#1: panels? Author: bezford, Location: darlingtonPosted: Tue Apr 24, 2012 2:05 pm ---- Is it possible to get a new replacement rear half panel for a 2002 3door 206gti?i guess the panel would cover from half way under the drivers door all the way to the rear edge at the boot lids edge and from top to bottom from the bottom cill edge fully covering,around the rear side window all the way up to the roofs edge where the join is made under the plastic roof bar on the roof on the drivers side again.not forgetting the fuel cap hole......where can i get one and would you know how much they are?thanks very much...
#3: Re: panels? Author: Seabook, Posted: Tue Apr 24, 2012 2:20 pm ---- this will not be cheap
#4: Re: panels? Author: usher, Location: northallertonPosted: Tue Apr 24, 2012 2:21 pm ---- how bad is your pannel can it not be filled/pulled
#5: Re: panels? Author: MrBSI, Location: What's it to you? ? ?Posted: Tue Apr 24, 2012 2:38 pm ---- Major welding job to change the panel & it needs doing correctly for the car to be safe in the event of an accident.
#6: Re: panels? Author: bezford, Location: darlingtonPosted: Tue Apr 24, 2012 4:15 pm ---- its already been filled and painted once but not too well so there's rust and a few bubbles coming thru so i need to get it done,the paint on the corner is a bit flat too so i need to find a cheap decent bodyshop near darlington/north east...........its a shame too because the rest of the cars realy quite nice.
#7: Re: panels? Author: lofty, Location: Near ManchesterPosted: Tue Apr 24, 2012 4:45 pm ---- I have damage on this panel and have no intention of replacing. My dent is pressed in around the size of a dinner plate. Paint is fine. Cost of dent repair for this approx anyone?
I have damage on this panel and have no intention of replacing. My dent is pressed in around the size of a dinner plate. Paint is fine. Cost of dent repair for this approx anyone?
is it a 3dr? can you not take the rear card of and push it out from inside? this what i done to mine
its already been filled and painted once but not too well so there's rust and a few bubbles coming thru so i need to get it done,the paint on the corner is a bit flat too so i need to find a cheap decent bodyshop near darlington/north east...........its a shame too because the rest of the cars realy quite nice.
i think you will be looking at at least 300-400 to get this fixed....
I have damage on this panel and have no intention of replacing. My dent is pressed in around the size of a dinner plate. Paint is fine. Cost of dent repair for this approx anyone?
Have you tried the hairdryer and air spray technique? Think that only works on fresh dents though.
#11: Re: panels? Author: MrBSI, Location: What's it to you? ? ?Posted: Wed Apr 25, 2012 8:14 am ----
lofty wrote:
I have damage on this panel and have no intention of replacing. My dent is pressed in around the size of a dinner plate. Paint is fine. Cost of dent repair for this approx anyone?
Get a quote from a SMART repairer.
Dont be tempted to diy it unless you know what your doing as you can make it worse / more expensive to fix!
#12: Re: panels? Author: lofty, Location: Near ManchesterPosted: Wed Apr 25, 2012 1:44 pm ---- I'm not attempting it myself as I also have a front wing to spray and have fitted. Plus other goodies
Is SMART a governing body for garages or something MrB?
I know at the end of the day i'll take it for a quote but any information is appreciated.
#13: Re: panels? Author: davecuk, Location: lincsPosted: Wed Apr 25, 2012 1:58 pm ---- Hi, smart repairers are ones that will improve/ remove panel damage using tools and techniques "smartmapuk.co.uk ", for info. hope this helps. Dave
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [326]:
Visitors: 325
Members: 0
Staff Online Now:
Page Views:
General
