#1: Brake Disc Help! Author: Simon2710, Location: LeedsPosted: Sun Sep 23, 2012 8:08 am ---- Hi,
I have just bought some QH (Quinton Hazell) brake discs from my local motor factor. I didn't really pay much attention to detail so if the part is incorrect that's my fault! I have put the front brake discs on fine, but the caliper won't fit? It fit the old brake discs. Could this be because these may be rear brake discs they have given me (my rear brakes are drums) or just the incorrect part. I'm also not sure whether my car is 16v or 8v which might also be a problem. I have a 206 1.6 GLX 2000. Anyway I could find this out? And could someone please provide a link to maybe Ebay/another site with correct front brake discs please?
Many thanks!
#2: Re: Brake Disc Help! Author: Andrew, Location: Black Country Ay IPosted: Sun Sep 23, 2012 8:12 am ---- The discs would be smaller than the old ones if they gave your rear ones. Chances are you've been given discs for another peugeot like a 307, which use the same diameters, but will have the wrong offset causing the disc to sit further in or out than the correct ones. Take them back for a swap, they should be obliging to help you.
#3: Re: Brake Disc Help! Author: jk206, Location: GainsboroughPosted: Sun Sep 23, 2012 8:13 am ---- Disc must be slightly thicker than the stock disc, you will need new calipers
#4: Re: Brake Disc Help! Author: Simon2710, Location: LeedsPosted: Sun Sep 23, 2012 8:17 am ---- Thanks for the replies, any ideas on calipers and where I can get these? The brake discs seem correct, on the box it states 206 1.6i?
#5: Re: Brake Disc Help! Author: DeadEyePaul, Location: Rugby,WarwickshirePosted: Sun Sep 23, 2012 8:20 am ---- Did you move the caliper pistons back before removing old discs?
#6: Re: Brake Disc Help! Author: Steve206, Location: UKPosted: Sun Sep 23, 2012 8:25 am ---- Might be the wrong offset. The gti 138 changed offsets around 2002. Just take them back if there wrong. Are they vented or solid?
#7: Re: Brake Disc Help! Author: Seabook, Posted: Sun Sep 23, 2012 8:35 am ---- check the box to see if there is any parts number on it.
you need 266x20.5 disc
#8: Re: Brake Disc Help! Author: Simon2710, Location: LeedsPosted: Sun Sep 23, 2012 8:46 am ----
DeadEyePaul wrote:
Did you move the caliper pistons back before removing old discs?
This is before I actually put the piston back on. The caliper that holds the brake pads won't fit.
#9: Re: Brake Disc Help! Author: Simon2710, Location: LeedsPosted: Sun Sep 23, 2012 8:49 am ----
Seabook wrote:
check the box to see if there is any parts number on it.
you need 266x20.5 disc
Thanks, part number from the box says: BDC3508P
#10: Re: Brake Disc Help! Author: Seabook, Posted: Sun Sep 23, 2012 9:00 am ---- that looks like the right disc to me....
have you got the vin? i can check if you got the correct disc?
and have you got the pics of your brake pad? does it got a round end or square end? Last edited by Seabook on Sun Sep 23, 2012 9:05 am; edited 1 time in total
#11: Re: Brake Disc Help! Author: Simon2710, Location: LeedsPosted: Sun Sep 23, 2012 9:02 am ----
Seabook wrote:
that looks like the right disc to me....
have you got the vin? i can check if you got the correct disc?
Yes I'll PM you it, thanks!
#12: Re: Brake Disc Help! Author: Seabook, Posted: Sun Sep 23, 2012 9:08 am ---- yes. you got the wrong disc....
you need 247x20.5 disc.
4246 A7 or 4249 96
#13: Re: Brake Disc Help! Author: Simon2710, Location: LeedsPosted: Sun Sep 23, 2012 9:12 am ----
#14: Re: Brake Disc Help! Author: Seabook, Posted: Sun Sep 23, 2012 9:12 am ---- that looks right to me
#15: Re: Brake Disc Help! Author: Simon2710, Location: LeedsPosted: Sun Sep 23, 2012 9:20 am ----
Seabook wrote:
that looks right to me
Thanks, won't be using that motor factors again! He actually took a book out, I told him all the info (year, engine size etc.). Although why does it say Peugeot 206 1.6i on the box if it doesn't fit? Is it possible this is for newer models?
#16: Re: Brake Disc Help! Author: Seabook, Posted: Sun Sep 23, 2012 10:18 am ----
Simon2710 wrote:
Seabook wrote:
that looks right to me
Thanks, won't be using that motor factors again! He actually took a book out, I told him all the info (year, engine size etc.). Although why does it say Peugeot 206 1.6i on the box if it doesn't fit? Is it possible this is for newer models?
yes, that will fit 1.6 16v and 2.0 gti made before 2000
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [258]:
Visitors: 257
Members: 0
Staff Online Now:
Page Views:
General
