#1: oil pressure switch.. Author: KrishanK, Location: LeicesterPosted: Thu Sep 13, 2012 8:56 am ---- Can someone please tell me where the oil pressure switch/sensor is on my peugeot 206 1.4 hdi 2003. thanks.
#2: Re: oil pressure switch.. Author: macca1411, Location: Westhoughton, LancashirePosted: Thu Sep 13, 2012 9:09 am ---- Next to the dipstick
#4: Re: oil pressure switch.. Author: macca1411, Location: Westhoughton, LancashirePosted: Thu Sep 13, 2012 10:34 am ---- Remove the wire and unscrew it. To refit do the opposite, replacing the sealing washer though.
#5: Re: oil pressure switch.. Author: bugawuga, Location: midsPosted: Thu Sep 13, 2012 2:21 pm ---- It's a fiddly job but as above.
Make sure you put some news paper / old rags down as oil will drip when the sensor is removed.
#6: Re: oil pressure switch.. Author: KrishanK, Location: LeicesterPosted: Sat Oct 13, 2012 8:34 am ----
macca1411 wrote:
Remove the wire and unscrew it. To refit do the opposite, replacing the sealing washer though.
does anybody know which sock i need to remove it? the sensors hard to get to..
#7: Re: oil pressure switch.. Author: KrishanK, Location: LeicesterPosted: Sat Oct 13, 2012 8:34 am ----
macca1411 wrote:
Remove the wire and unscrew it. To refit do the opposite, replacing the sealing washer though.
does anybody know which socket i need to remove it? the sensors hard to get to..
#8: Re: oil pressure switch.. Author: MrBSI, Location: What's it to you? ? ?Posted: Sat Oct 13, 2012 8:43 am ----
KrishanK wrote:
macca1411 wrote:
Remove the wire and unscrew it. To refit do the opposite, replacing the sealing washer though.
does anybody know which socket i need to remove it? the sensors hard to get to..
Why dont you try your sockets on the new switch.
#9: Re: oil pressure switch.. Author: KrishanK, Location: LeicesterPosted: Sat Oct 13, 2012 8:46 am ----
MrBSI wrote:
KrishanK wrote:
macca1411 wrote:
Remove the wire and unscrew it. To refit do the opposite, replacing the sealing washer though.
does anybody know which socket i need to remove it? the sensors hard to get to..
Why dont you try your sockets on the new switch.
i havent got the new one yet, its hard to get a socket deep enough to undo it, and cant get a spanner in either...
#10: Re: oil pressure switch.. Author: MrBSI, Location: What's it to you? ? ?Posted: Sat Oct 13, 2012 8:48 am ----
KrishanK wrote:
MrBSI wrote:
KrishanK wrote:
macca1411 wrote:
Remove the wire and unscrew it. To refit do the opposite, replacing the sealing washer though.
does anybody know which socket i need to remove it? the sensors hard to get to..
Why dont you try your sockets on the new switch.
i havent got the new one yet, its hard to get a socket deep enough to undo it, and cant get a spanner in either...
Buy the new switch, take it to Halfords & find a deep socket that fits it, take the socket to the till & pay for it.
#11: Re: oil pressure switch.. Author: simonster_14, Posted: Sat Oct 13, 2012 10:20 am ---- i just did mine on a 1.6 hdi was a nightmare, i took the doser unit(if you have one off) on top of the engine,
took the aircondition pump (again if you have a/c)off underneath and pushed it out towards the wheel and took the altenator off.
this it was 22mm? i used a ring spanner to do mine
took me about 2 hours to do because i tested pressure same time...
id get a sensor from peugeot 1st because this is not a job you want to do twice
hope that helped:)
#12: Re: oil pressure switch.. Author: KrishanK, Location: LeicesterPosted: Fri Oct 19, 2012 5:44 am ----
simonster_14 wrote:
i just did mine on a 1.6 hdi was a nightmare, i took the doser unit(if you have one off) on top of the engine,
took the aircondition pump (again if you have a/c)off underneath and pushed it out towards the wheel and took the altenator off.
this it was 22mm? i used a ring spanner to do mine
took me about 2 hours to do because i tested pressure same time...
id get a sensor from peugeot 1st because this is not a job you want to do twice
hope that helped:)
thanks it did help, changed it.. the oil light has stopped coming, but the stop sign is still flashing away along with the temperature gauge flickering up and down...
#13: Re: oil pressure switch.. Author: V9977, Location: Athens, GreecePosted: Fri Oct 19, 2012 11:39 am ---- Sounds like your engine coolant temp sensor is disconnected.
#14: Re: oil pressure switch.. Author: KrishanK, Location: LeicesterPosted: Sat Oct 20, 2012 4:18 am ----
V9977 wrote:
Sounds like your engine coolant temp sensor is disconnected.
Where is the engine coolant temp sensor located and is it a long process to replace?
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17132
Online Now [569]:
Visitors: 568
Members: 0
Staff Online Now:
Page Views:
General
