#1: torque bolt size Author: paulspug, Location: Spalding lincolnshirePosted: Mon May 28, 2012 12:37 am ---- hi all
could anyone tell me what size the torque bolts are on the wishbones?
OR
what size socket i need to undo them please
2002 gti
thanks
#2: Re: torque bolt size Author: spike_202, Location: West midsPosted: Mon May 28, 2012 1:37 am ---- Do you not have a Haynes manual?
#3: Re: torque bolt size Author: paulspug, Location: Spalding lincolnshirePosted: Mon May 28, 2012 8:47 am ---- i have a haynes manual , but nowhere does it state what size torque socket to use. Even at the back where it states all the tools to use, it does not say sizes just torx of various sizes.
So ofc you obviously dont know and are trying to be smart ass.
To which i agree to the latter part
#4: Re: torque bolt size Author: NorthantsBen, Location: Raunds, NorthamptonshirePosted: Mon May 28, 2012 9:27 am ---- 12 or 13mm socket will work bodge way tho.
#5: Re: torque bolt size Author: spike_202, Location: West midsPosted: Mon May 28, 2012 10:07 am ---- Well for a start read your 1st post you asked what size torque bots ? I was assuming what you wrote was refuring to was 'what should they be torqued up to'. Torque is a value of tighness not size of a socket.
Torx is an allen key end with spikes.
I'm not a smartass I just no the difference.
#6: Re: torque bolt size Author: MrBSI, Location: What's it to you? ? ?Posted: Mon May 28, 2012 10:12 am ---- 3rd draw down of the roll cab for me
Anybody that wants to do diy maintenance on a 206 should have a set of Torx bits & sockets to cover all the sizes used.
#7: Re: torque bolt size Author: Seabook, Posted: Mon May 28, 2012 10:14 am ----
MrBSI wrote:
3rd draw down of the roll cab for me
Anybody that wants to do diy maintenance on a 206 should have a set of Torx bits & sockets to cover all the sizes used.
actually i was tempted to replace all the male/ female torx with allen socket bolt....
#8: Re: torque bolt size Author: MrBSI, Location: What's it to you? ? ?Posted: Mon May 28, 2012 10:19 am ----
Seabook wrote:
MrBSI wrote:
3rd draw down of the roll cab for me
Anybody that wants to do diy maintenance on a 206 should have a set of Torx bits & sockets to cover all the sizes used.
actually i was tempted to replace all the male/ female torx with allen socket bolt....
Nah, you want Ribe fixings
#9: Re: torque bolt size Author: usher, Location: northallertonPosted: Mon May 28, 2012 11:41 am ---- think it was et 16 or 14 socket torx then underneath is 21mm iirc
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [625]:
Visitors: 624
Members: 0
Staff Online Now:
Page Views:
General
bodge way tho. 
