#1: speed sensor connections Author: davecuk, Location: lincsPosted: Sat Feb 18, 2012 5:09 am ---- Hi, I'm sorting out my non working speedo has anyone got the wiring connection data for the plug on the sensor? Many thanks Dave 2001 non plexed 1.9 d
#2: Re: speed sensor connections Author: kit325, Location: LondonPosted: Sat Feb 18, 2012 5:49 am ---- What are the symptoms?
Did the speedo needle flick when u turn on or off the engine? It is common for non plexed 206 speedo cluster failed.
#3: Re: speed sensor connections Author: davecuk, Location: lincsPosted: Sat Feb 18, 2012 6:03 am ---- hi, yes it does, i have replaced the sensor and tried a few other clock sets but i want to check the wiring in case there's a break somewhere so would like to know pin connection function to aid me
#4: Re: speed sensor connections Author: Edward, Location: In the garagePosted: Sat Feb 18, 2012 10:48 am ---- Check the large connector behind the passenger side front bumper.
#5: Re: speed sensor connections Author: davecuk, Location: lincsPosted: Fri Mar 23, 2012 10:34 am ---- hi, still having probs with the speedo, has anyone got the connection details for the 3 pin plug on the gearbox sensor?thanks Dave
#6: Re: speed sensor connections Author: Edward, Location: In the garagePosted: Fri Mar 23, 2012 11:33 am ---- Have you checked the connector behind the bumper? Wiring tends to be faulty at the terminals rather than along its length.
#7: Re: speed sensor connections Author: davecuk, Location: lincsPosted: Fri Mar 23, 2012 11:50 am ---- hi, thanks for that, I have got 12volts at the sensor but would like to know the pin out of the sensor plug. the loom has been replaced from the plug to a joint away from it, and I need to check the pin out so that it's correct so as to make sure that the speedo itself is ok.
#8: Re: speed sensor connections Author: Linkpad, Location: WalesPosted: Fri Mar 23, 2012 3:33 pm ---- I have the same problem with my 206 non plexed, i open the door and no alarm or lights go off when im driving so is this a wiring problem ?
Could anyone take a pic of where this passenger bumper connection is, do you mean under the wheel arch ? I looked everywhere for connections.
#9: Re: speed sensor connections Author: davecuk, Location: lincsPosted: Fri Mar 23, 2012 3:45 pm ---- hi, the connector is in front of the wheel arch liner, passengers side, it's a twist to release and a bind to get back in place, as there's a locking ring that takes some aligning to get back together.hope this helps, Dave
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [405]:
Visitors: 404
Members: 0
Staff Online Now:
Page Views:
General
