#106: Re: 1.4 lx .... START OF BOOT BUILD :) Author: BioCustoms, Location: LeedsPosted: Mon May 07, 2012 2:34 pm ---- Back to the grille as you can see im gonna be chopping,replacing,liifting and chopping somemore to get this to fit mint ....
and today iv also started on a full custom boot build st fot the 206 started by taking the mould of the boot ....
#107: Re: 1.4 lx ...START OF THE BOOTBUILD :) Author: 00budham00, Location: IpsPosted: Wed May 16, 2012 11:48 am ---- Cool
#108: Re: 1.4 lx ...START OF THE BOOTBUILD :) Author: rick-gti, Location: welshpool, mid walesPosted: Fri May 18, 2012 4:29 am ---- Getting on well with it mate, im doing my bonnet when i get chance any tips to get it perfect?
#109: Re: 1.4 lx ...START OF THE BOOTBUILD :) Author: BioCustoms, Location: LeedsPosted: Fri May 18, 2012 5:05 am ----
rick-gti wrote:
Getting on well with it mate, im doing my bonnet when i get chance any tips to get it perfect?
Mmmmm get a good quality wrap the link to the guy I used is on the 2nd page and it takes more heat to manipulate it so don't be scared and if you get any fold marks or anything like that don't panic its very forgiving and I used a tailors chalk to mark out the lines so it was perfect when cut and I would deffinetly use adesion prom 3m supply it ..... As it happens tho iv had a change of mind with mine because I'm wanting gloss now so I'm looking for a swap and 40 pound for the wrap used because I don't want to ruin the wrap thers nothing wrong with it Last edited by BioCustoms on Fri May 18, 2012 5:06 am; edited 1 time in total
#110: Re: 1.4 lx ...START OF THE BOOTBUILD :) Author: Razpulsedj, Location: Partying with the Info ShufflersPosted: Fri May 18, 2012 5:06 am ---- Coming along really nicely that is One to watch
#111: Re: 1.4 lx ...START OF THE BOOTBUILD :) Author: rick-gti, Location: welshpool, mid walesPosted: Fri May 18, 2012 5:11 am ---- Did you cut it slightly bigger and fold it under the lips? Where did you use the adhesive?
#112: Re: 1.4 lx ...START OF THE BOOTBUILD :) Author: BioCustoms, Location: LeedsPosted: Fri May 18, 2012 6:05 am ----
rick-gti wrote:
Did you cut it slightly bigger and fold it under the lips? Where did you use the adhesive?
I'd use it on all eges specialy edges that form a 90 degree bend and yes leave it around 20 to 15mm longer its prefrence really to how long you want to leave it just don't have it any leass then 10mm bud
#113: Re: 1.4 lx ...START OF THE BOOTBUILD :) Author: BioCustoms, Location: LeedsPosted: Tue Jun 05, 2012 3:37 pm ---- right guys had a little break from the car as iv been super busy with work but getting back on track now .. had some massive change of minds lately .......
to start with i wrapped the top of the tailgate
then i decided that i hated the wrap so iv stripped the wrap and gone on to gloss blacking it all..
flatted the tailgate and glossed the roof ..
bought some wide arched pretty good nick just needed a flat and a recolour all rubbers and clips ...
got my hands on this gti spoiler also pretty good condition sanded down and re glossed looks pretty smart
stripped the wrap off the bonnet goinf to weld the gap up and do something the the pollen filter vent might convert it in to a a box vent??
also got fed up with the grill i was fabricating so i bought this bad egg
i got the rest of my interior back today and it looks ace started buy putting the handbreak and gear stick surround back in...
#114: Re: 1.4 lx ... GLOSSED ROOF, WIDE ARCHES :) Author: Mephisto, Location: ScotlandPosted: Tue Jun 05, 2012 7:10 pm ---- I love the dash, looks awesome!
#115: Re: 1.4 lx ... GLOSSED ROOF, WIDE ARCHES :) Author: Jensen, Location: ScunthorpePosted: Wed Jun 06, 2012 10:43 am ---- Loving the thread mate! Cars coming together awesome
Loving the thread mate! Cars coming together awesome
cheers bud always nice to hear the compliments and just waiting for the rain tostop now !! very fustrating
Tell me about it! Been waiting for a nice few days to get my
Black dash in, not that ive been putting it off at all #Brickingit! Loving the flock dash mate done a top job!
#118: Re: 1.4 lx ... GLOSSED ROOF, WIDE ARCHES :) Author: Nimminz, Location: Durham, NE England, UKPosted: Fri Jun 08, 2012 10:22 am ---- Looking good mate!
That flocked dash is lovely, Got mine done recently but the 206 dash is all curvy and looks much better than mine. Keep some masking tape in the car, easiest way I've found to get it looking clean when i gets dusty etc.
Loving the thread mate! Cars coming together awesome
cheers bud always nice to hear the compliments and just waiting for the rain tostop now !! very fustrating
Tell me about it! Been waiting for a nice few days to get my
Black dash in, not that ive been putting it off at all #Brickingit! Loving the flock dash mate done a top job!
Well after stripping the whole interior out I feel quiet confident with it all, so if you need any advice don't hesitate to ask bud
That flocked dash is lovely, Got mine done recently but the 206 dash is all curvy and looks much better than mine. Keep some masking tape in the car, easiest way I've found to get it looking clean when i gets dusty etc.
Ye mate masking tape.. but I use a lint roller more or less the same sort of idea instead it rolls over it instead of pulling at the fibres pic them up for like 3 for a quid in the pound shop plus they have a handle what car dash have you had flocked bud?
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [283]:
Visitors: 282
Members: 0
Staff Online Now:
Page Views:
General
One to watch
so iv stripped the wrap and gone on to gloss blacking it all..
and just waiting for the rain tostop now !! very fustrating
#Brickingit! Loving the flock dash mate done a top job!
