#1: Brake disc locator bolts Author: fmonkey, Location: stamfordPosted: Fri Feb 17, 2012 11:02 am ---- Well changed disc and pads, on one side then the other side I could not for the life of me move the bolt so not it rounded.
Any help please?
Cheers
#2: Re: Brake disc locator bolts Author: MrBSI, Location: What's it to you? ? ?Posted: Fri Feb 17, 2012 11:04 am ---- Tip with these is:
Impact driver with a correctly fitting bit in the end for the screw head
OR
Fit the bit in the disc screw then sharply smack it a couple of times with a hammer before you then attempt to undo it.
#3: Re: Brake disc locator bolts Author: fmonkey, Location: stamfordPosted: Fri Feb 17, 2012 11:08 am ---- Now you tell me lol well I may have to go to a garage just to get one bolt off, how gay.
Can't I drill it out?
#4: Re: Brake disc locator bolts Author: Edward, Location: In the garagePosted: Fri Feb 17, 2012 11:11 am ---- Get the drill out!
#5: Re: Brake disc locator bolts Author: Seabook, Posted: Fri Feb 17, 2012 11:49 am ---- impact driver always work for me
#6: Re: Brake disc locator bolts Author: Timon2210, Location: PalestinePosted: Fri Feb 17, 2012 12:07 pm ---- You sure can drill it out,take the bolt head off,and you can then take the discs out,and it will be easier to hold the bolt now,and take it off,and buy new ones Last edited by Timon2210 on Sat Feb 18, 2012 1:06 am; edited 1 time in total
#7: Re: Brake disc locator bolts Author: fmonkey, Location: stamfordPosted: Fri Feb 17, 2012 1:32 pm ---- Cheers guys what a pain in the a**e. Bought myself some new ones 79p for two which is ok.
#8: Re: Brake disc locator bolts Author: Seabook, Posted: Fri Feb 17, 2012 1:51 pm ---- my new disc come with bolts......
#9: Re: Brake disc locator bolts Author: MrBSI, Location: What's it to you? ? ?Posted: Fri Feb 17, 2012 1:53 pm ----
Seabook wrote:
my new disc come with bolts......
My Brembo's did to.
#10: Re: Brake disc locator bolts Author: ianm92, Location: sunderlandPosted: Fri Feb 17, 2012 5:29 pm ---- you can also cut a line or hammer a line thru it so that you can use an impacted driver with a flat screw driver end to get them off be for u get the drill out
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [205]:
Visitors: 204
Members: 0
Staff Online Now:
Page Views:
General
