#1: angel light help Author: anton1989, Location: west midlandsPosted: Wed Mar 28, 2012 2:14 pm ---- does anyone know how to take the front plastic off the the lights pictured below? the cover on my sidelight came off when i was trying to get a bulb out that fell in there are a few metal clips on them which i have taken off but this did not do anything?
thanks in advance
#2: Re: angel light help Author: Mikey2uk, Location: StevenagePosted: Wed Mar 28, 2012 2:18 pm ---- Need heat to melt the glue but not too much heat tho
#3: Re: angel light help Author: anton1989, Location: west midlandsPosted: Wed Mar 28, 2012 2:33 pm ---- sounds like headace. i take it i would have to glue them back on, what glue would i have to use?
#4: Re: angel light help Author: Mikey2uk, Location: StevenagePosted: Wed Mar 28, 2012 2:35 pm ---- Silicone would be the best stuff to use
#5: Re: angel light help Author: anton1989, Location: west midlandsPosted: Wed Mar 28, 2012 2:40 pm ---- ok thanks alot
#6: Re: angel light help Author: Lee, Location: EnglandPosted: Wed Mar 28, 2012 2:45 pm ---- Put them in the oven at 100oC for 20 mins
#7: Re: angel light help Author: Mikey2uk, Location: StevenagePosted: Wed Mar 28, 2012 2:56 pm ---- Or use a heat gun
#8: Re: angel light help Author: Lee, Location: EnglandPosted: Wed Mar 28, 2012 2:57 pm ---- Oven is easier and less messing about.
#9: Re: angel light help Author: anton1989, Location: west midlandsPosted: Wed Mar 28, 2012 3:03 pm ---- will the oven not damage anything else? dont have a heat gun will a hair dryer do the job?
#10: Re: angel light help Author: Ash, Location: Running from Ant and Lee and Adam...........Posted: Wed Mar 28, 2012 3:05 pm ----
Lee wrote:
Put them in the oven at 100oC for 20 mins
Wait till they're golden brown and risen before taking them out.
#11: Re: angel light help Author: anton1989, Location: west midlandsPosted: Wed Mar 28, 2012 3:15 pm ----
Ash wrote:
Lee wrote:
Put them in the oven at 100oC for 20 mins
Wait till they're golden brown and risen before taking them out.
lol yh i'll try that.
#12: Re: angel light help Author: 138Andy, Location: NottsPosted: Wed Mar 28, 2012 3:22 pm ---- the silicone sealant shouldn't be set solid to begin with ? just stick a knife in it and cut around then peel it off when its separated
#13: Re: angel light help Author: Lee, Location: EnglandPosted: Wed Mar 28, 2012 3:32 pm ---- Stick them in the oven. I've done loads. Softens the glue equally and less chance in melting anything as you won't be tempted to hold the heat gun too close
#14: Re: angel light help Author: anton1989, Location: west midlandsPosted: Wed Mar 28, 2012 3:49 pm ----
Lee wrote:
Stick them in the oven. I've done loads. Softens the glue equally and less chance in melting anything as you won't be tempted to hold the heat gun too close
cheers ill be trying this tomorrow, let you know how i get on.
#15: Re: angel light help Author: Lee, Location: EnglandPosted: Wed Mar 28, 2012 3:51 pm ---- Put them on the middle shelf and pre-heat the oven.
20 mins for Ultra/In.pro
15 mins for china crap
#16: Re: angel light help Author: kurosagi01, Location: NorthamptonPosted: Thu Mar 29, 2012 9:35 am ---- I've had 4 sidelight bulbs stuck inside my angels and i tried getting them out with various methods,without taking the plastic casing off. They all ended up rolling underneath the projector, out of sight so i just them as it is as there not in sight anymore.
#17: Re: angel light help Author: anton1989, Location: west midlandsPosted: Sat Mar 31, 2012 4:06 am ----
Lee wrote:
Put them on the middle shelf and pre-heat the oven.
20 mins for Ultra/In.pro
15 mins for china crap
will be trying this today, my oven is rubish and always burns my food at the bottom, any tips when putting the light in? which way etc?
cheers
#18: Re: angel light help Author: anton1989, Location: west midlandsPosted: Sat Mar 31, 2012 4:11 am ----
kurosagi01 wrote:
I've had 4 sidelight bulbs stuck inside my angels and i tried getting them out with various methods,without taking the plastic casing off. They all ended up rolling underneath the projector, out of sight so i just them as it is as there not in sight anymore.
just leave them was that ment to be?
thats not the problem, i dont think mine are the same as yours, mine have a case over the side light same as the indicator (see pic on page 1). mine is falling off because i pushed it out while trying to get a bulb that fell in there.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17132
Online Now [570]:
Visitors: 569
Members: 0
Staff Online Now:
Page Views:
General
there are a few metal clips on them which i have taken off but this did not do anything?
