#16: Re: French piece of s***... help please! Author: Silvery206, Location: NottinghamPosted: Thu Jan 05, 2012 3:23 pm ---- Most likely the speedo unit.
#17: Re: French piece of s***... help please! Author: JordGJ, Location: Leeds / West MidlandsPosted: Thu Jan 05, 2012 3:23 pm ----
Lee wrote:
Plug the laptop in to see if it's reading the RPM
me don't know how to do this erghhhh
#18: Re: French piece of s***... help please! Author: Addaz, Location: SuffolkPosted: Thu Jan 05, 2012 3:24 pm ----
Harry wrote:
Saxo has always done it, diagnoses equipment doesn't work with it so I checked all the fuses, replaced the cluster and it is still doing it.
Haven't got round to trying anything else yet
Speed sensor
#19: Re: French piece of s***... help please! Author: Lee, Location: EnglandPosted: Thu Jan 05, 2012 3:25 pm ---- Are you in leeds?
If so, i'm heading north on the M1 tomorrow, if you meet me enroute, I'll quickly plug the laptop in.
#20: Re: French piece of s***... help please! Author: Mike_XS, Location: SouthamptonPosted: Thu Jan 05, 2012 3:30 pm ---- Could this be another problem you can add to the list you can blame on being so low?
#21: Re: French piece of s***... help please! Author: JordGJ, Location: Leeds / West MidlandsPosted: Thu Jan 05, 2012 3:31 pm ----
Lee wrote:
Are you in leeds?
If so, i'm heading north on the M1 tomorrow, if you meet me enroute, I'll quickly plug the laptop in.
no i'm not unfortunately
cheers though
#22: Re: French piece of s***... help please! Author: Harry, Location: StaffordPosted: Thu Jan 05, 2012 3:36 pm ---- If you have a latop - this www.ebay.co.uk/itm/ELM...1e6791bf32
Learnt a lot from Lee
Addaz wrote:
Harry wrote:
Saxo has always done it, diagnoses equipment doesn't work with it so I checked all the fuses, replaced the cluster and it is still doing it.
Haven't got round to trying anything else yet
Speed sensor
When I get round to it
Starting with the easiest things first
#23: Re: French piece of s***... help please! Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Thu Jan 05, 2012 3:44 pm ---- Is that item acturaly any good Harry? Been looking for one like that, it's just had one for my Astra like that once and it didn't work.
#24: Re: French piece of s***... help please! Author: Harry, Location: StaffordPosted: Thu Jan 05, 2012 3:48 pm ---- Does the job, the guy I bought it off just threw a load of programs onto the disk so it took a while to get the right one working but it's good now it is.
Reads and clears codes, shows engine temp, revs, throttle position etc
Feel free to borrow mine if you want to test it before you pay out some cash for it.
#25: Re: French piece of s***... help please! Author: AshH, Location: BirminghamPosted: Thu Jan 05, 2012 3:49 pm ---- Is it me or does it seem Adam wants the competition to be taken to the scrappy lol
#26: Re: French piece of s***... help please! Author: Lee, Location: EnglandPosted: Thu Jan 05, 2012 3:50 pm ---- Ben...china clone will be ok for scanning just don't do programming
#27: Re: French piece of s***... help please! Author: JordGJ, Location: Leeds / West MidlandsPosted: Thu Jan 05, 2012 3:54 pm ---- disconnected for 15 mins and reconnected, still the same... why can't the cluster be taken apart and repaired why does it have to be replaced all together ?
#28: Re: French piece of s***... help please! Author: HDI90, Location: sunny stokePosted: Fri Jan 06, 2012 2:54 am ---- If you want to buy a just a new rev counter you can, also the speedo motor is the same as the rev counter motor
this happend to me last year so all i did was swap the speedo and rev counter around to find the fault
#29: Re: French piece of s***... help please! Author: rick-gti, Location: welshpool, mid walesPosted: Fri Jan 06, 2012 3:07 am ---- this happened with my gti 138. replaced the cluster and still remained. i tried another cluster to make sure i hadnt got a dud and it worked fine. must be a common problem on these.
is your pug multi plex? mine isnt so cost me a fair bit for the clusters, think multi plex type are cheaper tho.
should find a set for £30 make sure they work
#30: Re: French piece of s***... help please! Author: sillyhilly, Location: The Mean Streets of CoventryPosted: Fri Jan 06, 2012 4:54 am ---- Who really needs a rev counter?!
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17132
Online Now [61]:
Visitors: 60
Members: 0
Staff Online Now:
Page Views:
General
erghhhh
