#1: Fog light bumper install Author: gaffa786, Location: 2 Places at oncePosted: Sat Aug 04, 2012 5:44 pm ---- hi ok so i went to a scrappy and found a 206 with a bumper which had fog lights inside it. the guy wanted £35 for it but i cant remember if its a sport or non sport.
i want to put it on my car:
pre-plex
2000 (xreg)
i want the fog lights to work. will their be connectors already there for the fog lights after the bumper is removed or will i have to manually connect a wire to them.
also what will i need inside the car to turn the fog lights on? a new cheap switch or another stalk like the headlight one.
thanks
also is it easy and would their be any point of going through with the whole swap
#2: Re: Fog light bumper install Author: Domo, Location: EdinburghPosted: Sat Aug 04, 2012 5:54 pm ---- I have a gti bumper (i think) with fogs they arent connected up nd i have a switch in the car for front nd rear fogs the front don't switch on as their not connected and the rear is connected and does switch on. Its a 1999 XS. How can i get mine working?
Sorry for stealin your topic haha
#3: Re: Fog light bumper install Author: Matt, Posted: Sat Aug 04, 2012 5:54 pm ---- Think you need a new stalk from Lee.
#4: Re: Fog light bumper install Author: Matt, Posted: Sat Aug 04, 2012 5:56 pm ----
Domo wrote:
I have a gti bumper (i think) with fogs they arent connected up nd i have a switch in the car for front nd rear fogs the front don't switch on as their not connected and the rear is connected and does switch on. Its a 1999 XS. How can i get mine working?
Sorry for stealin your topic haha
I think here lies your problem.
#5: Re: Fog light bumper install Author: Domo, Location: EdinburghPosted: Sat Aug 04, 2012 6:30 pm ---- Yea but how do you connect them is question. Pictures welcome
#6: Re: Fog light bumper install Author: Matt, Posted: Sat Aug 04, 2012 6:55 pm ---- Usually the easiest way it to install a switch into the panel one the right side (near knee position) on the airbag panel.
You could do it properly, but I think you'd need a bsi update. If I am correct you can use your current stalk.
#7: Re: Fog light bumper install Author: Domo, Location: EdinburghPosted: Sat Aug 04, 2012 7:06 pm ---- There is already a switch for my fog lights. Same place as rear fog lights. The previous owner installed as there is a hand switch thing for radio but it doesnt work. Lol
#8: Re: Fog light bumper install Author: gaffa786, Location: 2 Places at oncePosted: Sat Aug 04, 2012 9:41 pm ---- would the connections for the fog lights already be there as they share the same wiring loom?
#9: Re: Fog light bumper install Author: QuArTz, Location: South CoastPosted: Sun Aug 05, 2012 2:14 am ----
gaffa786 wrote:
would the connections for the fog lights already be there as they share the same wiring loom?
That depends, some models have the wiring and connections, others dont.
Eitherway your, cheapest and simplist option would be to retro-fit the wiring and switch, as suggest by Matt.
Your other option is new stalk with the a front fog switch and possibly a new underbonnet fusebox, this is due the the fact some boxes (like mine) doesn't have the socket for the front fog fuse.
Then find a dealer or a member on here, who has PeugeotPlanet, to turn the fog light option 'on' within the BSI.
Ultimatly to do all the above you would need the front fog wiring loom, although you can take it from another model but the time, money and effort to go completley OEM would be a personal choice.
I went for the simpler/cheapest option
#10: Re: Fog light bumper install Author: anton1989, Location: west midlandsPosted: Sun Aug 05, 2012 4:05 am ---- just wire them to highbeam? or low
#11: Re: Fog light bumper install Author: QuArTz, Location: South CoastPosted: Sun Aug 05, 2012 5:49 am ----
anton1989 wrote:
just wire them to highbeam? or low
If he wires them into the headlights, its more than likely he'll get pulled by the police.
Ive been pulled over for having my fogs on when it wasn't foggy..
#12: Re: Fog light bumper install Author: Domo, Location: EdinburghPosted: Sun Aug 05, 2012 6:05 am ---- So there's no easy fix. Slot plug A into slot 3 type thing?
#13: Re: Fog light bumper install Author: -Dave-, Location: North ManchesterPosted: Sun Aug 05, 2012 6:20 am ---- If you want to connect them up via a stork you need to see if you have the fuse for it first I believe. Easiest way to do it is to wire them up to a separate switch in the car.
#14: Re: Fog light bumper install Author: iainlovatt, Posted: Sun Aug 05, 2012 7:05 am ---- i wired mine upto a separate switch, was ok but its a hell of a lot easier to wire it into high beam, makes sense too,
#15: Re: Fog light bumper install Author: Domo, Location: EdinburghPosted: Sun Aug 05, 2012 8:05 am ---- I think they wer wired up to a stirk(if thats the indicatir type switch) but then have been disconnected. I cnt even try fix atm only have one useable hand
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [333]:
Visitors: 332
Members: 0
Staff Online Now:
Page Views:
General
