what would you is the difficulty of this job?
????
m3g4tr0n wrote:
would i need any special tools to remove the tensioner and belt?
No
m3g4tr0n wrote:
what's the difference between these belts and which one is shown on the picture posted above
Serpentine Belt
Auxiliary Belt
Ancillary Drive Belt
Just semantics, names for the same thing
m3g4tr0n wrote:
Timing Belt
Cam Belt
Just semantics, names for the same thing
m3g4tr0n wrote:
is any of this stuff covered in the Haynes Guide? will be getting one next week.
thanks
Its all covered in the Haynes manual, you're probably best waiting for it to arrive and have a good read through the relevant sections.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [72]:
Visitors: 71
Members: 0
Staff Online Now:
Page Views:
General
