New Here?
Toggle Content
   

Toggle Content User Info
Welcome

Anonymous

Nickname
Password
Register

Membership:
Latest: tbafonso
New Today: 0
New Yesterday: 0
Overall: 17130

Online Now [60]:
Visitors: 60
Bots: 0
Members: 0
Staff Online Now:

No staff members are online!
Page Views:
Today: 4642
Total: 102362133

Toggle Content Main Menu
 General Info Goodies Search Web Stats Members
 Donations

 

Forums ›

:: Forums ›
Janspeed cat-back exhaust fitting price?
-> 206 Talk

#1: Janspeed cat-back exhaust fitting price? Author: lee1985, Location: North West PostPosted: Wed Aug 15, 2012 7:22 am
    ----
Don't want to shop around first so that people try and take me for a ride.
There are many respected people on here in the know how.

What is a reasonable price to be quoted to fit a Janspeed Cat Back system? and what is too excessive. I bought one from eBay and now need it fitting. Can anyone give a price range band that I should really stick to?

I am based in Manchester.

I bought this and a K&N air filter/panel.
Don't want to add anything else as people have mentioned about losin low RPM power in order to give way for the gains of higher RPM that modding the GTI 180 gives. If these mods mean that my car will be a minimum 170bhp I'll be happy (I know that 180s are lower than 180 but would hope it would be reinstated to at least 170 with these mods)?!

Also can I just ask before I install, some people mention it is loud for motorway driving and I do a little motorway driving like 20 minutes every few days or so, how uncomfortable would this be compared to the standard exhaust which is a little loud anyway due to the natural RPM at 70mph?

Thank you

#2: Re: Janspeed cat-back exhaust fitting price? Author: Bassline_Toad, Location: Chester, UK PostPosted: Wed Aug 15, 2012 7:49 am
    ----
Fitting (If it's a direct fit for the car) should be minimal. Should be between £20-£40 depending on the place

Yeah, you will notice a difference in motorway driving, no doubt about it, the sound difference really depends on the exhaust you buy. I used to have one on the 206, and that was barely noticable, the one I've got now on the E46 is quite loud.

#3: Re: Janspeed cat-back exhaust fitting price? Author: L5_UKS, Location: West Midlands PostPosted: Wed Aug 15, 2012 8:36 am
    ----
Could do it yourself it's easy mate 2 clamps 3 rubbers and it's off might need 2 new clamps as they tend to be rusty.

#4: Re: Janspeed cat-back exhaust fitting price? Author: lee1985, Location: North West PostPosted: Wed Aug 15, 2012 9:15 am
    ----
Thanks guys. Can I just add as well, what's the difference between a K&N air filter and a panel filter, or are they the same thing? I've bought this for my GTI 180, I know it's not going to do much but still a slight improvement over the stock air filter. Was it a waste of money? www.ebay.co.uk/itm/390...1497.l2649

#5: Re: Janspeed cat-back exhaust fitting price? Author: 206boyracer, Location: Sunny Cornwall PostPosted: Wed Aug 15, 2012 9:18 am
    ----
What you have bought is a panel filter. It's reckoned that they are better than cone style filters because they are in the standard air box and somewhat shielded from any engine heat.

#6: Re: Janspeed cat-back exhaust fitting price? Author: lee1985, Location: North West PostPosted: Wed Aug 15, 2012 9:30 am
    ----
Thanks mate.

I'm learning! Very Happy

#7: Re: Janspeed cat-back exhaust fitting price? Author: nellyhaggis, Location: Sheffield PostPosted: Wed Aug 15, 2012 11:11 am
    ----
Order a stainless steel clamp for the back box connection and make sure you buy a new clamp for the connection to the cat. The cat clamp might need cut off and the back one will rust if you don't fit stainless.
Like said before, do it yourself it won't take long with a couple of ramps.
Ps. I think the front clamp is the same size as the smaller of the 2 spark plug sockets and due to the length of the thread on the clamp you will need to use it or a long socket.

#8: Re: Janspeed cat-back exhaust fitting price? Author: 206Mike, Location: Manchester PostPosted: Wed Aug 15, 2012 11:13 am
    ----
If you're in Manchester try BNS autos in Oldham. They fit mine on for £55, saying that it needed completely reworking because the exhaust wasn't made for the 206. If its £55 for the extra piping, hangers, and welding they needed to do they should be pretty cheap. Work is top quality too!



-> 206 Talk


Page 1 of 1
 
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL, Code Credits, Privacy Policy