#1: Head bolt torque settings Author: Ash_guff, Location: N.walesPosted: Thu Jan 19, 2012 2:59 pm ---- Hi im re-building my engine on my gti 138,does anyone no the torque settings for the head bolts?
#2: Re: Head bolt torque settings Author: Addaz, Location: SuffolkPosted: Thu Jan 19, 2012 3:10 pm ---- Its a small amount heading in an outwards circle then a degree
Grease the bolts before putting the new headbolts in, dont want snappy snappy now
#3: Re: Head bolt torque settings Author: richpowell91, Location: Melton Mowbray LeicestershirePosted: Thu Jan 19, 2012 3:12 pm ----
#4: Re: Head bolt torque settings Author: Seabook, Posted: Thu Jan 19, 2012 3:14 pm ---- 8/4/1/5/9
7/3/2/6/10
proceed bolt by bolt in the order shown
tightening torque of bolts : 5 da.Nm
proceed bolt by bolt in the order shown
tightening torque of bolts : 2 da.Nm
proceed bolt by bolt in the order shown
loosen by 1 turn(s)
proceed bolt by bolt in the order shown
tighten a further 285 degrees
This. new bolts must be used
#5: Re: Head bolt torque settings Author: Addaz, Location: SuffolkPosted: Thu Jan 19, 2012 3:27 pm ---- Seee i was right, and i didnt copy and paste
#6: Re: Head bolt torque settings Author: Ash_guff, Location: N.walesPosted: Thu Jan 19, 2012 3:29 pm ---- Cheers everyone for your help
#7: Re: Head bolt torque settings Author: Seabook, Posted: Thu Jan 19, 2012 4:32 pm ----
Addaz wrote:
Seee i was right, and i didnt copy and paste
if you don't know you should be fired
#8: Re: Head bolt torque settings Author: gixxerkev, Location: wiltshirePosted: Fri Jan 20, 2012 4:18 am ---- Dont use grease on the bolt threads, use clean engine oil.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [137]:
Visitors: 137
Members: 0
Staff Online Now:
Page Views:
General
