#1: dashboard/airbag help Author: anton1989, Location: west midlandsPosted: Sun Apr 15, 2012 12:55 pm ---- just swapped my dashboard (5 hours later), its from a 5 door and my car is 3 door the one i fitted don't seem to have a airbag on the passengers side? now my air bag light is flashing which means it will fail an m.o.t what can i do, apart from put my old dash back in?
#2: Re: dashboard/airbag help Author: Lee, Location: EnglandPosted: Sun Apr 15, 2012 1:05 pm ---- The airbag area should just pop/cut out and you can fit the airbag
#3: Re: dashboard/airbag help Author: anton1989, Location: west midlandsPosted: Sun Apr 15, 2012 1:11 pm ----
Lee wrote:
The airbag area should just pop/cut out and you can fit the airbag
cheers, ill be ok till the m.o.t though wont i?
how come the 5 door does not have them?
#4: Re: dashboard/airbag help Author: Lee, Location: EnglandPosted: Sun Apr 15, 2012 1:13 pm ---- None of the airbags will work nor seat pretensioners.
5 doors do have them, the dash will have either come off a poverty spec or a very early model
#5: Re: dashboard/airbag help Author: iainlovatt, Posted: Sun Apr 15, 2012 1:16 pm ---- I'm sure the light can be turned off by a computer, just get the car plugged into peugeot planet or similar job done, Last edited by iainlovatt on Sun Apr 15, 2012 1:16 pm; edited 1 time in total
#6: Re: dashboard/airbag help Author: anton1989, Location: west midlandsPosted: Sun Apr 15, 2012 1:16 pm ----
Lee wrote:
None of the airbags will work nor seat pretensioners.
5 doors do have them, the dash will have either come off a poverty spec or a very early model
so if i don't fix this asap my steering wheel airbag wont work?
#7: Re: dashboard/airbag help Author: Lee, Location: EnglandPosted: Sun Apr 15, 2012 1:17 pm ----
anton1989 wrote:
Lee wrote:
None of the airbags will work nor seat pretensioners.
5 doors do have them, the dash will have either come off a poverty spec or a very early model
so if i don't fix this asap my steering wheel airbag wont work?
Nope.
Quick fix would be to fit a resistor on the pass airbag.
@iainlovatt - no it can't as it's a perm fault
#8: Re: dashboard/airbag help Author: Lee, Location: EnglandPosted: Sun Apr 15, 2012 1:18 pm ---- Only way to do it, would be to disable the airbag all together via changing the setting in the ECU
#9: Re: dashboard/airbag help Author: Addaz, Location: SuffolkPosted: Sun Apr 15, 2012 1:22 pm ---- There is about 4 T20's holding the air bag blank in place
Easy swap
#10: Re: dashboard/airbag help Author: anton1989, Location: west midlandsPosted: Sun Apr 15, 2012 1:33 pm ----
Addaz wrote:
There is about 4 T20's holding the air bag blank in place
Easy swap
i went to do that but my old dash is grey and the new one black, no worries ill go get a black 1 airbag 1st thing.
#11: Re: dashboard/airbag help Author: anton1989, Location: west midlandsPosted: Sun Apr 15, 2012 1:35 pm ----
Lee wrote:
anton1989 wrote:
Lee wrote:
None of the airbags will work nor seat pretensioners.
5 doors do have them, the dash will have either come off a poverty spec or a very early model
so if i don't fix this asap my steering wheel airbag wont work?
Nope.
Quick fix would be to fit a resistor on the pass airbag.
@iainlovatt - no it can't as it's a perm fault
cheers for the help, was going to leave it but didn't know about it messing with my main airbag
#12: Re: dashboard/airbag help Author: anton1989, Location: west midlandsPosted: Sun Apr 15, 2012 1:52 pm ----
Lee wrote:
anton1989 wrote:
Lee wrote:
None of the airbags will work nor seat pretensioners.
5 doors do have them, the dash will have either come off a poverty spec or a very early model
so if i don't fix this asap my steering wheel airbag wont work?
Nope.
Quick fix would be to fit a resistor on the pass airbag.
@iainlovatt - no it can't as it's a perm fault
1 more question will this affect my steering wheel airbag? sorry no good with this stuff
#13: Re: dashboard/airbag help Author: Lee, Location: EnglandPosted: Sun Apr 15, 2012 1:58 pm ---- I have a black airbag if you're non-plexed?
If you fit the correct resistor then the Airbag ECU will think there is a airbag fitted, thus re-arming the SRS system
#14: Re: dashboard/airbag help Author: anton1989, Location: west midlandsPosted: Sun Apr 15, 2012 2:03 pm ----
Lee wrote:
I have a black airbag if you're non-plexed?
If you fit the correct resistor then the Airbag ECU will think there is a airbag fitted, thus re-arming the SRS system
what would you say i should do? yes my car is pre plexed, how much are you asking?
#15: Re: dashboard/airbag help Author: Lee, Location: EnglandPosted: Sun Apr 15, 2012 2:06 pm ---- I'd personally fit the airbag.
Depends what equipment you have to your avail. Like I could just go out and turn the airbag off and it would take 5 minutes, or go and fit a resistor and diode as I have a stock pile of them. But it's if you can do it?
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [124]:
Visitors: 123
Members: 0
Staff Online Now:
Page Views:
General
