#1: Fasten seatbelt light Author: Jay0913, Posted: Thu Sep 13, 2012 4:17 pm ---- Hi guys, ive just bought my peugeot and ive got a proble
With the fasten seatbelt light, at least thats what i think it is, i took a photo but its not very clear, maybe someone will be able to tell from the position of it what light it is
It wont switch off and i dont know why!! Someone please help?? Thanks
#3: Re: Fasten seatbelt light Author: btownsend06808, Location: Northallerton (N Yorkshire)Posted: Thu Sep 13, 2012 5:32 pm ---- This happened on mine I just disconnected battery for half hour and it turned off
#4: Re: Fasten seatbelt light Author: MrBSI, Location: What's it to you? ? ?Posted: Fri Sep 14, 2012 2:56 am ---- Looks more like a non plexed 206 side airbag warning light.
#5: Re: Fasten seatbelt light Author: iainlovatt, Posted: Fri Sep 14, 2012 7:16 am ---- can u not get a better pic?
Looks more like a non plexed 206 side airbag warning light.
I agree.
The seat belt light should be red, although the pic is that bad it could be anything.
I would try reactivating the passenger side airbag using the switch first just to rule that one out. The warning light is in a similar area to the pic.
#7: Re: Fasten seatbelt light Author: Jay0913, Posted: Fri Sep 14, 2012 8:20 am ---- SOrry ill get a better picture when i get my cr back from the garage, getting both wishbones replaced.
#8: Re: Fasten seatbelt light Author: Jay0913, Posted: Sun Sep 16, 2012 5:46 pm ---- Ive had a look in the manual and the light is the side airbags light can anyone tell me why it stays on?? Its really annoying
#9: Re: Fasten seatbelt light Author: MrBSI, Location: What's it to you? ? ?Posted: Mon Sep 17, 2012 9:25 am ----
Jay0913 wrote:
Ive had a look in the manual and the light is the side airbags light can anyone tell me why it stays on?? Its really annoying
It stays on because there is a fault with the side airbag system.
With the ignition key REMOVED! ! !
Look under each front seat & check both the green & the red connector plugs, disconnect them both & give them a spray of electrical contact cleaner then reconnect them again.
If that doesnt cure it then you will have to have the srs system scanned for fault codes.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 1
Overall: 17133
Online Now [75]:
Visitors: 74
Members: 0
Staff Online Now:
Page Views:
General
